SUPER EASY great flying foamy - Page 27 - RC Groups
Thread Tools
Oct 21, 2012, 03:54 AM
*GRAVITY* I hate it :(
Sparken57's Avatar
Quote:
Originally Posted by balsa or carbon
15" x 20" , every dimension 1/2 of the original .
Where did the CG end up on the 1/2 SE? TU Ken
Sign up now
to remove ads between posts
Oct 21, 2012, 02:20 PM
IMO ( In My Opinion ) →
balsa or carbon's Avatar
Quote:
Originally Posted by Sparken57
Where did the CG end up on the 1/2 SE? TU Ken
7"- 8" back from the nose .
Oct 21, 2012, 04:22 PM
*GRAVITY* I hate it :(
Sparken57's Avatar
Quote:
Originally Posted by balsa or carbon
7"- 8" back from the nose .
OK thanks
Nov 09, 2012, 02:26 PM
IMO ( In My Opinion ) →
balsa or carbon's Avatar

Video of 1/2 SE indoors


Here is a video of the 1/2 size SUPER EASY flying indoors . It was a little fast for the small indoor space .


RC paper airplane indoor flight (1 min 33 sec)
Nov 09, 2012, 02:35 PM
*GRAVITY* I hate it :(
Sparken57's Avatar
Quote:
Originally Posted by balsa or carbon
Here is a video of the 1/2 size SUPER EASY flying indoors . It was a little fast for the small indoor space .


http://www.youtube.com/watch?v=HC5ZS...hannel&list=UL
Cool nice flying
Nov 16, 2012, 04:35 PM
IMO ( In My Opinion ) →
balsa or carbon's Avatar

Outdoor flying 1/2 SE


Flying the 1/2 SE outside . Pretty nimble flyer , even does some nice rolls for RET !


1/2 size SUPER EASY RC paper airplane (1 min 48 sec)
Nov 21, 2012, 02:28 AM
Registered User
slim1357's Avatar
I made a micro today, 1/2 scale like yours but I didn't calculate the KFm step correctly. I'm going to fix it tomorrow and add a servo or make a better link to the elevators.

Video and pics.
Micro super ez (0 min 31 sec)
Nov 21, 2012, 04:11 AM
IMO ( In My Opinion ) →
balsa or carbon's Avatar
Quote:
Originally Posted by slim1357
I made a micro today, 1/2 scale like yours but I didn't calculate the KFm step correctly. I'm going to fix it tomorrow and add a servo or make a better link to the elevators.

Video and pics.
http://youtu.be/wrF_DR0T3Xo
Nice ! What electronics are you using ?
Nov 21, 2012, 12:43 PM
Registered User
slim1357's Avatar
Quote:
Originally Posted by balsa or carbon
Nice ! What electronics are you using ?
HK 1811 2000kv motor, Hobbywing 12a esc, Orange 6 ch RX, Solar 5g servos. I made the y link too short and since I have another 5g servo handy, I'm going to try elevons and a rudder.
Nov 21, 2012, 01:24 PM
IMO ( In My Opinion ) →
balsa or carbon's Avatar
Quote:
Originally Posted by slim1357
HK 1811 2000kv motor, Hobbywing 12a esc, Orange 6 ch RX, Solar 5g servos. I made the y link too short and since I have another 5g servo handy, I'm going to try elevons and a rudder.
Elevons should make for a crazy roll rate ! Looking forward to seeing that !
Nov 21, 2012, 08:57 PM
Registered User
slim1357's Avatar
Quote:
Originally Posted by balsa or carbon
Elevons should make for a crazy roll rate ! Looking forward to seeing that !
Me too, hopefully tomorrow morning.
Nov 22, 2012, 12:19 PM
Registered User
justeyfly's Avatar
is this they same plane
Nov 22, 2012, 12:21 PM
Registered User
justeyfly's Avatar
check out this EDF delta wing
home made EDF delta wing (2 min 34 sec)
Nov 22, 2012, 02:36 PM
IMO ( In My Opinion ) →
balsa or carbon's Avatar
Quote:
Originally Posted by justeyfly
check out this EDF delta wing https://www.youtube.com/watch?v=pe-FEBhi0DY
Looks GREAT ! Are you building any more planes ?
Last edited by balsa or carbon; Nov 22, 2012 at 02:44 PM.
Nov 30, 2012, 10:19 PM
Registered User
I am a Rookie. I find I am really enjoying building foamy planes and my brother just gave me a beginners plane. My problem I am afraid flying and crashing a $125 plane. This plane I can fly and practice and then move up to more expensive beginners planes. Thank you for the plan and the details.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion AWESOME landing gear for DJI F550, easy build and totally sturdy, all parts fit great jasper7821 Multirotor Drone Talk 15 Apr 23, 2012 02:52 PM
Discussion Homemade "rectangular" flying wing, flies great,lightweight,easy to build.watch video avlisogeid Flying Wings 25 Nov 05, 2010 08:46 AM
The SoarStar Foamy from Super Flying Models mrm1 Foamies (Kits) 81 Feb 10, 2010 05:22 PM
Rave Great morning of flying with the Easy Star HillRf Electric Plane Talk 11 Jul 16, 2008 07:03 AM
Discussion 3-4 ch easy flying Foamy suitable for light winds blxpy Foamies (Scratchbuilt) 2 Jun 07, 2008 08:05 AM