New Products Flash Sale
Thread Tools
This thread is privately moderated by Alex Schauer, who may elect to delete unwanted replies.
Old Sep 16, 2012, 08:10 PM
DJO is offline
DJO
Find More Posts by DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
I can measure resistance in Ohms with my multimeter too.... should I test it out? Never measured resistance before...



Dan
Old Sep 16, 2012, 09:04 PM
Piece is offline
Find More Posts by Piece
Wake up, feel pulse, be happy!
Piece's Avatar
Quote:
I can measure resistance in Ohms with my multimeter too.... should I test it out?
Sigh... No. Not unless you know exactly what you're doing, and precisely what to look for, without someone (me) having to explain it step by step. The more you mess with it, the more likely it is that you'll inadvertently damage it. Just leave it alone until you have a motor to run with it. In all likelihood the thing works just fine. It's not like you were flashing firmware and replacing FETs; all you did was add new leads to the board. Worse case, you go back and redo a joint and it's all better.

Find something else to busy yourself with, Grasshopper
Old Sep 16, 2012, 09:06 PM
DJO is offline
DJO
Find More Posts by DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
Well I caught a thermal on the simulator so that'll keep me busy for the next 2 hours...

Thanks!



Dan
Old Sep 16, 2012, 09:34 PM
Alex Schauer is offline
Find More Posts by Alex Schauer
Registered User
Alex Schauer's Avatar
Quote:
Originally Posted by C₄H₁₀ View Post
Sigh... No. Not unless you know exactly what you're doing, and precisely what to look for, without someone (me) having to explain it step by step. The more you mess with it, the more likely it is that you'll inadvertently damage it. Just leave it alone until you have a motor to run with it. In all likelihood the thing works just fine. It's not like you were flashing firmware and replacing FETs; all you did was add new leads to the board. Worse case, you go back and redo a joint and it's all better.

Find something else to busy yourself with, Grasshopper
So when did you move to AK?
Old Sep 16, 2012, 10:21 PM
nforbesrc99 is offline
Find More Posts by nforbesrc99
Jet guy w/ no money to buy jet
nforbesrc99's Avatar
My mSR is awesome!!!! It so fast once I get it going!!!!!!! I can already hover nose in and out, fly forward, and fly in circuits!!!! mcpx is coming up next!!! I'm still stayin mainly in planes. But I love my mSR!!!
Old Sep 16, 2012, 10:22 PM
Piece is offline
Find More Posts by Piece
Wake up, feel pulse, be happy!
Piece's Avatar
I left on the 28th and landed a little after midnight (local time) on the 29th. Been here about 2.5 weeks already It's crazy; doesn't feel like that long.

College is fun
Old Sep 16, 2012, 10:22 PM
DJO is offline
DJO
Find More Posts by DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
Quote:
Originally Posted by nforbesrc99 View Post
My mSR is awesome!!!! It so fast once I get it going!!!!!!! I can already hover nose in and out, fly forward, and fly in circuits!!!! mcpx is coming up next!!! I'm still stayin mainly in planes. But I love my mSR!!!
Sounds good. But believe me that thing will be sloooooooooooow once you get an mCPX in high rates...



Dan
Old Sep 16, 2012, 10:23 PM
nforbesrc99 is offline
Find More Posts by nforbesrc99
Jet guy w/ no money to buy jet
nforbesrc99's Avatar
I got it at the LHS swap meet 25 bucks, with the heli, charger, 2 lipos and extra blades, landing skids and other stuff!!!! Best deal ever!!!!! I'm gonna get a scale body kit for it.
Old Sep 16, 2012, 10:28 PM
Park_aviator is offline
Find More Posts by Park_aviator
3D, 1D at a time!
Park_aviator's Avatar
Quote:
Originally Posted by C₄H₁₀ View Post
I left on the 28th and landed a little after midnight (local time) on the 29th. Been here about 2.5 weeks already It's crazy; doesn't feel like that long.

College is fun
Ok... Let's get on to what matters... How are the ladies?
Old Sep 17, 2012, 10:23 AM
RCSwitz18 is offline
Find More Posts by RCSwitz18
Registered User
RCSwitz18's Avatar
@%*@!#%@%@@%@3 GAH!

Im super nervous for today. I'm taking my driving test!!!!!!!

Wish me luck!


PS. HAPPY BIRTHDAY PARK_AVIATOR!
Old Sep 17, 2012, 10:32 AM
nforbesrc99 is offline
Find More Posts by nforbesrc99
Jet guy w/ no money to buy jet
nforbesrc99's Avatar
Oh yeah!! Happy bday!!!!!!!! Park_Aviator!!
Old Sep 17, 2012, 06:54 PM
DJO is offline
DJO
Find More Posts by DJO
DJO
"Yo, that's a thermal"
DJO's Avatar




Dan
Old Sep 17, 2012, 07:00 PM
scrub monkey is offline
Find More Posts by scrub monkey
use the 4s luke, use the 4s...
scrub monkey's Avatar
Happy bday park aviator.
Old Sep 17, 2012, 07:30 PM
Jeremy Kamutzki is offline
Find More Posts by Jeremy Kamutzki
Obeying the law of gravity
Jeremy Kamutzki's Avatar
Quote:
Originally Posted by DJO View Post
Sounds great! Have fun!

Just got this all soldered up for the PopWing coming in the mail tomorrow... just needs to be soldered to the motor. Not sure if it works though, it's a year old and from my SkyFun jet (first plane ever ). I completely ripped apart the shrink wrap, soldered on new motor connectors, as well as a completely new Deans lead, and a new, longer receiver connector (servo plug) lead also. So it's basically all new...

Electrical tape over everything except for the heat sink. It was covered by heat shrink to start with, but I think that it will cool down better without anything covering it.

Result came out pretty good IMO! How can I test if it works without hooking a motor up to it (no spare motors around right now)?

Most likely won't be getting my LHS to put bullets on this... just going to directly solder it to the motor. Much easier. Plus I don't have any bullets lying around, and I still don't know how to solder them LOL





Dan
soldering bullets is super easy. just watch this video. Also, the ESC looks nice.

How to Solder Bullet Connectors to Brushless Motors and ESC (8 min 15 sec)
Old Sep 17, 2012, 07:32 PM
Jeremy Kamutzki is offline
Find More Posts by Jeremy Kamutzki
Obeying the law of gravity
Jeremy Kamutzki's Avatar
Quote:
Originally Posted by alexjschauer View Post
So does anyone want a CHEAP 450 brushless carbon fiber clone??!?!?!
$120 shipped, it could be yours!
https://www.rcgroups.com/forums/show....php?t=1732559
ooh, really interested, but A: I'd probably crash it right away and B: I've spent enough money recently. too bad.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion GENERAL CHIT CHAT - advice, videos, cool stuff, new toys, reports, articles, ideas AussieJarred Dynamic Soaring 1209 Dec 01, 2016 12:05 PM
Discussion Official Eflite UMX Mig 15 DF Owners Thread NitroCharged Micro EDF Jets and Power Systems 5652 Oct 04, 2016 06:34 PM
Contest Chit Chat Thread With one Rule: You must reply to poster above you and be relevant! HoaRC Chit Chat 25 Aug 08, 2013 02:48 AM
Discussion General Chit Chat...... Keenan smith RC Airliners (Commercial, Cargo, Troop Carrier) 38 May 28, 2012 06:03 PM