DiaLFonZo-Copter - DJI SpyderQuad Upgrade - Page 14 - RC Groups
Thread Tools
Sep 08, 2012, 07:29 PM
Team Armattan
Quote:
Originally Posted by Dialfonzo
Esc placing..?

The ESC I use are about 38mm long and about 8mm thick at the thickest point.
Would be nice to tuck them in between the top and bottom of the arm.
Sign up now
to remove ads between posts
Sep 09, 2012, 12:58 AM
Team Armattan
Someone ask if the props showed on a Dialfonzo frame modified for DJI 450 arms. Here is a short video showing they do not on mine using a GoPro camera and 9x4.7 props
Sorry I spelled Dialfonzo wrong in the video, sorry Eric.

Test props in view video (1 min 18 sec)
Sep 09, 2012, 01:25 AM
kad
kad
Quad Crasher
kad's Avatar
Sorry if this has been asked already and I missed it, but have you considered doing this as a hexa spider? Possibly using the shorter 330 arms for the front arms?

-K
Sep 09, 2012, 01:32 AM
kad
kad
Quad Crasher
kad's Avatar
Quote:
Originally Posted by jsflyrv
Someone ask if the props showed on a Dialfonzo frame modified for DJI 450 arms. Here is a short video showing they do not on mine using a GoPro camera and 9x4.7 props
Nice! Very stable. What's the FC in use?

Also, why do you say "Modified for the DJI 450 arms"? I was under the impression this frame was made to use those arms?

-K
Sep 09, 2012, 01:36 AM
Team Armattan
You are correct the frame is made for DJI arms poor choice of words. I use a Quadrino FC version 1E

Quote:
Originally Posted by kad
Nice! Very stable. What's the FC in use?

Also, why do you say "Modified for the DJI 450 arms"? I was under the impression this frame was made to use those arms?

-K
Sep 09, 2012, 02:28 AM
Registered User
Dji spyder upgrade gopro test (0 min 14 sec)


KFM
Sep 09, 2012, 03:35 AM
Registered User
Hi guys,

I saw on previous posts that you changed the DJI arms by some other ones.

I am so bad with autocad, or any mechanical design tools, it is just an idea, tell me if it is crappy.

Why not just a delrin (or any other good material I don't know) adapter that would fit the DJI holes on any DJI, Dialfonzo, TBS Discovery frame and then will allow us to use square aluminium tubes or carbon ones for the arms?

This just to save weight.

Cheers.
Sep 09, 2012, 09:18 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by pietronet
Hi guys,

I saw on previous posts that you changed the DJI arms by some other ones.

I am so bad with autocad, or any mechanical design tools, it is just an idea, tell me if it is crappy.

Why not just a delrin (or any other good material I don't know) adapter that would fit the DJI holes on any DJI, Dialfonzo, TBS Discovery frame and then will allow us to use square aluminium tubes or carbon ones for the arms?

This just to save weight.

Cheers.
It can be done.
The biggest problem is the fact that the bottom and top holes are not in line.
Making the needed part a bit odd..
Sep 09, 2012, 09:23 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
For the prop in the field of view.
I have try 3 different resolution on the gopro and they don't give you the same result.
In 1080p on mine i don't see the prop but in 720p yes.
Sep 09, 2012, 09:24 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Size of your ESC in the arm..
I move the reinforcement a bit forward to give it more space.

What are you thinking for standoff.. 0.5" - 0.75" - 1"...?
Sep 09, 2012, 10:00 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Tube like that...?
Sep 09, 2012, 10:10 AM
Registered User
Quote:
Originally Posted by Dialfonzo
It can be done.
The biggest problem is the fact that the bottom and top holes are not in line.
Making the needed part a bit odd..
Ok I understand but if it is possible it would be awesome!!!
Sep 09, 2012, 10:14 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by pietronet
Ok I understand but if it is possible it would be awesome!!!
Look one post above..
Sep 09, 2012, 10:35 AM
Registered User
ooops missed it!
Sep 09, 2012, 10:54 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
With caged motor mount...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DiaLFonZo-Copter Crazy2Fly Quadcopter 340mm Dialfonzo Multirotor Drone Talk 87 Feb 07, 2016 07:41 AM
New Product DiaLFonZo-Copter Boom Block Dialfonzo Multirotor Drone Talk 88 Mar 21, 2014 06:34 AM
Build Log Unrealistic's HEXorcism 600 - Luis & DiaLFonZo-Copter unrealistic Multirotor Drone Talk 47 Oct 23, 2012 05:09 AM
New Product DiaLFonZo-Copter - MicroTrinity Quad Dialfonzo Multirotor Drone Talk 6 Jul 09, 2012 09:26 PM