Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 16, 2012, 06:48 AM
EB-66C Team Member
J Morgan's Avatar
Thanks deuce!

Dave,
I talked to my buddy who is a electronics guru last night. Believe we have the flashing problem worked out. I'll try it today and post what I did. Looks to be a simple fix.
I get these worked out and she might make a really good night flier at SEFF next year.

J
Sign up now
to remove ads between posts
Nov 16, 2012, 09:30 AM
EB-66C Team Member
J Morgan's Avatar
OK, lights are fixed. My buddy told me to remove the flashing light connectors from the control box and test that all the rest still worked. Luckily I had bought two of these sets so I could use the second set to test. I removed the WF lights and all still worked. With that good I continued following his instructions. I had the two flashing lights going down the port boom so I fished the red wingtip light wires out of the wing in the nacelle opening. I cut the wires to the WF lights shorter and soldered both positive wires from them into the positive wire from the red wingtip light. Same with the negative lead.
Hooked it all up again and tested. Everything is fine now and the WF lights burn solid. Now I have to make lens for several of them.
Of course it wasn't w/o some drama. I wound up pulling the port red wingtip light into the wing about 1" and have to fish it back out or just remove and re-run it. But that's a simple thing.
Pics show the lights working and then I turned the shop lights off for a couple of pics. Did someone say night flier??? Cool!

J
Nov 16, 2012, 11:38 AM
AMA 884978/KK6NKY
hillbille's Avatar
Squeeze that shutter - don't jerk it! Like basic training all over again!!

LOL!!

Hillbille
Nov 16, 2012, 04:02 PM
Registered User
and here I always thought one should caress it...
maybe John had it out on a night mission and they were taking incoming...
jt
Nov 16, 2012, 08:18 PM
EB-66C Team Member
J Morgan's Avatar
I know Bill. Im a lot better pulling a trigger than pushing a shutter button.

jt,
I thought the same thing. Sort reminds me of the time lapse pic of the Stinger firing from its orbit.

J
Nov 17, 2012, 04:08 AM
Registered User
Low Show's Avatar
Hey J, I may be late to party but have you thought about laser pointers angled down for night OPs. and then do a time lapse photo. Well it might work.....Don
Nov 17, 2012, 05:25 AM
EB-66C Team Member
J Morgan's Avatar
Hey Don,
Cool idea but frankly there is NO way that I'm letting this puppy out to play at night. I'll bet your idea would work though.
Any movement on your Spad?

J
Nov 17, 2012, 08:39 AM
EB-66C Team Member
J Morgan's Avatar
Just finished hooking up the micro switch on the landing lights. I actually did it yesterday but had them reversed so I had to turn the switch around. Now it works: gear down= Landing lights on, gear up= Landing lights off.
Only bad thing is there is a mess of wiring in the fuse. I'm sure it could have been done neater but ...........
So the lights are done and moving on the the lenses.

J
Nov 17, 2012, 02:06 PM
Registered User
acesimmer's Avatar
I have mine connected to a receiver controlled switch which is about a half inch square. I then mix the light channel to my gear. I also have it so another switch will over ride and turn them on weather gear up or down. For my models without retracts I mix it to the flap channel.
Nov 17, 2012, 04:02 PM
EB-66C Team Member
J Morgan's Avatar
Lots of ways to skin a cat huh Ace. I went the old school down and dirty. Not the prettiest of setups but it works well.

Working on more details. The Jantrol heaters had their stacks on top. My tech advisor sent me pics and mentioned this:

"John, I wondered why I was seeing 9 exhaust "stacks" (5 forward short ones and 4 taller ones behind those) on the Fuselage ??? Of the 5 lower, forward exhaust stacks, I think the center one is the APP exhaust and of course the other four are for the heaters."

I used the old plunge method to make the scoops and a silicone mold for the four stacks. I'm just finishing casting the final stack. Need to use up my silicone, it's getting some age and thickening up making it really hard to get the air bubbles out of it.

Starting to run out of details, paint won't be too far down the road.

J
Nov 17, 2012, 08:08 PM
Registered User
the devils in the details eh John?? Your expert know the fire control specs on the 119? Wonder if they were even close to what the AC130 does. They say the 130 can place a round in every sq ft on a football field.. dont sound like a great place to be hiding eh?
jt
Nov 17, 2012, 08:30 PM
EB-66C Team Member
J Morgan's Avatar
Love the details jt.
He wasn't on the gunships. FE on the regular 119s. He knows them inside out, I can attest to that. And yes, I would hate to be anywhere in the vicinity of where these guys were firing.

J
Nov 17, 2012, 09:05 PM
Registered User
Low Show's Avatar
Quote:
Originally Posted by J Morgan
Hey Don,
Cool idea but frankly there is NO way that I'm letting this puppy out to play at night. I'll bet your idea would work though.
Any movement on your Spad?

J
Uh yeah, I moved it back to Wilmington, missed the Flying Buds and the lease was up in Raleigh so me and the Bride of 30 years said let's go home, she has all of her "Peeps" here in Wilmington and she has really embraced this whole airplane thing, I think it started when we went to the FAC Museum in Ft. Worth. She is now calling the F-105 is her all time favorite, it must be the girlish Coke Bottle fuse, she was in awe standing in the Bomb Bay and looking at all of the wires and tubes.When we got home I pulled up the pics of yours and it was love at first site, I'll be back on the A1 next month, thanks for asking and keep doing it it's a way to keeping a boot in the pants. Take care, Don
Last edited by Low Show; Nov 17, 2012 at 09:18 PM.
Nov 18, 2012, 05:45 AM
EB-66C Team Member
J Morgan's Avatar
Can't wait for you to start working on it Don. I'll be watching. I was really pleased at how well mine flew right off the board. And it's only 1/8th scale, yours will be awesome.
If you get it done and bring it to SEFF, it may inspire me to build a bigger one, I love A-1s!!!
My 105 is hanging over me watching the 119 take shape.

J
Nov 18, 2012, 11:31 AM
EB-66C Team Member
J Morgan's Avatar
Finished up the exhausts stacks. Also masked off the landing light lens and added the shield that kept the light from hurting night vision.
The wings are basically ready for paint now after a little sanding and cleaning.
Also fixed Woody's on the leading edge.

J


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video AC-130U, (K. Sparks-based) wewprez Electric Plane Talk 3 May 21, 2012 10:10 AM
Questions and thoughts about Palmer Plans C-130 Lucas in Alaska Scale Kit/Scratch Built 35 Oct 30, 2008 05:00 PM
T-38 Based on CMYK Plans Ralph A. D'Amelio Electric Ducted Fan Jet Talk 30 Nov 24, 2004 11:27 AM
Enlarging Plans Based on Engine Size (A7 Corsair II propped) sethorus The Builders Workshop 8 Oct 22, 2003 10:53 PM
Palmer Plans KAMarks Scale Kit/Scratch Built 4 Nov 08, 2001 08:42 AM