Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Nov 20, 2012, 07:19 AM
BobBoxKite is offline
Find More Posts by BobBoxKite
Registered User
Barn,

I will but I will do it on a new thread I don't want to hijack you're. Thanks for the you're thought, it nothing to serious.

Bob
Sign up now
to remove ads between posts
Old Nov 20, 2012, 10:27 AM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Bob,

When you get the thread going post a link here.

Mounted the laser on a piece of perf board with velcro on the bottom. It plugs into the socket I built into each wing tip. The lasers are on a RC switch on the connection board.
Old Dec 05, 2012, 07:59 PM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
To get the RX controlled switches to be a neater connection to the RX I had to remove them from the board and rotate them 180 degress, so the servo wire would be closer to the RX. I decided on using one cell power from the balance tap to power the laser circuit. With both lasers on and pointing at the white wall in my shop it was hard to get a good picture. I guess the reflected light messed with the camera.
Old Dec 05, 2012, 09:11 PM
prototype3a is offline
Find More Posts by prototype3a
Which one is aileron again?
Those lasers look really bright! Maybe I should buy a module and build my own hand held pointer...
Old Dec 16, 2012, 05:48 PM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Landing light.
Old Dec 16, 2012, 07:16 PM
karl k is offline
Find More Posts by karl k
Yes, "that" Karl...
karl k's Avatar
That should work! Lol
Old Mar 05, 2013, 02:10 PM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Is winter over with yet???
Old Mar 06, 2013, 10:09 PM
Billyboy31 is online now
Find More Posts by Billyboy31
Registered User

wowwwwwwwwwwwwwwww


I thought I was something special with sky surfer with soild lights. Well I am going to try to learn a little more. thanks so much for all your time and effort. just take pictures and all the post each and every step of the way. Can I buy a kadet and send it down to you. Just kidding thank you so much. Doing my first build from a kit with a fellow club member he is holding my hand. you sure have shown what a lot a loive night can do. By the way. I took your whole post and put it on my favorite, because I going to do a kadet on my own next. again thankyou
Old Mar 07, 2013, 08:26 AM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Thanks for all the kind words. It is a lot of extra work to document a build and I am glad you appreciated it and I hope it helps your build.

Good luck and don't hesitate to PM me with any ?????
Old Mar 22, 2013, 04:30 PM
bobzilla is online now
Find More Posts by bobzilla
EVFlyersBoss
bobzilla's Avatar
Quote:
Originally Posted by Barn-E-Stormer View Post
Got in another flight to test the Kadet. Not really worthy of a video but what the heck. It flies like a Kadet.

http://www.youtube.com/watch?v=GFw1Mf5clYQ
that's some impressive building skillz you have!!
Old Mar 22, 2013, 05:34 PM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Thanks Bobzilla!
Old Jun 17, 2013, 07:37 AM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
The weather has finally cleared out and we got in a good evening of night flying. The Kadet really flies nice. I want to add a cowl over the engine and light it up to complete the job. I noticed after I put the wing on one set of lights in the tail/rudder was not on. The cable was not plugged in good.

Kadet Night Test2 PC (2 min 53 sec)
Old Jun 18, 2013, 10:38 PM
plcline67 is offline
Find More Posts by plcline67
Registered User
plcline67's Avatar
Good job, Barney. Can't wait to see at Summersville!
Old Jun 24, 2013, 07:28 AM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
After the first test flights I thought the front end looked a little dark. I stacked up some foam, glued it together and carved out a cowl mold. Then covered the mold with Saran Wrap and glassed it. Made a quick cowl, but I want to try one of the ARF cowls and see if it will fit. I also added more lights to the cabin window area.
Old Jun 24, 2013, 07:29 AM
Barn-E-Stormer is online now
Find More Posts by Barn-E-Stormer
Dark Yet??
Barn-E-Stormer's Avatar
Thanks to david.merc for capturing this night flying video at Ancient River Eagles 2013 cookout.


Night Flying RC Plane with Internal LED Lights and Green Laser Lights (6 min 24 sec)
Last edited by Barn-E-Stormer; Jun 24, 2013 at 07:31 AM. Reason: .


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Sig Kadet Senior - ARF. Good For A Newbie? itsme2 Electric Plane Talk 23 Feb 15, 2013 04:13 PM
For Sale Kadet senior unfinished kit lpu price drop steeg Aircraft - Fuel - Airplanes (FS/W) 1 Jul 16, 2012 07:46 AM
For Sale sig kadet senior kit(started) lpu steeg Aircraft - Fuel - Airplanes (FS/W) 1 Jul 08, 2012 12:28 AM
Wanted Wanted to buy Sig Kadet Senior Kit shadowridertcw Aircraft - General - Miscellaneous (FS/W) 1 Jun 13, 2012 06:13 PM