Some more videos by plexus.

RTH (1 min 58 sec)

zigzag (3 min 8 sec)

Alright I'm sold, where can I get one in the USA and the ESC32's

Sorry if this has been asked before.....but 80 pages is a lot of reading

Originally Posted by IceFyre13th

Alright I'm sold, where can I get one in the USA and the ESC32's

Sorry if this has been asked before.....but 80 pages is a lot of reading

Jussi is currently talking to distributors for North America - but that'll take some time. We need to make sure that these are supporting the project and not just reselling the items.

If you need a set soon you can order some from ViaCopter in Denmark. Jussi's company is registred for export so you can substract 25% from the EU sales prices.

AQ6 FC: http://viacopter.eu/shop/flight-cont...blic-beta/8-95
ESC32: http://viacopter.eu/shop/escīs/autoquad-esc32/17-93

btw: the "Beta" tag refers to the firmware/software, not the hardware!

To give you some more to feed your confidence, take a look at the playlists with flight videos from our beta testers:
http://www.youtube.com/user/MrKinder...sort=da&view=1

Originally Posted by kinderkram

btw: the "Beta" tag refers to the firmware/software, not the hardware!

Kinderkram, is there any plan to man-up and drop the beta label, perhaps on the first public anniversary? Or will that always be the ace card to deal with reports of bugs?

Originally Posted by DaveyWavey

Kinderkram, is there any plan to man-up and drop the beta label, perhaps on the first public anniversary? Or will that always be the ace card to deal with reports of bugs?

Heck, noooo! That'll be July/August then.
After half a year of public beta testing I'm confident we'll get rid of that lable soon.

Seriously: if all works well with the latest revision we'll have a release candidate with a "stable" tag.

Has anyone done up a printed 3d case for the AQ6 FC yet?

Originally Posted by GoneSilent

Has anyone done up a printed 3d case for the AQ6 FC yet?

https://www.rcgroups.com/forums/show...postcount=1171

Hmmmmm,
Thinking I might try to create an automated device based on a 3 axis gimbal to automate the dynamic calibration... Magnetic affects need to be considered carefully but the thought of a geometrically "perfect" and repeatable Calibso is appealing.

Originally Posted by DaveyWavey

Hmmmmm,
Thinking I might try to create an automated device based on a 3 axis gimbal to automate the dynamic calibration... Magnetic affects need to be considered carefully but the thought of a geometrically "perfect" and repeatable Calibso is appealing.

I won't hold you back!

But the device needs to be big enough to carry a fully equipped copter.
And best use only wood or plastic to avoid irritations of the sensors by magnetic material.

Im thinking three contric wooden squares, with the inner on just big enough for my F450 frame......

Originally Posted by kinderkram

Jussi is currently talking to distributors for North America - but that'll take some time. We need to make sure that these are supporting the project and not just reselling the items.

If you need a set soon you can order some from ViaCopter in Denmark. Jussi's company is registred for export so you can substract 25% from the EU sales prices.

AQ6 FC: http://viacopter.eu/shop/flight-cont...blic-beta/8-95
ESC32: http://viacopter.eu/shop/escīs/autoquad-esc32/17-93

btw: the "Beta" tag refers to the firmware/software, not the hardware!

To give you some more to feed your confidence, take a look at the playlists with flight videos from our beta testers:
http://www.youtube.com/user/MrKinder...sort=da&view=1

Controller and 4 esc's 5 555.00 Euro equals 743.87 US Dollar
subtract 25 % $185.9925 = 557.8775.....don't even have the gps and other accessories added in yet.....wonder how the price will be effected once mass production happens

Originally Posted by IceFyre13th

Controller and 4 esc's 5 555.00 Euro equals 743.87 US Dollar
subtract 25 % $185.9925 = 557.8775.....don't even have the gps and other accessories added in yet.....wonder how the price will be effected once mass production happens

GPS is build in and the antenna come with it.

Davey

Here's a look at Arne's machine for making dynamic logs with large multicopters.

http://forum.autoquad.org/viewtopic....it=octo#p10147

Larry

Originally Posted by DaveyWavey

Im thinking three contric wooden squares, with the inner on just big enough for my F450 frame......

Dialfonzo, looking forward to the case. Are you going to share the files for those who can print at home or?

Anyone Should I order Graupner MX-20? Or just use one of my Futaba 8fgs? I kind of am fearing the S-Bus stuff Ive seen on forum and wiki.

Originally Posted by GoneSilent

Dialfonzo, looking forward to the case. Are you going to share the files for those who can print at home or?

Anyone Should I order Graupner MX-20? Or just use one of my Futaba 8fgs? I kind of am fearing the S-Bus stuff Ive seen on forum and wiki.

Ok, the case has been ordered for a final test fit with the AQ6.
Once all is tested then we will talk about files and such..