TX battery help - Eurgle 9x & Dragonlink - RC Groups
Thread Tools
Jul 02, 2012, 04:51 AM
Registered User

TX battery help - Eurgle 9x & Dragonlink

Hey all,

I have an eurgle 9x radio and have been using a life 1500mah 9.9v battery from new. It works fine. No complaints.

I now have a dragonlink UHF running off the pins when i remove the 2.4ghz module. It works fine too.

But im looking at getting the best battery solution for running these two.

I have read some people use a 3s lipo, turnigy have 2650mah packs, some say great, some say too much voltage. I've also read some people use sanyo eneloop nimh packs too, much safer and still 2000-2500mah.

What battery do u guys recommend using to run the TX & Dragonlink.. Id like the longest lasting option between charges, so as to not run into unexpected dramas in the field.

Thanks in advance
Sign up now
to remove ads between posts
Jul 02, 2012, 07:56 PM
Registered User
No one, surely there is someone out there who uses a 9x with dragonlink... :P
Jul 03, 2012, 05:58 PM
Registered User
Someone, anyone!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Turnigy 9XC8-V2 Receivers For Turnigy/Flysky/Eurgle 9X TX Running V2 Firmware Skywalker14 Aircraft - General - Radio Equipment (FS/W) 4 Jan 06, 2015 09:37 PM
Sold FrySky 9X (er9x) w/DragonLink TX/RX(s) smileyz FPV Equipment (FS/W) 1 Jun 07, 2012 08:54 AM
Discussion Turnigy / Eurgle 9X TX $8 Li-Ion battery Modification Video bmsweb Radios 2 Aug 04, 2011 08:59 PM
Sold ER9x Eurgle 9x tx w/Frsky ACCST and 4rx panzerdivision Aircraft - General - Radio Equipment (FS/W) 1 Mar 31, 2011 09:09 AM
Help! Finding a 72Mhz TX Module for Turnigy/FlySky/Eurgle 9x transmitter penpen Radios 13 Oct 29, 2010 02:38 AM