Thread Tools
Oct 29, 2012, 09:47 AM
youtube.com/#/user/flyrobots
Hi,

this is my second step (marking point to down) and i heat the FC 1.5 hour. I dont know why Gyro Y (green one) sensor alway get disturb (now with spike).
Is this log usable ?

Please be adviced ?

Many Thanks,

John
Sign up now
to remove ads between posts
Oct 29, 2012, 10:01 AM
DJI Testing / US Support
blade strike's Avatar
Yes that bubble is a none issue... It seems most of us get it right about that point. If you do a search on the autoquad forums.. You will see some good examples..

Your log looks very clean, use it and fly
Latest blog entry: QUICK TIPS - Spark
Oct 29, 2012, 06:29 PM
youtube.com/#/user/flyrobots
Thanks Blade strike,

How about the spike on green line on gyro? Is it acceptable?

Thanks,

John
Oct 29, 2012, 09:20 PM
AutoQuad OS developer
maximal's Avatar
John, the glitch on the gyro isn't ideal, but not a deal-breaker. Just get a few logs and be as careful as possible. Then use the best ones overall. Humidity seems to be the biggest issue to overcome in your situation. I'd say you don't need to get it quite as cold as -25, and maybe it would warm up a bit quicker and get warmer overall if it started out at -15 or -10 (I'm guessing you don't see freezing temperatures very often). Shorter logging time also means less chance of it getting disturbed.

-Max
Oct 30, 2012, 08:33 AM
OS Sponsor
kinderkram's Avatar
Hi John,
as Max already mentioned do some more logs and try to get rid of the crincle in the gyro.

All other logs look fine - the temp curve is reasonable for your region. Then take the best files for the calculation...
Oct 30, 2012, 11:41 AM
youtube.com/#/user/flyrobots
Thanks for your advice.
@Max. I freeze it 2 hour and i got around -5 this is the best effort from my 5 years old 3 door refrigerator. I checked with my thermometer it show -5. More than that is almost impossible. I just want know why only -5 degree. Today, I asked freezer service come and add some freon. he said nothings wrong with my freezer. So its confirm -5 is the best effort.

I think now im learning how to get the best data log. Yes humidity is the biggest problem. I need more silica gel in the ziploc.
And i still dont know why the crinkle of the gyro always in same place and same axis.
On next weekend i will try do more log with different place and use the best one to go next step dynamic and calculation.

John
Last edited by Flyrobot; Oct 30, 2012 at 12:04 PM.
Oct 30, 2012, 11:52 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by Flyrobot
Thanks for your advice.
I think now im learning how to get the best data log. Yes humidity is the biggest problem.
And i still dont know why the crinkle of the gyro always in same place and same axis.
On next weekend i will try do more log and use the best one to go next step dynamic and calculation.

John
We've seen those crinkles in other logs. They didn't affect the operations on the copters. If you can't get rid of them, just take the best file...

Norbert
Oct 30, 2012, 12:09 PM
youtube.com/#/user/flyrobots
Hi Norbert,

Thanks.

John
Oct 30, 2012, 05:19 PM
AutoQuad OS developer
maximal's Avatar
Quote:
Originally Posted by Flyrobot
Thanks for your advice.
@Max. I freeze it 2 hour and i got around -5 this is the best effort from my 5 years old 3 door refrigerator. I checked with my thermometer it show -5.
I think I was looking at the wrong line in your graphs then... Temp0 is the actual temperature, and I thought on yours it was the red line, not the green one. So in that case your temperature range is great!

(Next version of QGC will have a color legend for the graph values! )

-Max
Oct 31, 2012, 07:38 PM
Registered User
Quote:
Originally Posted by Andre6553
This might be an option for hitec and jr radios
https://www.rcgroups.com/forums/show....php?t=1725622
I picked up one of these for my Aurora 9 and so far so good. I set up a Spektrum satellite receiver that I was using with a DX6i and got my channels all set up and end points where they should be. Hopefully I can fly with it tomorrow and leave the DX6i on the shelf.
Oct 31, 2012, 10:05 PM
Quadcopter Addict
I got my Autoquad 6 to the point of hovering and needing to be tuned. I have not messed with it since, due to other commitments. My freeze and dance calibrations could probably be better. Anyway, I don't have the time to mess with it now and will make a US buyer a good deal on it. PM me.
Last edited by oddcopter; Oct 31, 2012 at 10:11 PM.
Nov 01, 2012, 05:10 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by oddcopter
I got my Autoquad 6 to the point of hovering and needing to be tuned. I have not messed with it since, due to other commitments. My freeze and dance calibrations could probably be better. Anyway, I don't have the time to mess with it now and will make a US buyer a good deal on it. PM me.
Waiting for the "Revo" next year will be a time consuming task, eh?
Make a good price and you'll surely find a buyer soon...
Nov 01, 2012, 08:19 AM
Quadcopter Addict
I would sell the board and gps for $299 shipped to a US buyer.
Nov 01, 2012, 09:54 AM
Registered User
Quote:
Originally Posted by oddcopter
I would sell the board and gps for $299 shipped to a US buyer.
PM Sent
Nov 02, 2012, 07:48 PM
Registered User
Is this project still going on? I'm thinking of getting a new flightcontroller.. I have the Naza & GPS now.. I love them but I just want something new.. Was thinking of the CC3D but it doesn't support position hold and such.

Hope this flightcontroller isn't just another lost project. Still in development?
Any hardware updates coming on ?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Autoquad team proudly presents: Autoquad ESC32 JussiH Multirotor Drone Electronics 301 Apr 16, 2016 09:05 PM
Discussion Naza dji sh gps - south hemisphere public beta testers results! Velociraptor73 Multirotor Drone Talk 26 Nov 20, 2012 01:45 AM
Discussion How Bloomberg's Soft Drink Ban Will Backfire on NYC Public Health MtnGoat Life, The Universe, and Politics 1 Jun 26, 2012 11:19 PM
Discussion The AutoQuad! [ video ] kapteinkuk Multirotor Drone Talk 5 Jun 10, 2012 11:19 AM
Download G-3 Public Beta (.426) is out. Includes Airplane Importer! L0stS0ul Simulators 37 Mar 03, 2006 05:28 PM