Thread Tools
Aug 21, 2012, 11:38 PM
Anything that gives me a High
super kupfer's Avatar
Hi guys, This is a Flight Power 6cell 50c 2600mAh battery in the nose and there is still room
Sign up now
to remove ads between posts
Aug 21, 2012, 11:59 PM
3DHOG
jcdfrd's Avatar
Aug 22, 2012, 12:01 AM
Anything that gives me a High
super kupfer's Avatar
Quote:
Originally Posted by Double E View Post
I could almost imagine a Wemo 70 with intake lip mounted directly above the cheater hole and then clean it up with a custom hatch cover.
So basically turn the cheater hole into a hatch, correct?

Do you think that the fuse being empty as it is would be sufficient enough to work as a duct? It is not sealed as a duct would be (sorry not much experiance with this type of config)

a TJ70 with a 6cell would be sweet in this thing
Last edited by super kupfer; Aug 22, 2012 at 12:08 AM.
Aug 22, 2012, 12:25 AM
Anything that gives me a High
super kupfer's Avatar
This woud be sick in it (4.1Lbs of thrust)

http://www.tamjets.com/original/prod...roducts_id=686

BTW, I just tried to go with a bigger battery and a 6cell 3300mAh just made it in (just).
Aug 22, 2012, 02:00 PM
F-OFF
imyohero's Avatar
I think full ducting would be great, the inlets are around 100% fsa (hyperflow) maybe a little smaller with a good radius say 90%ish.


Again as with the evader to go to a bigger fan the tailcone is the real issue, to get the exit dia to the desired size will require some work maybe even as far as cutting off the cone completely or just a bit to open it up.

Lets toss a few more ideas out there for power systems

I would love to find a motor to push the hyperflow closer to 60k (currently 54-55,000) with full ducting!

Or a hayoe 64mm cut to fit an alfa 60mm housing.

maybe just the full hayoe 64mm or het 6404 with a dons or bigger motor dang it i just dont know! lol

Anyway as you can see by the pics super k posted this is a really well made kit, with lots of room for batts and with the wing being delta and the servos out of the fuse there is so much room for whatever direction you want to go!
Aug 22, 2012, 02:23 PM
Anything that gives me a High
super kupfer's Avatar
Quote:
Originally Posted by imyohero View Post
I think full ducting would be great, the inlets are around 100% fsa (hyperflow) maybe a little smaller with a good radius say 90%ish.


Again as with the evader to go to a bigger fan the tailcone is the real issue, to get the exit dia to the desired size will require some work maybe even as far as cutting off the cone completely or just a bit to open it up.

Lets toss a few more ideas out there for power systems

I would love to find a motor to push the hyperflow closer to 60k (currently 54-55,000) with full ducting!

Or a hayoe 64mm cut to fit an alfa 60mm housing.

maybe just the full hayoe 64mm or het 6404 with a dons or bigger motor dang it i just dont know! lol

Anyway as you can see by the pics super k posted this is a really well made kit, with lots of room for batts and with the wing being delta and the servos out of the fuse there is so much room for whatever direction you want to go!
Not worried about the tailcone at all, If I go with the 70mm unit I intend to just remove the pre installed cone for the hyperflow and shorten the tailcone out to what is needed and just go with a mylar tailcone inside.
Aug 22, 2012, 02:43 PM
Registered User
STANG KILLA SS's Avatar
what is the ideal tail cone size for a 6904 etc?
Aug 22, 2012, 05:44 PM
Anything that gives me a High
super kupfer's Avatar
Personally I like Double E's idea on post #59 &60 but can someone else give me there 2cents on it?
Aug 22, 2012, 05:46 PM
F-OFF
imyohero's Avatar
around 55mm, the best youll get without shortening the outside tailcone is 49mm, might work tho sum one is gonna have to try it
Aug 22, 2012, 05:47 PM
Anything that gives me a High
super kupfer's Avatar
Personally I like Double E's idea on post #59 & 60, but would it work without ducting?
Aug 22, 2012, 06:09 PM
F-OFF
imyohero's Avatar
I think it would, and you can always open the hatch back up if need be.

For me ducting is a fun project, I have nothing against the cheater hole and will probably fly it before installing ducting but i want to nail down what size fan to install so i can start a mould.

I really like the hot 64mm idea! I need a big outrunner, knife liddle style!

I wonder what a js1400 pulls in a 64mm on 4s and 5s
Aug 22, 2012, 06:38 PM
Anything that gives me a High
super kupfer's Avatar
Quote:
Originally Posted by imyohero View Post
I think it would, and you can always open the hatch back up if need be.

For me ducting is a fun project, I have nothing against the cheater hole and will probably fly it before installing ducting but i want to nail down what size fan to install so i can start a mould.

I really like the hot 64mm idea! I need a big outrunner, knife liddle style!

I wonder what a js1400 pulls in a 64mm on 4s and 5s
I wish I can say the same about the ducting but I have never tried making them.
Aug 22, 2012, 07:04 PM
3DHOG
jcdfrd's Avatar
I'm thinking a cs70/10 blade cut down to 65mm in a delta v-480 housing with a bl32 motor on 6s
65c 3300 nano .......whoooah!!!!
Aug 22, 2012, 07:20 PM
Registered User
Double E's Avatar
I need another project like a hole in the head but I might have to go pick one of these up and see what I can do to work out a hotter setup.
Aug 22, 2012, 07:22 PM
Anything that gives me a High
super kupfer's Avatar
That all sounds good guys but why just not go with a 70mm unit?

Come on .........just cut the back.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Great Planes SU-31 E-Performance Series 3D EP ARF platnuim1 Aircraft - Electric - Airplanes (FS/W) 0 Jul 16, 2012 08:31 AM
Sold Great Planes Matt Chapman Eagle 580 GP/EP ARF 53" geebros Aircraft - Electric - Airplanes (FS/W) 1 Jun 25, 2012 09:50 PM
Sold or Trade Great Planes Revolver Sport Aerobatic GP/EP ARF 70" LPU donho1 Aircraft - Fuel - Airplanes (FS/W) 2 Apr 20, 2012 09:38 AM
Sold or Trade Great Planes Revolver Sport Aerobatic GP/EP ARF 70" LPU donho1 Aircraft - Electric - Airplanes (FS/W) 0 Apr 17, 2012 01:54 PM
For Sale RC Plane Great Planes Escapade Sport GP/EP (Plug-N-Play) $175 Diverrcpilot Aircraft - Electric - Airplanes (FS/W) 0 Mar 24, 2012 02:50 PM