Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 14, 2012, 05:40 PM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
New Product

KK 2.0 Delrin Protection Case


Hey all,

I had many requests for a case for the new KK2.0 board. It has finally arrived.
I designed this case and mill them myself.

Specs are listed below!

KK 2.0 Delrin Protection Case
CNC Machined Delrin Case for the KK 2.0 Multirotor Boards. Provides protection from damage in the event of a crash.

This protection case is designed for the KK 2.0 Multi-rotor controllers, and provides an easy mounting solution on any multirotor. The control board is secured to the bottom of the case with double sided foam tape (not provided), and the top half is attached with the (4) 3mm screws. There are no screws protruding from the bottom of the case, so it may be flush mounted to any airframe. All pins are accessible, and programming buttons can be pushed with a ball point pen or other instrument.

There is also an arrow to designate the correct direction for mounting your board.

Case weight with screws: 22g
Case and board weight: 38g
Approximate Dimensions: 2.5" x 2.5"

http://stores.intuitwebsites.com/CMo...ion/Detail.bok
Sign up now
to remove ads between posts
Old Jul 14, 2012, 05:53 PM
tonkajeep34 is offline
Find More Posts by tonkajeep34
NTX Helidillos
tonkajeep34's Avatar
Looks nice Chris
Old Jul 14, 2012, 06:10 PM
acuralegendz is offline
Find More Posts by acuralegendz
What goes up...
acuralegendz's Avatar
They look great. Would it be possible for some risers so you could use the buttons without pushing something in the hole?
Old Jul 14, 2012, 06:13 PM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
I thought about that... but it would just be extra money to find them and incorporate them... I might save that for version 2 depending on how much interest I get in these.

Chris
Old Jul 15, 2012, 09:43 AM
mallettron is offline
Find More Posts by mallettron
Ronnie - Sheffield UK (G0NJD)
mallettron's Avatar
Oh no something else I must have..................
Old Jul 15, 2012, 06:04 PM
gitit20 is offline
Find More Posts by gitit20
Registered User
gitit20's Avatar
Oh I like that because you know just one little bump and BAMMMMMM the lcd is cracked :P nice nice nice...

I plan on putting some small holes in the bottom so I can bolt it to my frame the way mine is set up the double sided tape wont work but its just a simple matter of drilling 4 holes then mounting it i really do like this a lot...

Quote:
Originally Posted by Chris Moon View Post
Hey all,

I had many requests for a case for the new KK2.0 board. It has finally arrived.
I designed this case and mill them myself.

Specs are listed below!

KK 2.0 Delrin Protection Case
CNC Machined Delrin Case for the KK 2.0 Multirotor Boards. Provides protection from damage in the event of a crash.

This protection case is designed for the KK 2.0 Multi-rotor controllers, and provides an easy mounting solution on any multirotor. The control board is secured to the bottom of the case with double sided foam tape (not provided), and the top half is attached with the (4) 3mm screws. There are no screws protruding from the bottom of the case, so it may be flush mounted to any airframe. All pins are accessible, and programming buttons can be pushed with a ball point pen or other instrument.

There is also an arrow to designate the correct direction for mounting your board.

Case weight with screws: 22g
Case and board weight: 38g
Approximate Dimensions: 2.5" x 2.5"

http://stores.intuitwebsites.com/CMo...ion/Detail.bok
Old Jul 15, 2012, 06:18 PM
WiseDuck is offline
Find More Posts by WiseDuck
Mmmmmmm!
WiseDuck's Avatar
Nicely done! I'll place an order later this week.
Old Jul 15, 2012, 06:22 PM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
Thanks all.

I thought about having the holes in the case match the hole pattern on the board, but the hole pattern make not be exacly the same on every board. I also dont like the idea of a frame flexing in a crash and sacrificing my board. I chose to make the holes external.

Thanks for all the compliments everyone :-)
Old Jul 16, 2012, 04:29 AM
gitit20 is offline
Find More Posts by gitit20
Registered User
gitit20's Avatar
I use the plastic standoffs they pop off rather easy with out damaging the board but i was talking about just holes in the bottom part of the case so that i can mount it to the frame


Quote:
Originally Posted by Chris Moon View Post
Thanks all.

I thought about having the holes in the case match the hole pattern on the board, but the hole pattern make not be exacly the same on every board. I also dont like the idea of a frame flexing in a crash and sacrificing my board. I chose to make the holes external.

Thanks for all the compliments everyone :-)
Old Jul 16, 2012, 06:11 PM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
That works too :-)
Old Jul 17, 2012, 07:02 PM
Bertg is offline
Find More Posts by Bertg
Registered User
Hi Chris,

I got my KK 2.0 protection cases and the rest of my order today! I already have one of the cases installed and everything fits perfect! What a great product!

Thanks for the quick turn around

Bert
Old Jul 17, 2012, 07:13 PM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
Thats awesome Bert! I appreciate the compliments. I really took some time with the new cases tryng to make everything perfect.

Thanks again!

Chris
Old Jul 17, 2012, 11:15 PM
healthyfatboy is offline
Find More Posts by healthyfatboy
Registered User
How much added height is there with this? I'm interested although running out of room on my Pro Tricopter Delrin Kit.
Old Jul 18, 2012, 12:20 AM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
The overall height ends up being 1/2" I used 2 pieces of .25" delrin.
Old Jul 20, 2012, 09:29 AM
Chris Moon is offline
Find More Posts by Chris Moon
Registered User
Anyone else receive their case yet?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Hobbyking i86 Delrin Case Chris Moon Multirotor Talk 16 Jul 30, 2012 09:00 AM
Sold SOLD - HoverFly Sport board, Maxbotix LV-EZ0 sonar, MadLabs protective case ross_badger Aircraft - Electric - Multirotor (FS/W) 1 Jun 27, 2012 06:36 AM
Sold NAZA w/ Protective delrin casing The RevKev Aircraft - Electric - Multirotor (FS/W) 4 May 07, 2012 06:26 PM
Discussion Hoverfly Pro Green Board Protective Case Greasetattoo Hoverfly Technologies 6 Apr 05, 2012 06:43 PM
For Sale PSP + 2 gb card + game + case + screen protecter hamcigar Non R/C Items (FS/W) 0 Apr 16, 2006 11:30 PM