Thread Tools
Nov 27, 2012, 08:49 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by boredom.is.me
Would there be any concern with using a multi rotor head with this gyro?
Non at all. It has support for all sorts of multi rotor phasing, as well.
Sign up now
to remove ads between posts
Nov 27, 2012, 09:55 PM
Registered User
mligosh's Avatar
Gyro finally showed up today. Looks complete. Just over 5 weeks to get here. Four emails to Hobby Dream and not one returned. I certainly can't recommend them and I definitely won't be ordering anything else.

Mike
Nov 27, 2012, 10:34 PM
Registered User
Crashed both of my 450's on thanksgiving day, both from loss of oreintation so having a Ikon fbl unit would have saved me( hind site is always 20 20),looking forward to it but might have some questions, I'm putting my Ikon into a Warp 360.
Steve
Last edited by Kauaiguy; Nov 27, 2012 at 10:38 PM. Reason: Had linked to previous post that didn't link?
Nov 27, 2012, 11:56 PM
Registered User
barnstorm100's Avatar
Quote:
Originally Posted by Kauaiguy
I ordered recently from Hobby king 8 days ago and my stuff was at the post office on friday( ordered on Sunday and could have picked up on following sat).They have been pretty fast recently but once in awhile very slow.I bought an Ikon and a 4s Scropion motor from Helidirect during the sale.
Steve
Hi Steve, I was going to get that IKon but when I went to order the sale was off and price was back to $239
Nov 28, 2012, 02:41 AM
Registered User
Dr.M's Avatar
Well, it turns out the self-level on the Brain/Ikon is not 100% reliable and can get your heli into some pretty precarious positions at times. Vibes seem to be the main culprit.
Nov 28, 2012, 07:49 AM
Registered User
ForceFedDSM's Avatar
Quote:
Originally Posted by barnstorm100
Hi Steve, I was going to get that IKon but when I went to order the sale was off and price was back to $239
Ikon is still $170 at helidirect.
Nov 28, 2012, 11:20 AM
Registered User
Quote:
Originally Posted by Dr.M
Well, it turns out the self-level on the Brain/Ikon is not 100% reliable and can get your heli into some pretty precarious positions at times. Vibes seem to be the main culprit.
I was wondering how reliable that feature would be as you only would normaly hit the switch in a bad situation.Does the Ikon have a vib log?They also claim it's vib resistant!
Steve
Nov 28, 2012, 11:41 AM
Southern Pride
everydayflyer's Avatar
Well most of the helis in this thread and other here in MiniHelis are electric and there is no logical reason for them to have vib issues in the first place. I also have a Ikon ordered and I have read most all post on it over on Heli Freak. No it is not as good as the $500 HC unit but at around 1/3 the cost (on sale) thus I am willing to give it a try.

At the rate stabilization units are advancing by next summer anyone should be able to fly a heli.

One of the Brain ( Ikon) threads on HF

http://www.helifreak.com/showthread....highlight=Ikon

Charles
Last edited by everydayflyer; Nov 28, 2012 at 02:11 PM.
Nov 28, 2012, 03:40 PM
Registered User
Dr.M's Avatar
The Brain/iKon gyro chips are some of the most vibe-resistant out there. However, accelerometers (used by the SL) by their nature get confused by vibes (which are acceleration). Once I dial in my Brain, I'll give SL a try just for sh*ts and giggles, but it'll be 4 mistakes high...

No vibe log on these units...
Nov 28, 2012, 03:41 PM
Registered User
Quote:
Originally Posted by ForceFedDSM
Ikon is still $170 at helidirect.
I just checked the price on Helidirect. I get 224. What is your link for 170
Nov 28, 2012, 03:59 PM
Registered User
Quote:
Originally Posted by Dr.M
The Brain/iKon gyro chips are some of the most vibe-resistant out there. However, accelerometers (used by the SL) by their nature get confused by vibes (which are acceleration). Once I dial in my Brain, I'll give SL a try just for sh*ts and giggles, but it'll be 4 mistakes high...

No vibe log on these units...
I'm going to set up the Ikon on my Beam so I will have low vibs confirmed with the Robird before the Ikon goes in.The Sl wasn't a deal breaker , just nice to have but not as usefull as it would have been when I had less expereince.
Steve
Nov 28, 2012, 09:23 PM
Registered User
ForceFedDSM's Avatar
Quote:
Originally Posted by clearprop88
I just checked the price on Helidirect. I get 224. What is your link for 170
Price was still showing $169 this morning when I went to work. It was listed on today's recommendations for you on the main page. Now it doesn't come up there and the price is back to normal.
Nov 28, 2012, 10:56 PM
as much as I can
beenflying's Avatar
Quote:
Originally Posted by Dr.M
Well, it turns out the self-level on the Brain/Ikon is not 100% reliable and can get your heli into some pretty precarious positions at times. Vibes seem to be the main culprit.
I thought most were having better success with SL (self level) now, using the latest firmware, and suitable mounting foam.

I've already setup the mixing in my Aurora 9 so I can have each of the 3 flight setups on a 3 way switch and another large single switch that always takes it to the 3rd flight mode, that has the SL enabled.
Nov 29, 2012, 07:12 AM
Lt. Col. Crash 'n Burn
Hi guys.

I need some help with my Robird G31 (I'm a FBL noob, btw).

I've connected everything, but my rudder servo doesn't move when I move the rudder stick?
When I move the cyclic servos, the rudder servo also move slightly..
When I run through the software setup guide and when I get to the Tail and Cyclic Limit, the rudder servo moves when I move the rudder stick.. I can adjust the end points and neutral point, but when I finish the setup guide and go back to "normal operation", the rudder stops moving again..

Any idea what I'm doing wrong?
Any help is very much appreciated.
Thanks.


\Martin
Nov 29, 2012, 07:13 AM
Lt. Col. Crash 'n Burn
Quote:
Originally Posted by netmav
Hi guys.

I need some help with my Robird G31 (I'm a FBL noob, btw).

I've connected everything, but my rudder servo doesn't move when I move the rudder stick?
When I move the cyclic servos, the rudder servo also move slightly..
When I run through the software setup guide and when I get to the Tail and Cyclic Limit, the rudder servo moves when I move the rudder stick.. I can adjust the end points and neutral point, but when I finish the setup guide and go back to "normal operation", the rudder stops moving again..

Any idea what I'm doing wrong?
Any help is very much appreciated.
Thanks.


\Martin
Ohh, and I forgot to mention that I'm running an Align DS520 rudder servo on my HK450PRO V2 FBL...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New ALZRC 3GY V2.0 FBL System boredom.is.me Mini Helis 125 Sep 13, 2012 10:58 AM
Alert Hobby King NEW 3 Axis Gyro Flybarless system w/USB Programmer $45 Mahu Hot Online Deals 6 Jun 20, 2012 03:45 AM
Discussion ALZRC Devil 450 PRO!! 3GY gyro ver 2.0.3 pitchp Mini Helis 7 Jun 10, 2012 10:30 PM
Discussion Hobbyking ZYX 3-Axis Flybarless System Gyro old4570 Electric Heli Talk 4 Mar 15, 2012 10:18 PM