New Products Flash Sale
Thread Tools
Old Nov 12, 2003, 11:43 AM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
Yippee!

What is on your building table?


With winter coming and the shorter hours of daylight I was just wondering what some of you had lined up to build? What are some of the fun and interesting projects you have been putting off that you will be building?

Next up for me is what was on my kitchen table when I arrived home on Monday. Ah! the smell of balsa . I opened the package to find a nicley lazer cut bunch of sheets of balsa. A Dave Blum Cessna 182. I will be building it, plus scratch building one at the same time for a fellow ezoner (and new MM 180 owner). The kit is one of the only remaining beta kits of this beauty produced by Dave Blum. I have a Mountain Models Cessna 180 and just had to have a dblum 182. They just seem to go together. In the next few days I will be starting a build thread on it. Dave has been busy moving and last he told me he is working on getting the plane kitted. Which I am sure will make all those 180 fliers out there happy. For those who have not seen it, the folliwing pics are of Dave's and Geralds 182's.

Again be sure and post some of what you will be working on in the coming weeks/ months.

Bare bones 182 of Daves:
Last edited by Arrow; May 22, 2008 at 11:22 AM.
Sign up now
to remove ads between posts
Old Nov 12, 2003, 11:45 AM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
Sweetly covered look at Daves:
Old Nov 12, 2003, 11:46 AM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
another look:
Old Nov 12, 2003, 11:47 AM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
a couple of Geralds:
Old Nov 12, 2003, 11:50 AM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
last one:
Old Nov 12, 2003, 12:04 PM
SlowRider is offline
Find More Posts by SlowRider
It's the last plane honey
SlowRider's Avatar
Arrow,

Well, I just recently found out (my daughter let it slip ) that I will be getting a Stevens Aeromodel G-480 Groove for Xmas. I should have my Miniflash finished by Thanksgiving, so just in time for the new project.

Nice covering jobs, are you using Solite?

Andy
Old Nov 12, 2003, 12:09 PM
Arrow is offline
Find More Posts by Arrow
Crash happens! :)
Wish I could say they were mine but no I am only an observer of beauty on those two planes. I am not positive on what they covered in. I will have t do some checking and find out.

Sounds like you have a couple fun builds lined up.
Old Nov 12, 2003, 12:12 PM
crashsiegel is offline
Find More Posts by crashsiegel
Tree? That's a Tx weed!
crashsiegel's Avatar
Let's see:
1. JK Big-T (ok, at 6ft ws NOT a parkflyer!)
2. MA Scratch One (son's first scratch build)
3. Push-E Cat (not a parkflyer, really)
4. SR Batteries Blues (indoor/parkflyer)
Subject to change without ryhme or reason or notice <G>.
Crash
Old Nov 12, 2003, 12:34 PM
WJ Birmingham is offline
Find More Posts by WJ Birmingham
Registered User
WJ Birmingham's Avatar
I have a big darn mess at the moment which needs to be cleared so I can get back to building.

1. Darth Smaul Beta (if it's still going on)
2. Old School RC Spacewalker
3. Zipper 010 (to replace the one a hangar wall ate at an indoor fly-in)
Old Nov 12, 2003, 12:38 PM
Rob Schaffer is offline
Find More Posts by Rob Schaffer
Scale Builder, RCAPA #29
Rob Schaffer's Avatar

Winter Building Board,....


Currently, I still have my Sig Rascal to finish modifying and covering. Attached is a current progress photo of that one. Next on the building board is the Molt Models Hellcat. I was quick to get a kit while I could, so I hope to get that built and finished.
Old Nov 12, 2003, 01:05 PM
Paul Susbauer is offline
Find More Posts by Paul Susbauer
Balsa Builder
Paul Susbauer's Avatar
Oh Ive got something coming to me....

and I'm building another Spacewalker.

--Paul
Old Nov 12, 2003, 01:16 PM
Jim Poor is offline
Find More Posts by Jim Poor
Closet Extrovert
Jim Poor's Avatar
I've got a Meridian coming, I want to do a really cool covering. (My wife will help, I hope)
Need to finish a Darth Smaul, but the wings are not cooperating at the moment.
I have an Electro Streak ARF that I am just waiting to get a big honkin' BL motor for.
Got a VIP on the way, but there's not much to build there.
another Wind Buster 30 inch V-tail that I may finish tonight.

A few bits and pieces that I may make into a Franken Plane.
Old Nov 12, 2003, 02:12 PM
CAFplanekid is offline
Find More Posts by CAFplanekid
De-Brushed user
Im working on a
Cub for RFFS system
FFF 3d plane for RZ2500
Aerocraft Apache for Jeti 30/3
Old Nov 12, 2003, 02:30 PM
Phreakish is offline
Find More Posts by Phreakish
Nickel what?
Phreakish's Avatar
For this winter Im starting my first REAL scratch build... I've put spare parts together and made them fly in formation, but this is new

Its a Grumman F3F, designed to fly around a GWS EPS gearbox, or pjs/nippy brushless, and will also accomodate the speed 400 GWS DD stick mount...

Check out the "Grumman F3F?" thread for more info... hopefully I'll have a flying model for the spring
Old Nov 12, 2003, 02:33 PM
roguewolf is offline
Find More Posts by roguewolf
MEDIC!!!!!!!
roguewolf's Avatar
First, I have to finish this for Thomer....a Speedy Bee


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool What is on your workbench????? The Don North Coast Electric Flyers 6255 Apr 05, 2015 06:52 PM
WHat's on your building table? Tram Parkflyers 64 Dec 29, 2011 08:12 PM
Discussion What's on your building board this winter? Steve85 Scale Kit/Scratch Built 40 Feb 11, 2007 11:28 AM
what controls do what on your Tx. I think mine are wrong. Fragster2001 Micro Helis 7 Jul 01, 2004 07:31 AM
Whats on your Building Board? Auger Din Parkflyers 78 Sep 19, 2003 11:04 PM