Autoquad 6 Autonomous Flight Controller - Page 70 - RC Groups
Thread Tools
Dec 06, 2012, 08:20 PM
Registered User
Quote:
Originally Posted by rkenosha
Can the 32escs be used with any flight controller. Thanks rkenosha
is it a question ?
anyway... YES. atm no i2c support for mk but for the rest of FC the ESC32 is a great alternative.
take care only to one thing. if you plan to use multiwii or apm you have to change a setting in the esc32 to fit the output specifications of those flight controllers.

take a look here : http://autoquad.org/wiki/wiki/esc32/...ion-and-modes/ .
in specific you must change PWM_MIN_PERIOD and PWM_MIN_VALUE to be 2000 and 900. read the wiki and you have no problem. i personally tested and it works very... very well.
Sign up now
to remove ads between posts
Dec 12, 2012, 03:15 AM
Registered User
OnceAFly's Avatar
Ok I just place my order! Now just wait for the aq6
Dec 13, 2012, 08:37 PM
Registered User
i just finish th pid tuning. my quad is 650 size, 4822/600kv, apc1147 running 3s3000ma. 1.2kg total weight. however i m using rateP 25, i m worry about if i increase the weight, use 4s5500ma and apc1238, can sufficient rateP for me to downsteam?

i m worry aq cant handle powerful torque quad, since aq very sensitive.
Dec 14, 2012, 11:58 AM
Registered User
Hi there

I regret to announce that I will quit using the AQ. After days and days, and days of PID tuning this thing just don't want to fly good enough in position hold. I know it's my fault but I can't get it right..

GPS, Groundpane & Board will be included, together with jumpers, and the rest of the pinheaders.
Also the ftdi module and bluetooth module will be included.

€350 and it's yours. The standard AQ with GPS and a few extra's that you will need anyways..
We can talk about price.

Static logs will be included if you want. They are almost perfect!

Jesse
Dec 18, 2012, 05:04 AM
Registered User
Why its a silence on the forum
Dec 18, 2012, 07:20 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by farooq_niaZ
Why its a silence on the forum
We usually only post general info here.
If you need support, come over to our own forums:
http://forum.autoquad.org/
Dec 18, 2012, 07:41 AM
pbw
pbw
arachnida
pbw's Avatar
Hello,
I'm a newbie here, but not new to all sorts of multirotors like OP, MK, DJI, MWii and others.

I've got a rev 2 board from a friend and connected it to a PSU 12V output. The reading in the QGC is way too high, 14.6V. I've checked the resistor R4 on the board and it reads around 8.4K (on board measurement). The log voltage7 reading gives me 1.99V. But here I'm a bit confused, the wiki reads:

VIN 7 Voltage read from R3, R4 voltage divider. Rev1 board (4.7k): LOG_VOLTAGE6 / .221 = Vin; Rev2 board (8.45k): LOG_VOLTAG6 / .136 = Vin;

Do I have to use LOG_Voltage6 or 7? I guess 7 is correct, but the calculation in the WIKI is done on 6?!?

If I calculate the reading and divide by 0.136 for a rev2 board I get 14.63V, also what I see in the QGC.

What am I doing wrong?

Cheers,
arachnida
Dec 18, 2012, 03:01 PM
Registered User
PBW, was the firmware you loaded for the v2 board?If you installed v1 it would show the main voltage being read wrong.
Dec 18, 2012, 04:44 PM
pbw
pbw
arachnida
pbw's Avatar
Yes, quite sure it is for v2!
Dec 19, 2012, 12:34 PM
Registered User
noppita's Avatar
I am builder a octo Autoquad + configuration.

anyone has motor configuration file, please let me have it.

thank you
Dec 19, 2012, 04:28 PM
OS Sponsor
kinderkram's Avatar
http://forum.autoquad.org/viewtopic.php?f=33&t=1646

I'm sure Larry or Steve will lend you a hand.
Dec 20, 2012, 06:44 AM
Registered User
noppita's Avatar
thank you kinderkram
Dec 22, 2012, 12:36 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
soon...real soon...
Dec 22, 2012, 04:01 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by Dialfonzo
soon...real soon...
What... umm what?
Dec 22, 2012, 06:03 PM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by kinderkram
What... umm what?
Board at custom...!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Autoquad team proudly presents: Autoquad ESC32 JussiH Multirotor Drone Electronics 301 Apr 16, 2016 10:05 PM
Discussion Naza dji sh gps - south hemisphere public beta testers results! Velociraptor73 Multirotor Drone Talk 26 Nov 20, 2012 02:45 AM
Discussion How Bloomberg's Soft Drink Ban Will Backfire on NYC Public Health MtnGoat Life, The Universe, and Politics 1 Jun 27, 2012 12:19 AM
Discussion The AutoQuad! [ video ] kapteinkuk Multirotor Drone Talk 5 Jun 10, 2012 12:19 PM
Download G-3 Public Beta (.426) is out. Includes Airplane Importer! L0stS0ul Simulators 37 Mar 03, 2006 06:28 PM