Autoquad 6 Autonomous Flight Controller - Page 46 - RC Groups
Thread Tools
Oct 10, 2012, 03:27 AM
Aleksey Kharlanov
Quote:
Originally Posted by bob4432
I am not a developer and can see it just fine...
I'm talking about L1+DCA algorithm, not about Pin mapping. All articles I can view just fine except L1
Sign up now
to remove ads between posts
Oct 10, 2012, 03:30 AM
Registered User
bob4432's Avatar
Quote:
Originally Posted by Sir Alex
I'm talking about L1+DCA algorithm, not about Pin mapping. All articles I can view just fine except L1
my bad, thought you were talking about pin mapping - didn't read your whole post, sorry
Oct 10, 2012, 04:12 AM
OS Sponsor
kinderkram's Avatar
Sorry for the confusion, guys!
It's been decided that the info about the L1+DCA will only be available for developers since it's a very early stage of development and not meant to be part of the beta testing.

Good news is: AQ6 boards are available in the stores for the next round of beta testers!
http://viacopter.eu/index.php?page=s...mart&Itemid=53
http://flyduino.net/Autoquad-6-public-beta-Version_1
Oct 10, 2012, 05:19 AM
Registered User
When will it be available to be used with normal receiver's as I use the JR8XG radio,many thank's,Marty.
Oct 10, 2012, 05:50 AM
AutoQuad OS developer
maximal's Avatar
Quote:
Originally Posted by NEAGRON
When will it be available to be used with normal receiver's as I use the JR8XG radio,many thank's,Marty.
It works with PPM input now, so any Rx can be made to work. Some have PPM output built in now, some can be modified, and for others a PPM converter could be used.

If you mean direct PWM input from each channel of a Rx, the answer is probably "never." Although with 14 input/output ports, it would be possible, if someone wanted to write the code. A 1-wire PPM connection is much simpler though.

-Max
Oct 10, 2012, 05:51 AM
J'ai remis la purée
Quote:
Originally Posted by NEAGRON
When will it be available to be used with normal receiver's as I use the JR8XG radio,many thank's,Marty.
In its current hardware form? Never, why give up 6-8 ports for standard receivers. If you want to use 'normal' receivers you can use a pwm-ppm converter board.
Oct 10, 2012, 10:10 AM
youtube.com/#/user/flyrobots
Is it any info how to make Graupner Hott receiver telemetry work with AQ ?

Thanks,

John
Oct 10, 2012, 10:14 AM
Live for speed
GoFaster's Avatar
This might provide the info you are looking for:

http://autoquad.org/wiki/wiki/development/user-add-ons/mavlink-led-signaling-hott/

Quote:
Originally Posted by Flyrobot
Is it any info how to make Graupner Hott receiver telemetry work with AQ ?

Thanks,

John
Oct 10, 2012, 10:24 AM
youtube.com/#/user/flyrobots
Quote:
Originally Posted by GoFaster
Hi GoFaster,

Many thanks, this is what im looking for.

John
Oct 10, 2012, 03:06 PM
DVE
DVE
Registered User
Quote:
Originally Posted by kinderkram
Good news is: AQ6 boards are available in the stores for the next round of beta testers!
Bought one yesterday, today received a tracking number. Cool

Quote:
Originally Posted by maximal
If you mean direct PWM input from each channel of a Rx, the answer is probably "never." Although with 14 input/output ports, it would be possible, if someone wanted to write the code. A 1-wire PPM connection is much simpler though.
Btw, are there any S-Bus Futaba cheap clones, tested with AQ?

Something like this http://www.hobbyking.com/hobbyking/s...ompatible.html or http://www.hobbyking.com/hobbyking/s..._Receiver.html
Oct 10, 2012, 03:58 PM
AutoQuad OS developer
maximal's Avatar
Quote:
Originally Posted by DVE
Btw, are there any S-Bus Futaba cheap clones, tested with AQ?
We've only heard from one user so far who tried to use a FrSky FAAST/SBus Rx and it didn't go very well.

http://forum.autoquad.org/viewtopic....start=30#p5746

So far it seems like only genuine Futaba receivers work with SBus. It is not clear why, since the SBus protocol is pretty straight-forward (although Futaba has never published any specs that I know of, and all the current 3rd party implementations seem to be based on one person's analysis of the protocol). More testing is needed.

-Max
Oct 11, 2012, 04:57 AM
Vulcan skyhook multirotor
Andre6553's Avatar
fatuba has a sbus addapter
https://www.rcgroups.com/forums/show...3&d=1345133817
Oct 11, 2012, 05:09 AM
AutoQuad OS developer
maximal's Avatar
Quote:
Originally Posted by Andre6553
https://www.rcgroups.com/forums/show...&postcount=638
Oct 11, 2012, 05:13 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by Andre6553
This is exactly the one causing troubles since it has its own failsafe function which can't be disabled!
So we can't recommend this atm.
Oct 11, 2012, 05:21 AM
AutoQuad OS developer
maximal's Avatar
Well that's not really the problem (although it is an additional issue with that converter), but it's definitely causing trouble.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Autoquad team proudly presents: Autoquad ESC32 JussiH Multirotor Drone Electronics 301 Apr 16, 2016 10:05 PM
Discussion Naza dji sh gps - south hemisphere public beta testers results! Velociraptor73 Multirotor Drone Talk 26 Nov 20, 2012 02:45 AM
Discussion How Bloomberg's Soft Drink Ban Will Backfire on NYC Public Health MtnGoat Life, The Universe, and Politics 1 Jun 27, 2012 12:19 AM
Discussion The AutoQuad! [ video ] kapteinkuk Multirotor Drone Talk 5 Jun 10, 2012 12:19 PM
Download G-3 Public Beta (.426) is out. Includes Airplane Importer! L0stS0ul Simulators 37 Mar 03, 2006 06:28 PM