New Products Flash Sale
Thread Tools
Old Nov 15, 2012, 01:06 PM
scribble007 is offline
Find More Posts by scribble007
Registered User
Quote:
Originally Posted by IFHELI View Post
The first 3GY V2 had a black plastic case. The newest one which has a blue label on top has a metal lower case.
Still no RPM sensor?
Sign up now
to remove ads between posts
Old Nov 15, 2012, 04:01 PM
SDHeliPilot is offline
Find More Posts by SDHeliPilot
RobirdUSA.com
SDHeliPilot's Avatar
Quote:
Originally Posted by scribble007 View Post
Ok
So, I'm about to put the finishing touches on my 6s 450 pro with the robird g31.
I'm going to triple check everything this time.
What kind of settings should I put in?

Use the sport default? or 3d default?
Yes, start out with the Sport settings and if you decide later that they are too tame then go to the 3D settings. After that you can try varying the rates and Agility settings to get the type of flight behaviors you want.

After you complete each of your first few flights under the Sport settings you should come back and hook up your G31 and run the Vibration Analysis tool. You'll have log of the entire flight and you can look for any vibration anomolies that might need to be addressed.
Old Nov 15, 2012, 04:38 PM
IFHELI is offline
Find More Posts by IFHELI
taking time on my ride
IFHELI's Avatar
No RPM sensor yet. I have two G31s on order that will come w/ sensor.
Old Nov 15, 2012, 05:25 PM
scribble007 is offline
Find More Posts by scribble007
Registered User
Quote:
Originally Posted by SDHeliPilot View Post
Yes, start out with the Sport settings and if you decide later that they are too tame then go to the 3D settings. After that you can try varying the rates and Agility settings to get the type of flight behaviors you want.

After you complete each of your first few flights under the Sport settings you should come back and hook up your G31 and run the Vibration Analysis tool. You'll have log of the entire flight and you can look for any vibration anomolies that might need to be addressed.
Now should I leave dual rates and expo out of my radio and adjust in the Robird program?

And yeah. I'm a little excited to have the vib analysis.
Old Nov 15, 2012, 06:39 PM
SDHeliPilot is offline
Find More Posts by SDHeliPilot
RobirdUSA.com
SDHeliPilot's Avatar
Quote:
Originally Posted by scribble007 View Post
Now should I leave dual rates and expo out of my radio and adjust in the Robird program?

And yeah. I'm a little excited to have the vib analysis.
If you're used to setting your Expo in your transmitter you can continue to use that. Otherwise if you want to set the Expo in the G31 Performance tab just remember that the negative values will provide a slower and smoother feel around mid-stick.
Old Nov 15, 2012, 07:58 PM
scribble007 is offline
Find More Posts by scribble007
Registered User
Hate getting hung up on the little stuff.
Can some one tell me how to bind to the robird when Im using just a dsm2 satalite plugged into the robird?
Do i have to bind the sat to a full receiver then plug it in to the robird?

Thanks

And how have you guys set the esc?
Analog
or 1.5ms @ 125hz?
ect ect
Last edited by scribble007; Nov 15, 2012 at 08:15 PM.
Old Nov 15, 2012, 09:46 PM
scribble007 is offline
Find More Posts by scribble007
Registered User
And now that I have solved all of my problems from the previous post.
My tail is acting funny. Its very slow to my control inputs when the light is blue and VERY slowly counter acts tail movements.
But when the light is red, No tail control
This normal?
Old Nov 16, 2012, 02:54 AM
Atomic Skull is offline
Find More Posts by Atomic Skull
Registered User
Atomic Skull's Avatar
Quote:
Originally Posted by scribble007 View Post
And now that I have solved all of my problems from the previous post.
My tail is acting funny. Its very slow to my control inputs when the light is blue and VERY slowly counter acts tail movements.
But when the light is red, No tail control
This normal?
Assuming this is actually in the air then no it's not.
Old Nov 16, 2012, 06:06 AM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Quote:
Originally Posted by scribble007 View Post
And now that I have solved all of my problems from the previous post.
My tail is acting funny. Its very slow to my control inputs when the light is blue and VERY slowly counter acts tail movements.
But when the light is red, No tail control
This normal?
Have your read the instructions? Reason I ask is that with many FBL units Red indicates HH mode and Blue indicates rate mode each of which behaves very differently.


