Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 25, 2012, 06:32 AM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by JC Spohr
Nice job!

JC
Quote:
Originally Posted by toolman18
Shawn,
Very good job on the build pics, Everything is very clear and understandable. Great Job!!!! I wasnt going to say anything but maybe you should shave your arms.
Quote:
Originally Posted by cdee
what JC said +1... looks really nice Gravity!!
.
cdee
.


Thanks guys. If it flys any where near as good as it is building. We should have a winner here.

It's funny...i would get on a build roll and forget tot take pics and then have to go back and shoot photos. LOL

For those that may be starting the build and are not aware. My build photos are here: https://www.rcgroups.com/forums/show....php?t=1694231

Hope they are helpful
Sign up now
to remove ads between posts
Jul 25, 2012, 09:33 AM
Fly Low!!!! No Sked.
AirHermit's Avatar
Looking great!
So far looks like i followd instructions pretty good. Thanks for posting pictures.
I'm keeping a close eye on the tail and pull pull assembly. I want to make sure i do mines correctly.
Jul 25, 2012, 10:51 AM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by AirHermit
Looking great!
So far looks like i followd instructions pretty good. Thanks for posting pictures.
I'm keeping a close eye on the tail and pull pull assembly. I want to make sure i do mines correctly.
I'm hoping to get to that later today. If time allows. Very happy so far with how it's going together.

There are a few areas where the instructions are not very clear or they have not been updated since enhancements have been made. I have contacted Brad at TH and RC Factory and they are working on updating the instructions.
The discrepancies are nothing major, just a little confusing. I am trying to address these areas of the build and make notes as I go. If you follow both the kit diagram and the build thread photos and narrative’s, you should do just fine. If you still have any questions, feel free to PM me. And I’ll be more than happy to help.

Shawn
Jul 25, 2012, 03:17 PM
Registered User
toolman18's Avatar
Quote:
Originally Posted by Gravitycheat
I just shaved them this morning
Now thats funny right there!
Jul 25, 2012, 03:22 PM
3D Hack
JC Spohr's Avatar

My Build Progress


Thus far, this thing has built incredibly straight and accurate.

I am using Ron_Dog's "Coke Method" to build this plane but so far the Coke cans have mostly been used for weight.

I checked the "dry" alignment to the fuse before I glued the horizontal stab last night. It was exactly correct due to the keying built into the pieces. I wasn't expecting that. Typically, you can have some variation but this one is dead on because of RCF's production methods.

I glued it up and rechecked the alignment measurements - dead on.

JC
Jul 25, 2012, 03:25 PM
Addicted
Quote:
Originally Posted by AirHermit
I'm keeping a close eye on the tail and pull pull assembly. I want to make sure i do mines correctly.
What is so difficult about it? I don't have one but the directions look pretty simple.
Jul 25, 2012, 03:48 PM
3D Hack
JC Spohr's Avatar
Quote:
Originally Posted by Sixinarow
What is so difficult about it? I don't have one but the directions look pretty simple.
It's not difficult, just unfamiliar to most.

Proper tension is the thing that scares most people.

I have a method for making the strings easily re-adjustable as does Hercdriver7777.

I'll share mine here as my build progresses and I suspect Shawn will address this as well.

JC
Jul 25, 2012, 04:06 PM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by JC Spohr
It's not difficult, just unfamiliar to most.

Proper tension is the thing that scares most people.

I have a method for making the strings easily re-adjustable as does Hercdriver7777.

I'll share mine here as my build progresses and I suspect Shawn will address this as well.

JC
I'll be using herc's method for the Pull Pull cable adjustments. Very clever method

Also i have an important build note. Make sure to install the motor mount prior to installing the top fuse section. It is one of the enhancements they did but apparently they did not change the instructions ( unless I missed it) I also believe that using tooth picks or using anchoring tabs as they mentioned is no longer necessary as I did not receive any in my kit.
I used plenty of Welders to adhere the mount to the surrounding EPP.
Last edited by Gravitycheat; Jul 25, 2012 at 05:27 PM.
Jul 25, 2012, 06:23 PM
Fly Low!!!! No Sked.
AirHermit's Avatar
Quote:
Originally Posted by sixinarow
...i don't have one.....


