Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 16, 2012, 04:15 PM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
2017 EDF Jet Jam, June 15-18
Robert Belluomini's Avatar
Early next week is the best I can do right now.
Sign up now
to remove ads between posts
Old Aug 17, 2012, 10:23 AM
STANG KILLA SS is offline
Find More Posts by STANG KILLA SS
Registered User
STANG KILLA SS's Avatar
looks like replacement parts are all available at tower, if one wanted to buy just the airframe....
http://www3.towerhobbies.com/cgi-bin...=GPMA1802&P=PU
Old Aug 17, 2012, 11:46 AM
alexandermh is offline
Find More Posts by alexandermh
Registered User
alexandermh's Avatar
For about $190 if you add up the basic airframe parts.
Old Aug 17, 2012, 01:39 PM
flygilmore is offline
Find More Posts by flygilmore
Pro Bro #1963
Wow... a bit pricey it seems. I sure do like the looks of this little jet!!
Old Aug 17, 2012, 01:47 PM
Robert Belluomini is online now
Find More Posts by Robert Belluomini
2017 EDF Jet Jam, June 15-18
Robert Belluomini's Avatar
Quote:
Originally Posted by flygilmore View Post
Wow... a bit pricey it seems. I sure do like the looks of this little jet!!

You can buy the complete airframe with fan unit and Brushless motor for $179.00
at Tower.


http://www3.towerhobbies.com/cgi-bin...&I=LXCFVZ&P=ML
Old Aug 17, 2012, 02:10 PM
tulz43 is offline
Find More Posts by tulz43
Registered User
tulz43's Avatar
Quote:
Originally Posted by Robert Belluomini View Post
You can buy the complete airframe with fan unit and Brushless motor for $179.00
at Tower.


http://www3.towerhobbies.com/cgi-bin...&I=LXCFVZ&P=ML
Plus $20 off and free shipping right now. Hard to beat that.
Old Aug 17, 2012, 02:16 PM
STANG KILLA SS is offline
Find More Posts by STANG KILLA SS
Registered User
STANG KILLA SS's Avatar
i noticed they give the top speed of this one 10mph slower than there evader with the same power setup. i wonder why?
thicker & larger wing? if you watch the two vids back to back its also imidiatly visiable.
Old Aug 17, 2012, 11:30 PM
imyohero is offline
Find More Posts by imyohero
F-OFF
imyohero's Avatar
Just picked up a phazer at my lhs, It sure is sweet, glass is perfect and the wing covering is really well done.

Pics to come!
Old Aug 18, 2012, 04:24 AM View Post
colin269
A moderator felt this post violated the following rule: Cross-posting. Show it to me anyway.
Old Aug 18, 2012, 10:38 AM
imyohero is offline
Find More Posts by imyohero
F-OFF
imyohero's Avatar
Quote:
Originally Posted by STANG KILLA SS View Post
i noticed they give the top speed of this one 10mph slower than there evader with the same power setup. i wonder why?
thicker & larger wing? if you watch the two vids back to back its also imidiatly visiable.
The fuse is thicker and being a delta its got a little reflex(2-3mm up) on the elevons. so thats probably whats up with that
Old Aug 21, 2012, 02:17 PM
NeilRivera is offline
Find More Posts by NeilRivera
Registered User
Got my Phazer yeterday at my LHS. It was very well packaged. I already assembled the fan unit and installed it in the fuselage. Took me a couple of hours. It took some sanding to get the motor housing mount to fit properly and perfectly. Guys take your time on this step and make sure to follow the instructions on fitting and mounting the cone adapter. Any mistakes here after the glue sets and it will take a lot of time to correct it. Right now that's all I've done for the day, this jet can be put together fast ! Just for kicks i have a Wemotek unit laying around and measured it and the fuse, I am pretty sure it might fit but its going to take quite some effort to make it happen.... I'll keep posting on my build....
Old Aug 21, 2012, 07:39 PM
super kupfer is offline
Find More Posts by super kupfer
Anything that gives me a High
super kupfer's Avatar
I got my little bird today and it looks siiiiiiiiick

My first impression were BIG as the planes scale is bigger then of the Evader as you can tell by the comparison to the evader, there is at least 10-20% more battery room in the nose, also there are nice touches like the blind nut for the screw that secures the battery tray to the fuse (On the Evader your screwing the battery tray directly to the wood and it wears off after some time), Vertical fin has a spare in it (due to size of vertical fin).

Over all, I like very much
Last edited by super kupfer; Aug 21, 2012 at 08:16 PM.
Old Aug 21, 2012, 07:46 PM
super kupfer is offline
Find More Posts by super kupfer
Anything that gives me a High
super kupfer's Avatar
Here are some pictures of the fuses structure inside (very clean and simple with not much to deal with).

This thing is a winner as far as I see it, Bye Bye Evader.....Hello Phazer

Lots of room for ducting.
Old Aug 21, 2012, 11:20 PM
Double E is offline
Find More Posts by Double E
Registered User
Double E's Avatar
The inside of the airframe looks pretty clean so if you keep things neat during the build you don't really need ducting. Given the larger size, this would be a good candidate to squeeze in a hot 64 or 70mm setup.
Old Aug 21, 2012, 11:33 PM
Double E is offline
Find More Posts by Double E
Registered User
Double E's Avatar
I could almost imagine a Wemo 70 with intake lip mounted directly above the cheater hole and then clean it up with a custom hatch cover.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Great Planes SU-31 E-Performance Series 3D EP ARF platnuim1 Aircraft - Electric - Airplanes (FS/W) 0 Jul 16, 2012 09:31 AM
Sold Great Planes Matt Chapman Eagle 580 GP/EP ARF 53" geebros Aircraft - Electric - Airplanes (FS/W) 1 Jun 25, 2012 10:50 PM
Sold or Trade Great Planes Revolver Sport Aerobatic GP/EP ARF 70" LPU donho1 Aircraft - Fuel - Airplanes (FS/W) 2 Apr 20, 2012 10:38 AM
Sold or Trade Great Planes Revolver Sport Aerobatic GP/EP ARF 70" LPU donho1 Aircraft - Electric - Airplanes (FS/W) 0 Apr 17, 2012 02:54 PM
For Sale RC Plane Great Planes Escapade Sport GP/EP (Plug-N-Play) $175 Diverrcpilot Aircraft - Electric - Airplanes (FS/W) 0 Mar 24, 2012 03:50 PM