Thread Tools
Aug 20, 2012, 04:26 PM
Registered User
I bought a ladybird clone on eBay and it is terrible to control compared to the ladybird.
Sign up now
to remove ads between posts
Aug 20, 2012, 04:40 PM
Addict.
I'm about 99% sure it'll bind with the 9x, but I guess it remains to be tested until someone actually has one.

And don't expect any of these clones to be as good as the walkera, they all have gyros only. The original ladybird flies so good because it has gyro and accelerometer.
Aug 20, 2012, 05:19 PM
Flying mostly micro's
BlueHavoc's Avatar
Quote:
Originally Posted by skitchen8
I'm about 99% sure it'll bind with the 9x, but I guess it remains to be tested until someone actually has one.

And don't expect any of these clones to be as good as the walkera, they all have gyros only. The original ladybird flies so good because it has gyro and accelerometer.
Several of the clones have accellerometers also, such as the MJX X100 (3 gyro 3 accelerometers) and also the Mini Pet, (same setup I believe) both are advertised as "6 axis" Some reviews are saying even better than the ladybird with better construction... I do not own one so I cannot speak to that, but I have seen reviews from people claiming to own both and saying that...
Last edited by BlueHavoc; Aug 20, 2012 at 05:26 PM.
Aug 20, 2012, 05:29 PM
Addict.
I stand corrected... don't expect most of them to be as good

Thank you for correcting that

Is there a mqx/929 size with both?
Aug 20, 2012, 05:34 PM
Flying mostly micro's
BlueHavoc's Avatar
Quote:
Originally Posted by skitchen8
I stand corrected... don't expect most of them to be as good

Thank you for correcting that

Is there a mqx/929 size with both?
Not that I know of yet, just the tiny ones as far as I know!
Aug 20, 2012, 05:58 PM
Registered User
Quote:
Originally Posted by skitchen8
I'm about 99% sure it'll bind with the 9x, but I guess it remains to be tested until someone actually has one.

And don't expect any of these clones to be as good as the walkera, they all have gyros only. The original ladybird flies so good because it has gyro and accelerometer.
Its not the lack of accelerometer, it's the control, doesn't feel proportional, such as give it a bit of rudder and it overshoots when you stop, almost like it does a preset amount of yaw.
Aug 20, 2012, 06:03 PM
Addict.
What model was it?
Aug 20, 2012, 06:21 PM
Registered User
http://www.ebay.com.au/itm/300739923858
Aug 20, 2012, 06:22 PM
Registered User
Well built though, aluminium arms.
Aug 20, 2012, 07:33 PM
Registered User
Quote:
Originally Posted by doonunder
That looks like the SH6043 I have, which is now collecting dust due to a spoilt motor. I agree that the control is lousy, but that is probably a result of the vague feel of the transmitter sticks. It does have very good self-stabilising abilities, so I wouldn't say its really a poor product.

I am eagerly awaiting the arrival of my Walkera Ladybird (Devo 4 model) and also the Mini-pet.
Aug 20, 2012, 07:52 PM
Registered User
OnceAFly's Avatar
I have both LB and SH6043 in compare, LB stand out hand down where the clone's control really like having lots of expo.
Aug 20, 2012, 08:17 PM
Registered User
Quote:
Originally Posted by OnceAFly
I have both LB and SH6043 in compare, LB stand out hand down where the clone's control really like having lots of expo.
Is the LB the Devo4 version? I am quite curious as to how the Devo4 version can execute the flips.
Aug 20, 2012, 08:19 PM
Registered User
Quote:
Originally Posted by TFMeouch
Is the LB the Devo4 version? I am quite curious as to how the Devo4 version can execute the flips.
By a stick sequence on the tx when powering on the bug, this changes the flight mode. Flips are not very tight and you need lots of height.
Wish I could bump up the throws.
Aug 20, 2012, 08:30 PM
Registered User
Quote:
Originally Posted by doonunder
By a stick sequence on the tx when powering on the bug, this changes the flight mode. Flips are not very tight and you need lots of height.
Wish I could bump up the throws.
Ok, so I suppose the flight mode switches to 3D upon activating that sequence? Is the flip pre-programmed like the other clones? I flip my SH6043 by pushing the elevator/ailerons to the maximum and I'm not too sure if it is the same for Devo4.

As for height clearance, I think its quite expected. I am not expecting very tight flips from these QRs. Usually I will give it about 3 metres clearance at least before I attempt to execute a flip.
Aug 20, 2012, 08:38 PM
Vids: YouTube.com/FyreSG
FyreSG's Avatar
How do we tell that these tiny quads are truly 3 gyros + 3 accelerometers, and not some marketing crap? Just a wild guess - they could have copied the V929, which only has 3 gyros.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Suggestion Personal attack Rule as it applies to Trader Talk Thread Titles porcia83 Site Suggestions / Complaints 3 Jul 27, 2012 11:58 AM
For Sale Quadcopter Parts Sale Thread mfkubak Aircraft - Electric - Multirotor (FS/W) 10 Jul 26, 2012 02:33 PM
Discussion Why are there so many heli threads in the Airplane Micro RTF forum? Bowerz Site Chat 38 Dec 15, 2009 06:43 PM
Wattage RTF Micro Flyer (thread #2) Skyshark Scratchbuilt Indoor and Micro Models 233 Sep 17, 2009 02:22 PM
Wattage RTF Micro Flyer (thread #1) Bleriot Scratchbuilt Indoor and Micro Models 384 Dec 15, 2004 02:28 PM