THE ALL NEW FPV Dream Machine Tricopter is available NOW!!!
OK here it is everyone finally ready for the consumers (AKA) you guys/gal's
Luis the creator of the FPVDM tricopter and myself have been working hand and hand trying to create the ultimate FPV tricopter kit. I started with his v1.3 frame and from there i beta tested it and from there id tel luis what needed to be fixed and upgraded id get the next frame that had changes to it then test and test and test. untill i found what needed to be upgraded or changed until finally i wasnt able to make anything better. Luis and i feel the FPVDM v1.5 is hands down the best Tricopter FPV frame available. watch the video for more info thanks
get the frame at myrcbuild.com.
**PRE-ORDER This frame will start to ship in 1.5 weeks***
** Version with Pivot control will also be made available after further testing **
note: parts are interchangeable.
THE 1.5 FPV Dream Machine
Frame comes with all hardware needed.
And screws also for motors, ( 3mm or 2.5mm Just ask for what you need)
PRICE INCLUDES SHIPPING - WILL SHIP FOR FREE. This items ships via POST (first class mail) **you may request EMS**. ( Shipping world wide )
The FPVDM is simply a FPV Pilots Dream.. why ? here is what is included.
Options, Options and More Options.... did I mention Options ?
1. All hardware needed is included
2. Booms are include wood ( 3/8 or 1/2 Wood booms)
3/8 are clamped via screws - Only one hole to drill
1/2 are secured via center hole ( tail screws are flush mounted - ie flat head screws)
3. Booms can be secured via screws or zip ties.
Good to fold back quickly for travel
Good for breakaway action in even of crash
4. Front boom can be configured in a Yshape or T shape
5. Tail boom
Can use clamp style mount ( 3/8 boom)
Can use through bolt (1/2 boom) for flush mount so no screws stick into your battery
6. Tail control has been described as BULLET PROOF
Construction is G10 and 1/4 in - Acetal
7. Motor Mounts
Bolt pattern for ( 16x19mm motors - NX400 - DT750 - and more .. )
Motor Cage - Life Saver - Protects your motor case in event of a crash
***** will have two version for 30mm size motors and 45mm size ***
Please let me know what size you like.
8. Landing Gear
Allows for quick installation via zip ties.
Allows for 1/2 boom install
Allows for 3/8 boom install
9. Frame Body
Top frame is made of 2.3mm thick G10
Lower Frame is made of 1.5mm G10
Connection of top and bottom is done via 1.5 in standoffs
giving plenty of space for components to be mounted.
** Lower plate is soft mounted to top plate via foam shop absorbers.
10. Battery Slots
Frame has battery straps in key locations, main sets are in the rear for two different
size batteries both on lower and top plate
11. Flight board Mounting
Frame has bolt pattern for two different size board
Board can be mounted on TOP or bottom.
Booms are Wood ( intended to break away while you learn to fly)
Frame body 2.3mm and 1.5mm G10
Frame body has vertical spars to make it super strong
Motor Mounts and Cages - G10 2.3mm
Tail Control 2.3mm G10 and 1/4 in Acetal
90% of the frame uses metric screws ( Top Quality Socket head Screws)
Standoffs are Aluminum and ( 4-40) socket head screws ( top Quality also)
14 Recommended Setup
While the frame allows for you to test with many diff rent components.
it has been tested with by many pilots, from them 80% of testing was done with NX400 Motors on 10in props 4S battery,
Last edited by flohio117; Aug 19, 2012 at 11:20 AM.
I'm not sure how well dt750s work bc I've never used them but I'm sure someone else will be able to comment on those motors.
I'm in the process of editing the fpv flight video. It should be up by Sunday.
I have the DT750 .. running on 4S .. 3.3mAh pack.. 10in props.. I only get.. 6min of flying.. But I'm 3400 feet above see level..
From what Flohio.. has told me.. nx4008 have tons of power.. get longer flights..
and are made for.. 4S ..
I have some in the mail now what frame to put them on..
new video Heres what a flight looks like with a bunch of brown outs and a crasl landing in someones yard! check out how i get out of the yard
please thumbs up if you like it!
You're tempting me with this FPV Dream Machine airframe... Must resist the force.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||8 NIB JR Radio Systems (all new old stock!!!!) Available Seperately||FNW||Aircraft - General - Radio Equipment (FS/W)||7||Sep 09, 2012 07:46 PM|
|For Sale||iconic-X FPV frame available now :)||whosYOURdaddy - QuadAddict||Aircraft - Electric - Multirotor (FS/W)||0||Jul 20, 2012 09:23 AM|
|Discussion||FPVDM - FPV Dream Machine (Tricopter) by MyRcBuild||airbagit13||FPV Talk||14||May 18, 2012 12:56 AM|
|Build Log||FPV/UAV/AP tricopter build log [Changed from "Got the stuff... I went all out"]||slisgrinder||FPV Talk||47||Jul 25, 2011 09:57 AM|
|Now Available: 1/8" GWS Drilled Pinions and Machined GWS Boxes for Astroflight BL||WJ Birmingham||Parkflyers||5||Jul 28, 2003 11:17 AM|