Charles
Old Nov 16, 2012, 11:26 AM
SDHeliPilot is offline
Find More Posts by SDHeliPilot
RobirdUSA.com
SDHeliPilot's Avatar

New Robird G31 Users Manual released


We've just released a new users manual for the Robird G31 flybarless system. This new manual covers the PC setup process, setting the governor and also provides further details on the settings in the Performance tab.

The manual covers the new 0.98D software version which will be released shortly but the rest is basically the same for the current 0.98C version.

The manual can be downloaded from www.robird.net/g31.

Let us know what you think! This was a collaborative effort and we think you'll find the manual very helpful.

Also, we'll be announcing the website for the U.S. distributor for Robird very soon. Keep watching here for details.
Old Nov 16, 2012, 12:16 PM
scribble007 is offline
Find More Posts by scribble007
Registered User
Quote:
Originally Posted by everydayflyer View Post
Have your read the instructions? Reason I ask is that with many FBL units Red indicates HH mode and Blue indicates rate mode each of which behaves very differently.


Charles
Being that they were posted an hour ago.
No :P
BUT, Now that Iv had a chance. I think I can figure it out.
Amazing how helpful the user manual can be **Turns in man card**
Old Nov 17, 2012, 12:57 AM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
Quote:
Originally Posted by SDHeliPilot View Post
We've just released a new users manual for the Robird G31 flybarless system. This new manual covers the PC setup process, setting the governor and also provides further details on the settings in the Performance tab.

The manual covers the new 0.98D software version which will be released shortly but the rest is basically the same for the current 0.98C version.

The manual can be downloaded from www.robird.net/g31.

Let us know what you think! This was a collaborative effort and we think you'll find the manual very helpful.

Also, we'll be announcing the website for the U.S. distributor for Robird very soon. Keep watching here for details.
Excellent! This gyro is destined to be the next vbar, for less than half the price.
Old Nov 17, 2012, 08:52 AM
ridge_racer is offline
Find More Posts by ridge_racer
Registered User
New TGY-211DMH installed on the cyclics...
New Turnigy TGY-211DMH cyclic servo with ALZRC 3GY V2 (Robird G31) (3 min 6 sec)
Old Nov 17, 2012, 06:27 PM
beenflying is offline
Find More Posts by beenflying
as much as I can
beenflying's Avatar
Thanks for the video, ridge_racer. Can't wait to get my 211's.

Did you get a chance to try other servo arms, or did you just use the ones supplied?
Old Nov 17, 2012, 08:14 PM
Dr.M is offline
Find More Posts by Dr.M
Registered User
Dr.M's Avatar
Quote:
Originally Posted by beenflying View Post
Excellent! This gyro is destined to be the next vbar, for less than half the price.
Now that is some pretty tall praise...

Quote:
Originally Posted by ridge_racer View Post
New TGY-211DMH installed on the cyclics...http://youtu.be/V7FfyrTRJzk
these ought to be better than the Solars... they cost twice as much. But are they twice as good?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New ALZRC 3GY V2.0 FBL System boredom.is.me Mini Helis 125 Sep 13, 2012 11:58 AM
Alert Hobby King NEW 3 Axis Gyro Flybarless system w/USB Programmer $45 Mahu Hot Online Deals 6 Jun 20, 2012 04:45 AM
Discussion ALZRC Devil 450 PRO!! 3GY gyro ver 2.0.3 pitchp Mini Helis 7 Jun 10, 2012 11:30 PM
Discussion Hobbyking ZYX 3-Axis Flybarless System Gyro old4570 Electric Heli Talk 4 Mar 15, 2012 11:18 PM