Thread Tools
Nov 18, 2012, 05:25 AM
Registered User
today i worked out the first steps of the side view how the fuse needs to look like.

Sign up now
to remove ads between posts
Nov 18, 2012, 06:52 AM
Registered User
Nice 2d. I whould like to see V tail with single EDF I think whould be faster. PS like your wing & tail fin is this box fuse
Nov 18, 2012, 07:47 AM
Registered User
@SPACE1,
I would say , take the design and build it like you want it. And see what is faster .
I prefer to have the thrustline in line whit the wing . Making it whit single edf, i do not know how it needs to look like, do you have ideas? (Think about the thrustline).

The fuse is a box. Whit that the fuse will be smaller than a round fuse is, when putting in 2x 4s1p lipo
Nov 18, 2012, 07:54 AM
Registered User
Just looked for a lot of minutes to the side view, and saw that it needs to be changed. The fuse height can be smaller. There is a lot of air around the lipo`s, that needs to be changed.
Back to the drawing board
Nov 18, 2012, 09:22 AM
Registered User
and the design in 3D.
I didn't do the wing, stab and elevator in profile, just flat. The main reason it is in 3D, is to look how the space in the fuse is. At the moment i don't know if i will make the fuse smaller. There still needs to be some formers in the fuse for strenght and to give the fuse his shape. When making the fuse smaller i think the problem will be to get the lipo's in and also the wires. I made the mistake whit the uriah, that the lipo wherefor i build it, didn't fit. Ok, the lipo did fit, but not whit the wires on it. And till now there aren't wireless lipo's




Last edited by Hoeby; Nov 18, 2012 at 09:32 AM.
Nov 18, 2012, 02:10 PM
3d and EDF, some scale
MustangAce17's Avatar
I've had a design on posterboard for a year or so and it seems like I have the fan combo needed in my Phazer. It produces very high efflux and the Phazer is extremely fast so I hope this one will be to. It's hotliner esqe with a side intake design, I'll post a pic after I rough the fuse out. 60mm on 6s 2200 is the plan
Nov 19, 2012, 12:49 PM
Registered User
same jet design, but the drawing is whit more detail.


Nov 19, 2012, 01:12 PM
My project: FAIREY DELTA 1
Erik v. Schaik's Avatar
Good progress! I do see some similaritys of my concept

In theory you could place 1 fan in the centre and a fuse along the side (like a simplified Rutan Ares). That might be a good option to create good batterie space for high power setup (for a single fan jet) and good space for hardware.
With some creativity you can increase wing and elev mounting strenght as well.

I often noted closing a bifurcated exhaust on one side to gain intake efficiency on a Pyranha or Sniper like Ares.

Just a thought at Luft46 there is a jet designed like this but cannot find the model in short time notice.

grtz,
Erik
Nov 19, 2012, 01:17 PM
My project: FAIREY DELTA 1
Erik v. Schaik's Avatar
http://www.luft46.com/jgart/jg792.html
Nov 19, 2012, 01:35 PM
Registered User
Quote:
Originally Posted by Erik v. Schaik
I often noted closing a bifurcated exhaust on one side to gain intake efficiency on a Pyranha or Sniper like Ares.
I think you mean bifurcated intake, not exhaust?
Nov 19, 2012, 03:14 PM
My project: FAIREY DELTA 1
Erik v. Schaik's Avatar
yeah! typo
Nov 19, 2012, 03:49 PM
Claus at Area 52
clausxpf's Avatar
and my super sling-jet might be one .
with franks insane fan.
Claus
Nov 21, 2012, 12:38 AM
Lee Liddle
Knife Liddle's Avatar
So here's where all you speed freeks are hanging out. I've got some stuff in the works. Just need some new motivation. Some fellow crazies will do the trick.
Nov 21, 2012, 09:39 PM
3d and EDF, some scale
MustangAce17's Avatar
Lee, I consider you one of the definitive speed freaks. I'm hoping my design hits 180 plus
Nov 21, 2012, 10:55 PM
F-OFF
imyohero's Avatar
I have a couple ideas kickin around one being an asymmetrical design.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion How do you guys feel about Nitroplanes? (The company) rckatz Nitro Planes 36 Nov 29, 2012 04:33 PM
Question Question about flying wing CG and how it might be affected by adding a fuse daronj Foamies (Scratchbuilt) 2 Jul 01, 2012 01:10 PM
Contest Hobby Lobby Lynx Speed Contest!!!! CONTINUED NEW Current top speed is 139.6 mph! dpowellmeii Pusher Prop Jet Models 7 May 21, 2012 11:52 AM
Rave How about a Tiger Moth gliding contest? swooper GWS (Grand Wing Servo) 3 Nov 08, 2003 03:09 PM