Thread Tools
Old Jul 01, 2012, 09:16 PM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
Discussion

A small challenge: Can you in 1 hour or less..


Last week a friend of mine while talking joked I could most likely build a delta pretty fast, after it stuck in my mind.. how long would it take me?

Because I was using UHU por for it's durability there are 10 minute gap pauses which brought my total build time to about 60 minutes.

Below you can see my video, compressed into 3 minutes lol. The delta:

50CM span
33CM long
Turnigy 12A plush ESC + Turnigy 1650KV motor
2S Rhino 610mAh
2 * Turnigy 1440A servos
FrSky 4 channel fasst receiver
----
AUW - 120 grams

Not had weather to maiden her yet, but what can you build in an hour?

Give it a go I'm really interested too see

1 hour to RTF Depron deltawing from scratch (3 min 1 sec)
Sign up now
to remove ads between posts
Old Jul 02, 2012, 05:32 PM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
Maiden flight today, Had to improvise on the field, the tail was not big enough and flat spinned twice lol, I used a beer mat from inside the club shed I found to extend it, worked a charm

Delta depron wing - 1 hour build - Maiden flight (3 min 32 sec)
Old Jul 04, 2012, 02:57 AM
Zeeland is offline
Find More Posts by Zeeland
Registered User
Great Job
Old Jul 04, 2012, 11:39 AM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
Thank you

Version 2 is already being built, not a 1 hour thing but an improvement on the original design using some ideas and tricks of my own.

(Taking many photos step by step for building your own , creating project page and posting here this time)

A little preview below will show the crazy plans intended for it:
Old Jul 05, 2012, 10:50 PM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
I've finished version 2. I entirely wrote up the project build how-to. I will be releasing it on here as soon as I have my maiden video to put with it
Old Jul 06, 2012, 05:44 PM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
My projects on my site are HTML and I'm not converted it all to BBcode it'll take forever and a day. I've attached some images but the main project link can be found below with full step by step photo guide how I built version 2.

http://www.fatedev.com/index.php?p=1...0g+thrust+hehe

Depron Delta V2 700g thrust 185g AUW FAST! (5 min 15 sec)
Old Jul 11, 2012, 01:25 AM
Zeeland is offline
Find More Posts by Zeeland
Registered User
I shared your version 2 on Facebook also
Old Jul 11, 2012, 01:19 PM
stonerscolony is offline
Find More Posts by stonerscolony
Registered User
stonerscolony's Avatar
and all becomes clear, Hello FrSky

I made a comment on it, little joke hehe. It's true though on my sites a good 80% of RC projects involve FrSky RX and is shown in pictures, photos and if I remember (lol) I link products. Nice work, I'm looking to get a 6 channel FrSky for the next Delta


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion can you buy co-pilot cpd4 in the uk? alexsally Foamies (Kits) 2 Jul 03, 2012 03:31 AM
Discussion DJI multicopters 1 or 2 hours from Bristol? angelillogr United Kingdom 0 Mar 11, 2012 01:28 PM
Sold DA-170 w/2-Canister Mufflers with less than 10 Hours running time!!! unclegeorge Aircraft - Fuel - Engines and Accessories (FS/W) 0 Mar 04, 2012 05:54 PM
Question 1 oz. or less outrunners, what do you like? KenSt Power Systems 2 Dec 13, 2009 12:41 PM
Sold Neu 1515/1.5 Y/S TC less than 1 hour TT $ 175.00 Kenneth Henius Aircraft - Electric - Power Systems (FS/W) 1 Dec 12, 2009 03:26 PM