****** NEW Micro Airliners by DYNAMIC FOAMY*********** - Page 4 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 02, 2012, 08:14 PM
DynamicFoamy's Avatar
Quote:
Originally Posted by djdavies83
This DF 380 Looks good so when funds are there I may get one, what's the shipping cost to the UK?

Could QR ladybird motors and props be used?




http://hobbyking.com/hobbycity/store...idCategory=593
UK is showing $20-$40 shipping USPS, Let me try a few things and see if I can get a better idea and rate?
Latest blog entry: Customer Support Forum
Sign up now
to remove ads between posts
Aug 02, 2012, 08:18 PM
Suspended Account
Could I put in the gear from an airhogs jet set? Just a simple 2 channel setup....... it gets about ten minutes of flight.
Aug 02, 2012, 08:33 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
Alright, im going to be ordering a MCPX tail rotor and the DF-380 this weekend...the day after they are released. Im going to be trying the Ember 2 motor. Dynamicfoamy, what do you use to mount the electronics and how do you mount the brick and motor to the plane?
Aug 02, 2012, 09:36 PM
DynamicFoamy's Avatar
Quote:
Originally Posted by electricrc68
Alright, im going to be ordering a MCPX tail rotor and the DF-380 this weekend...the day after they are released. Im going to be trying the Ember 2 motor. Dynamicfoamy, what do you use to mount the electronics and how do you mount the brick and motor to the plane?
Hot melt for the Rx and CA (foam safe) for the motor (two small drops)
Latest blog entry: Customer Support Forum
Aug 02, 2012, 10:07 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
Okay thanks. I dont have CA...will hot melt work there too?
Aug 02, 2012, 11:22 PM
Suspended Account
What else? Welders might work......... GG too
Aug 02, 2012, 11:23 PM
Micro Boat Forum Founder
boredom.is.me's Avatar
I would avoid GG. Do you really want that yellow stuff on your white plane?

I like Beacon Foam Tac.
Aug 02, 2012, 11:27 PM
Suspended Account
Good point. Would epoxy be too heavy?
Aug 02, 2012, 11:32 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
I dont know what gorilla glue you guys are using, but mine dries white....not sure why.
Aug 02, 2012, 11:37 PM
Micro Boat Forum Founder
boredom.is.me's Avatar
That's right, there is a white GG out now. The easiest it is just a dab of hot glue on either side though.
Aug 02, 2012, 11:39 PM
Suspended Account
I've heard bad things about the white GG turning into the consistency of bubblegum in intense heat. I wouldn't put in on a plane.
Aug 02, 2012, 11:41 PM
The Sweet Aroma of Fuel
electricrc68's Avatar
Okay thanks guys. I think i will just try hot glue.

RCAddict16- actually, that is very true. I only use the gorilla glue to repair foam parts, but i once heated it up with a hot glue gun by accident (dont ask ) and it became like a bubblegum sort of texture.
Aug 03, 2012, 05:26 AM
We can rebuild it!
djdavies83's Avatar
Quote:
Originally Posted by DynamicFoamy
UK is showing $20-$40 shipping USPS, Let me try a few things and see if I can get a better idea and rate?
It may be another month or two till I have funds but if the total for product and shipping is for arguments sake $55 I would have to say I'm out.

I have an idea for UK customers to get these kits, I'll look into it and send you a message.
Aug 03, 2012, 05:30 AM
We can rebuild it!
djdavies83's Avatar
Quote:
Originally Posted by RCAddict16
Could I put in the gear from an airhogs jet set? Just a simple 2 channel setup....... it gets about ten minutes of flight.
Idont see why not, of course you would have to mount the motors on the wings like the airhogs jet, I would say that it would be of no use outside unless it is absolutely ZERO wind, I have 3 airhogs Xtwin 3ch plane that also have elevator and I only ever got one of them to fly in a large courtyard of a building complex that was very shielded from what little wind there was.
Aug 03, 2012, 07:05 AM
DynamicFoamy's Avatar
Quote:
Originally Posted by djdavies83
It may be another month or two till I have funds but if the total for product and shipping is for arguments sake $55 I would have to say I'm out.

I have an idea for UK customers to get these kits, I'll look into it and send you a message.
Its hard to find good rates for shipping outside the USA now a days. It costs us $13 +carton just to ship coast to coast in the USA.
Latest blog entry: Customer Support Forum


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product ***NEW*** ACIES6400 Micro pusher jet by:DYNAMIC FOAMY DynamicFoamy Scratchbuilt Indoor and Micro Models 118 Aug 27, 2013 10:29 PM
Question Foamie Airliners Nate95 Electric Plane Talk 4 Jul 04, 2012 11:37 AM
New Product ******NEW YAK-55 Micro by DYNAMIC FOAMY******* DynamicFoamy Scratchbuilt Indoor and Micro Models 47 Mar 10, 2012 03:48 PM