Thread Tools
Old Jul 05, 2012, 07:13 PM
olllian is offline
Find More Posts by olllian
olllian
olllian's Avatar
Discussion

Help with ESC


Hey guys i have a problem i have one more question i run a sepert castle bec and i unpluged the middle wire on the plug of the speed controller that will go in to the RX cuz that is what powers the reciver if you are not running a bec. But when i do that i cant get my scorpion moter to make that noise that its ok. And when i put back the middle wire in the plug and connect it it will work? Any idea what i am doing wrong?
Sign up now
to remove ads between posts
Old Jul 05, 2012, 07:28 PM
typeRA is online now
Find More Posts by typeRA
Zero Expo
typeRA's Avatar
Does your ESC have a BEC?
Old Jul 05, 2012, 07:58 PM
olllian is offline
Find More Posts by olllian
olllian
olllian's Avatar
its the TURNIGY K-Force 120A-HV OPTO 5-12S Brushless ESC


http://www.hobbyking.com/hobbyking/s...hless_ESC.html
Old Jul 05, 2012, 08:05 PM
olllian is offline
Find More Posts by olllian
olllian
olllian's Avatar
I figured it out u dont need to remove the red wire when its OPTo Thx anyway


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Help with ESC selection and ESC programming Power_user_EX Power Systems 0 May 18, 2012 05:09 AM
Help! Help with DJI ESC OPTO 30a and OPCC markeydoo Multirotor Talk 7 May 16, 2012 10:54 PM
Discussion Sorry for all the? But need help with slow motor/ESC Denominator Multirotor Talk 3 Mar 26, 2012 07:06 PM
Discussion Help with buying a good motor to perform with my esc leo.geo Electric Plane Talk 5 Mar 15, 2012 07:10 AM
Question Help with FMS 50amp ESC from 1400mm Warbird (Spitfire) Merlin Power Electric Warbirds 2 Mar 12, 2012 05:08 PM