Turbo Ace 830-D newbie (77years old) need help - Page 2 - RC Groups
Thread Tools
Jul 22, 2012, 12:29 PM
Registered User
Rapidly-blinking yellow means the Naza is in failsafe mode - it either thinks it does not have a control signal, or it has gotten a signal from the receiver telling it to go into failsafe mode.

Details of solving this will depend on what transmitter and receiver you are using and how your transmitter was set up.

My guess - since it flew before - is that one of the switches on your transmitter is flipped the wrong way, turning on failsafe mode.
Sign up now
to remove ads between posts
Jul 22, 2012, 03:45 PM
manual flying apologist
Adidas4275's Avatar
I would get you LHS to help you bind it. but you are going to need to know what switch they setup for the flight mode and failsafe.

I dont think you have any real issues here, just the fact that you need to bind it.

I am sure your LHS can help you bind a Rx
Jul 23, 2012, 07:48 PM
Registered User

Problem solved: X830-D bind problem

The NAZA GPS user guide said to turn the TX on then the Quad. Today I decided
to do the opposite and turn the Quad on then TX. It worked was able to bind and
spin the props. Thanks to all that contributed to my problem.
Last edited by crdodd; Jul 23, 2012 at 07:51 PM. Reason: spelling edits

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion newbie needs help with easy star 2 build mlggeek Beginner Training Area (Aircraft-Electric) 7 Jul 16, 2012 06:53 AM
Discussion Newbie needs help shootincyclone Electric Power Cars 4 Jul 13, 2012 11:13 PM
Discussion newbie needs help with plane selection mlggeek Beginner Training Area (Aircraft-Electric) 29 Jul 11, 2012 11:40 AM
Discussion Newbie Needs Help with RC Sailboat Decision UncleGuy Sailboats 16 Jul 08, 2012 10:46 AM
Discussion Turbo Ace X-830s Warlock54 Multirotor Drone Talk 4 Apr 27, 2012 11:31 AM