Wing Wing Z-84 - Page 9 - RC Groups
Thread Tools
Oct 19, 2012, 04:42 AM
Glow 😡 no no no
Quote:
Originally Posted by gazza2003au
bugger i have 6 or 8 packs of the 4S 1500mah's so far they've been good theres a thread here on them https://www.rcgroups.com/forums/show....php?t=1607931
I checked the IR on my Icharger 206b and the 1300 came up best and the 2200 the worst, I am planning to leave the Z84 the way it is, I currently have a new Funjet ready to go and want to finish my new F27c stryker the same as the old one.
Sign up now
to remove ads between posts
Oct 19, 2012, 06:36 AM
The Need4Speed
fooyukvoon's Avatar
Guys,

Just got JungleGym's reply on his setup. He installed his EDF pointing slightly upwards. B'cos of the weight of the EDF, he still needed to add ballast even with the 4S 2200mah pack.

Foo
Oct 19, 2012, 06:45 AM
Glow 😡 no no no
Quote:
Originally Posted by fooyukvoon
Guys,

Just got JungleGym's reply on his setup. He installed his EDF pointing slightly upwards. B'cos of the weight of the EDF, he still needed to add ballast even with the 4S 2200mah pack.

Foo
I'm not surprised he needed ballast, goes along with my findings lol.
Oct 21, 2012, 11:33 AM
The Need4Speed
fooyukvoon's Avatar
Guys,

Do you think the Wing Wing can take a Scorpion HK2221-8 3565kv Outrunner on an APC 5x5 (3S 2200mah - Prop Speed : 236 , Static Thrust : 798, Current : 42 Amps) ?

Is it too much for this little wing to handle?

Gonna measure the mounting now.....

Foo
Oct 21, 2012, 03:33 PM
Glow 😡 no no no
Quote:
Originally Posted by fooyukvoon
Guys,

Do you think the Wing Wing can take a Scorpion HK2221-8 3565kv Outrunner on an APC 5x5 (3S 2200mah - Prop Speed : 236 , Static Thrust : 798, Current : 42 Amps) ?

Is it too much for this little wing to handle?

Gonna measure the mounting now.....

Foo
The most important piece of information is what you missed, the weight ?.
Oct 21, 2012, 03:46 PM
Glow 😡 no no no
Quote:
Originally Posted by fooyukvoon
Guys,

Do you think the Wing Wing can take a Scorpion HK2221-8 3565kv Outrunner on an APC 5x5 (3S 2200mah - Prop Speed : 236 , Static Thrust : 798, Current : 42 Amps) ?

Is it too much for this little wing to handle?

Gonna measure the mounting now.....

Foo
Ok so it weighs 79 grams, seeing its a heli motor i am guessing that you cant push the shaft out the other end, so it will need to be mounted inside, this will help with CofG, but it's going to be cramped in there lol.
It will fit as long as you reverse the motor mount around and install it in backwards, you will still need to remove some foam to allow the motor wires to get passed the motor and not rub.
Oct 21, 2012, 07:53 PM
The Need4Speed
fooyukvoon's Avatar
It fits but with just a very small gap between the motor and the foam hatch. Looking at it, cooling for the motor will only come from the 2 little holes underneath the front. And if I use the motor as is, I'll have to make a face plate that will block all air flow coming out too.

Sure was tempted to use that motor but I think I better stick with another outrunner that I have. (it's a 26mm 2750kv outrunner) and move this to my bigger wing.

Foo
Oct 21, 2012, 08:59 PM
Glow 😡 no no no
Quote:
Originally Posted by fooyukvoon
It fits but with just a very small gap between the motor and the foam hatch. Looking at it, cooling for the motor will only come from the 2 little holes underneath the front. And if I use the motor as is, I'll have to make a face plate that will block all air flow coming out too.

Sure was tempted to use that motor but I think I better stick with another outrunner that I have. (it's a 26mm 2750kv outrunner) and move this to my bigger wing.

Foo
yeah that was my call as well.
Oct 24, 2012, 12:52 PM
Soaring Fanatic!
8thelephant's Avatar
Has anyone tired the WingWing Z-84 on the slopes yet?
Oct 28, 2012, 11:46 PM
Registered User
i have the same idea. maybe we can get some surprise after try.
Oct 29, 2012, 02:03 AM
Glow 😡 no no no
Quote:
Originally Posted by 8thelephant
Has anyone tired the WingWing Z-84 on the slopes yet?
I believe it should be great, give it a go.
Nov 05, 2012, 02:15 AM
Registered User
Quote:
Originally Posted by rcfanfun
i have the same idea. maybe we can get some surprise after try.
give it a go
Nov 09, 2012, 07:03 AM
Registered User
Wing Wing Z-84 131km/h (2 min 1 sec)

Z-84 'WingWing' at Fort Funston (2 min 1 sec)

Wing wing z84 hobbyking (0 min 41 sec)

[Zeta] Z-84 Wing wing (1 min 2 sec)

Wing Wing Z 84 50mm EDF 4s (2 min 43 sec)

[ZETA] Wing wing Z-84 (3 min 17 sec)

ZETA wing wing z-84 Flying (1 min 41 sec)

Wing Wing Z-84 (1 min 50 sec)

Asa voadora 85 cm (1 min 31 sec)

Wing Wing Aufbau Movie supported by Ready2fly.com (7 min 29 sec)

Wing Wing Fly Video supported by Ready2fly.com (2 min 36 sec)

Wing Wing X-84 (1 min 25 sec)

Wing-wing Z84 無尾翼機 PNP完成機(EPO) (3 min 51 sec)

Zeta Science Wing Wing Z84 変わった場所で飛ばしてみました (3 min 14 sec)

Wing-Wing (3 min 35 sec)
Last edited by chul00; Nov 09, 2012 at 11:55 AM.
Nov 16, 2012, 03:54 AM
"We gave them the bird...."
BennyT's Avatar
Arrived home late last night and my wing wing was in a box by the table for me! Excited!

Pulled it out and love the packaging and overall appearance.

Maybe time for a build thread.....what do you guys think?

Ben
Nov 16, 2012, 04:56 AM
Glow 😡 no no no
Quote:
Originally Posted by BennyT
Arrived home late last night and my wing wing was in a box by the table for me! Excited!

Pulled it out and love the packaging and overall appearance.

Maybe time for a build thread.....what do you guys think?

Ben
Sounds like a great idea, maybe this is a build thread lol.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Idea Strengthening nose and wing of um t-28 Trojan djsoccerstar5 Scratchbuilt Indoor and Micro Models 13 May 19, 2012 11:10 PM
Wanted Parkzone 3-Blade Prop, 9 x 7.5: F4U Corsair, T-28 Trojan Timewarp Aircraft - General - Miscellaneous (FS/W) 1 Apr 02, 2012 03:35 AM
Wanted 1/3 scale newport bipe 28 wing jetboyta Aircraft - Fuel - Airplanes (FS/W) 0 Mar 07, 2012 04:10 PM
Question e-flight outrunner w/ (?x? prop.) on a 28" wing and 3 cells=FAST????? Sammy B Foamies (Kits) 13 Jan 27, 2005 11:34 AM