question about how to figure out amperage on a given setup. - RC Groups
Thread Tools
Jul 05, 2012, 10:36 PM
Closed Account
Question

question about how to figure out amperage on a given setup.


i just need to know if i got this right.

to figure out your amperage on a given setup i must divide watts by voltage yes? im looking for a suitable esc.

2x 3300mah 30c 5s (10s)
tacon 160 with an 18x8 or18x10 apc (specs say 245kv 2700w)
"will an 80a HV esc work?"


i swear i once knew how to calculate all this on my first build. if anyone could figure out whether im okay with an 80a HV esc or i should get a 100a HV esc. i know i hit a real bump over this question. sorry mateys!
Last edited by out of stock; Jul 05, 2012 at 10:42 PM.
Sign up now
to remove ads between posts
Jul 05, 2012, 10:47 PM
4.2V of pure Kraut power
bzfrank's Avatar
About 53A max. (by Drivecalc based on your voltage, kV and prop data) with 18x8 APC.

A 80A HV ESC should do nicely.

- Frank
Jul 06, 2012, 08:16 AM
Closed Account
Fantastic! Thank you!
Jul 06, 2012, 08:17 AM
An itch?. Scratch build.
eflightray's Avatar
If you scroll down a bit on this Hobby Partz page, - http://www.hobbypartz.com/96m608-big...335-245kv.html

you will see what some users results are.

I find looking at the reviews from actual users on various suppliers websites is always a good way to check a motor out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Question about throttle calibration in HF setup software Stacky Aerial Photography 3 Jul 07, 2012 06:51 PM
Discussion got a question about finding out what a motor(s) needs maxwill Batteries and Chargers 12 Jun 22, 2012 04:51 AM
Discussion I need some help figuring out how to wire something up to my Rx asd9000 Radios 4 May 11, 2012 09:57 PM
Help! Please help! New to Nimh, can't figure out how to connect receiver pack to Elysium ch The knifes edge Batteries and Chargers 4 May 08, 2012 03:45 AM
Help! i just got my fpv stuff and i can't figure out how to: flohio117 FPV Talk 10 Mar 02, 2012 03:15 PM