Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 03, 2012, 01:39 PM
DynamicFoamy's Avatar
Quote:
Originally Posted by electricrc68
I'd still like to know if the kit comes precut...
Yes laser cut. Little sections here and there that keep it in the sheet stock for shipping protection.
Latest blog entry: Customer Support Forum
Sign up now
to remove ads between posts
Aug 03, 2012, 01:46 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
Quote:
Originally Posted by DynamicFoamy
Yes laser cut. Little sections here and there that keep it in the sheet stock for shipping protection.
Okay thanks. But the ones in the sheet pop right out correct?
Aug 03, 2012, 01:55 PM
Suspended Account
Yeah its like a guillows balsa kit. It just pops out and you have to be careful not to break it
Aug 03, 2012, 02:02 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
oh okay thanks. I'll try not to break it.
Aug 03, 2012, 02:11 PM
Micro Flyer, Big Poster
Pete P's Avatar
FYI the V911 tail prop is about the same as the AeroAce prop, puts out the same amount of thrust, but weighs .5g less.

Also, I dont recommend using the prop at WOT for more than 15 seconds at a time- The motor is really not meant for .8A constantly, but can certainly take it in blips and spurts. I'd recommend less than .6A maximum for 15 minute flights.
Aug 03, 2012, 04:40 PM
Kev Waite
Flying Horizons's Avatar
For the guys in the UK we will be ordering some of these next week from Dynamic Foamy, keep any eye out for them at Totem Hobbies soon, www.totemhobbies.co.uk .

As we are dealers for Dynamic Foamy in the UK we order in quantity so it will help with the cost of shipping from the USA.

Kevin
Totem Hobbies
Aug 03, 2012, 11:44 PM
Registered User
OK, I am close to making a new order from banggood. The tail motors are so fragile, can a main motor for a little heli be used? But then I guess it will be tail heavy and it will be hard to mount the pusher prop which already fits the tail motor perfectly. I guess you get long run times but I better order a few extra motors.
Aug 04, 2012, 02:30 AM
We can rebuild it!
djdavies83's Avatar
Quote:
Originally Posted by rcpaintfx
For the guys in the UK we will be ordering some of these next week from Dynamic Foamy, keep any eye out for them at Totem Hobbies soon, www.totemhobbies.co.uk .

As we are dealers for Dynamic Foamy in the UK we order in quantity so it will help with the cost of shipping from the USA.

Kevin
Totem Hobbies
Sweet, any idea how how much I would I be looking at to get the DF380 with shipping?
Aug 04, 2012, 02:32 AM
We can rebuild it!
djdavies83's Avatar
Hi Shahram 72, if you got a micro drill bit set off eBay you could easily open the prop up a little to take the bigger shaft, you would only need to twist the bit by hand.
Aug 04, 2012, 09:21 AM
Power Wheels Guru
UNGN's Avatar
How much thrust does an MCPX tail rotor produce?

Has anyone tried the Tail rotor prop on a flyzone albatros/DR1 7mm? those are only $3 and seem to make good RPM.

With 2 $1.5 props and 2 $3 motors, you could have twice the thrust for the same cost and only about 4g in additional weight.
Aug 04, 2012, 09:52 AM
Kev Waite
Flying Horizons's Avatar
I will be able to give you a better idea of total cost when I find out the shipping cost to us. I will pm you when I know.

Kevin
Aug 05, 2012, 11:51 AM
DynamicFoamy's Avatar
DF-11 video

DF-11 Micro Airliner (2 min 1 sec)
Latest blog entry: Customer Support Forum
Aug 05, 2012, 12:35 PM
QuAd FaNaTiC
Razors edge 29's Avatar
Nice

Looking forward to getting my hands on these
Aug 05, 2012, 07:47 PM
Micro Boat Forum Founder
boredom.is.me's Avatar
Here is a motor. $3
Aug 05, 2012, 09:40 PM
DynamicFoamy's Avatar
DF-747 video added

DF-747 Micro Airliner (2 min 2 sec)
Latest blog entry: Customer Support Forum


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product ***NEW*** ACIES6400 Micro pusher jet by:DYNAMIC FOAMY DynamicFoamy Scratchbuilt Indoor and Micro Models 118 Aug 27, 2013 09:29 PM
Question Foamie Airliners Nate95 Electric Plane Talk 4 Jul 04, 2012 10:37 AM
New Product ******NEW YAK-55 Micro by DYNAMIC FOAMY******* DynamicFoamy Scratchbuilt Indoor and Micro Models 47 Mar 10, 2012 02:48 PM