Anyways, im glad im waiting to see how the pull pull part is done.
Seems to be a tecnique or two out there.
And x1 on the motor mount, make sure its
Intalled just befor the top fuse.
Jul 25, 2012, 06:49 PM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by AirHermit


Anyways, im glad im waiting to see how the pull pull part is done.
Seems to be a tecnique or two out there.
And x1 on the motor mount, make sure its
Intalled just befor the top fuse.
Just posted my pull pull. Amazingly simple adjustment device.
Jul 25, 2012, 07:10 PM
3D Hack
JC Spohr's Avatar

Use this Diagram Sheet for your build. It shows the updates.


The build instruction sheet appears to be for version 1.0 of this plane. The Czech version "Datasheet" diagram appears to be updated (although page 1 is in Czech) .

My understanding is that a new English version is in the works and should be available very soon.

http://www.rc-factory.cz/ke-stazeni/dokument-529-3.pdf

NOTE - the CG is 110mm now instead of 125mm

Okay - time for supper and then back to my build.

JC
Jul 25, 2012, 07:38 PM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by JC Spohr
The build instruction sheet appears to be for version 1.0 of this plane. The Czech version "Datasheet" diagram appears to be updated (although page 1 is in Czech) .

My understanding is that a new English version is in the works and should be available very soon.

http://www.rc-factory.cz/ke-stazeni/dokument-529-3.pdf

NOTE - the CG is 110mm now instead of 125mm

Okay - time for supper and then back to my build.

JC
Thanks for posting this. This is the updated diagram. In fact the link to the old one has been removed by RCF. I will insert a link to this diagram in the first thread post. RCF is indeed working on new updated instructions to go along with it.

In the mean time though. If anyone has any questions on the build don't Hesitate to ask. Lots of helpful people here that are willing to help.
Jul 25, 2012, 09:13 PM
Registered User
kenelder's Avatar
nice gator.
Jul 26, 2012, 01:08 AM
Fly Low!!!! No Sked.
AirHermit's Avatar
https://www.rcgroups.com/forums/atta...mentid=5036502

Seems oh so simple but I would have never thought of this little device.
And its adjustable! Sweet! So glad i waited.

Thanks Gravity'.
Jul 26, 2012, 05:41 AM
Don't give in to gravity
Gravitycheat's Avatar
Quote:
Originally Posted by AirHermit
https://www.rcgroups.com/forums/atta...mentid=5036502

Seems oh so simple but I would have never thought of this little device.
And its adjustable! Sweet! So glad i waited.

Thanks Gravity'.
I would love to take credit for the device but.... the credit goes to Hercdriver7777 (chris) who has done many of these build threads. Thanks Chris!
Sorry for the terrible picture. I'll post a new one today.
Quote:
Originally Posted by kenelder
nice gator.
If you like Welders eating gators!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Twisted Hobbys - RC Factory USA Sbach 342 39" Build Thread & Flight Video!!!!! aerofundan 3D Foamies 497 May 24, 2015 08:01 AM
Discussion Twisted Hobbys - RC Factory USA YAK-55 39" Build Thread/Videos & Flight Video!!!!! cbriggs11 3D Foamies 78 May 28, 2014 05:40 PM
Discussion NEW Twisted Hobbys/ParkAero RC Factory 31" Sbach 342 Greengiant 3D Foamies 130 Jan 24, 2013 01:49 PM
Discussion NEW RC Factory-Park Aero/Twisted Hobbys 31" Sbach 342 Greengiant 3D Flying 0 Nov 04, 2011 11:34 AM
Discussion RC Factory USA - Twisted Hobbys - 1.2m SU 29 Build Thread. hercdriver7777 3D Foamies 97 Oct 19, 2011 06:34 AM