Thread Tools
Old Dec 04, 2012, 03:32 PM
Banjo5 is offline
Find More Posts by Banjo5
Registered User
Quote:
Originally Posted by Tw34k View Post
I have been reading page after page of this thread trying to find verification as to whether or not the 929 board with LED connectors will work with a 9X radio, from what I have read it will bind but I am still unable to find if the 5th channel is functional.

Can anyone please clear this up for me?
AFAIK nobody has cracked how to control the "5th" channel with a 9X. I think the latest speculations are that it's not done with a "regular" channel at all and is some funny "one off", but I haven't seen that this has been confirmed or denied either.

I'm waiting too.

cheers,
Andrew
Sign up now
to remove ads between posts
Old Dec 04, 2012, 08:21 PM
FyreSG is offline
Find More Posts by FyreSG
Vids: YouTube.com/FyreSG
FyreSG's Avatar
I found a Chinese thread that explains the steps to modify the transmitter to accepts 4 x AA batteries instead of 6. Check out the detailed photos.

http://bbs.mx3g.com/thread-320782-1-1.html
Old Dec 04, 2012, 08:28 PM
Tw34k is offline
Find More Posts by Tw34k
I = V/R
Tw34k's Avatar
Quote:
Originally Posted by Banjo5 View Post
AFAIK nobody has cracked how to control the "5th" channel with a 9X. I think the latest speculations are that it's not done with a "regular" channel at all and is some funny "one off", but I haven't seen that this has been confirmed or denied either.

I'm waiting too.

cheers,
Andrew
Bummer, Thank you for the information!
Old Dec 06, 2012, 01:36 AM
ArchillesElbow is offline
Find More Posts by ArchillesElbow
Registered User
flight plan for my next FPV v929 flight - just over 500m (NO LOS)...
hopefully i can do this today if there is no wind..
wish me luck
Old Dec 06, 2012, 03:07 AM
Soul Reaver is offline
Find More Posts by Soul Reaver
Registered User
good luck!
if you can record the video and share it... it would be nice.
Old Dec 06, 2012, 04:06 AM
ArchillesElbow is offline
Find More Posts by ArchillesElbow
Registered User
Quote:
Originally Posted by Soul Reaver View Post
good luck!
if you can record the video and share it... it would be nice.
I plan on recording the flight.. Or the part just before I loose the quad lol
Old Dec 06, 2012, 01:02 PM
ArchillesElbow is offline
Find More Posts by ArchillesElbow
Registered User
ok just came back from the flight... couldn't do the entire distance just did around 300meters round trip...it waa wIndy and I find when flying at speed, the camera was angled too much downwards. ..I'll post vids later..
one good thing is that I did a range test on the ground and got 250 meters solid video and rc
control...
Old Dec 06, 2012, 07:29 PM
bartricky is offline
Find More Posts by bartricky
Shelter Kitty "Orange Death"
bartricky's Avatar
Hi Y'all....

Jumping into the quad fray.
I ordered a V929 and when I told a flying buddy he also ordered one.
I'll let you know how a couple of old parkflyers make out with our first quads.
Old Dec 07, 2012, 07:02 AM
Makdaddy is offline
Find More Posts by Makdaddy
Doink-not again :)...aka Greg
Makdaddy's Avatar
Fixed my issue with my 929 wobble.
Found a crack on one of spines the blade/motor holders. Put in a new one. Took out a lot of the wobble but still did it occasionally.
I did order the GSW props - have not received them yet but was thinking "what the heck" lets put on a new set of OEM props. I only had maybe 15 flights on the old ones but they did have some scuffs from the repeated wobble crashes.
That did it, if flies great!. Did get a wobble after a couple of flips and was able to recover by reducing throttle slightly and it straightened out. Never was able to do that before.
Ran three batts with no problems. Will try again today if weather holds. Yea it is not a big deal but I was almost ready to put this on the shelf.
Old Dec 07, 2012, 03:48 PM
Daryoon is offline
Find More Posts by Daryoon
Team WarpSquad
Daryoon's Avatar
...
Last edited by Daryoon; Dec 07, 2012 at 04:42 PM.
Old Dec 07, 2012, 03:49 PM
Daryoon is offline
Find More Posts by Daryoon
Team WarpSquad
Daryoon's Avatar
Anybody tried the 500mAh from Value Hobby?

$2.99


http://www.valuehobby.com/blade-120-sr-lipo.html
Old Dec 07, 2012, 04:16 PM
Heli Pad is offline
Find More Posts by Heli Pad
Against Helicopter Cruelty
Heli Pad's Avatar
Haven't tried them. But then, all the other 120SR batteries I have, that I use for the V949, are rated for 25C and above. This one is rated at 12C (@500mAh). I wonder if it will have enough punch. Good price though if it works.
Old Dec 07, 2012, 05:25 PM
stonecutter is offline
Find More Posts by stonecutter
Sir Crashalot
stonecutter's Avatar
I had tried the G-Force 160 mAh for the 9958, they are fairly good when new (almost but not quite as punchy as the Turnigy, comparable to the nano-tech 160's), but faded sooner than either the nano's or turnigy's.

I'd guess we can probably expect similar performance from these (relative to Nano-tech 600's).
Last edited by stonecutter; Dec 08, 2012 at 12:34 PM.
Old Dec 07, 2012, 08:27 PM
thndr1mj is offline
Find More Posts by thndr1mj
Yeah, I can CRA$H that!
thndr1mj's Avatar
Quote:
Originally Posted by Daryoon View Post
Anybody tried the 500mAh from Value Hobby?

$2.99


http://www.valuehobby.com/blade-120-sr-lipo.html
I've got 8 of them, they work fine. They're slightly thinner than the stock battery so I wrapped them with strapping tape so they would fit snuggly. Getting 8-10 min flight times
Old Dec 08, 2012, 12:23 AM
thndr1mj is offline
Find More Posts by thndr1mj
Yeah, I can CRA$H that!
thndr1mj's Avatar
Does anyone know of a larger Quad than the V929 Beetle but just as stable at a reasonable price?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review WLToys Beetle quad review jameschen072 Mini Multirotors 5149 Oct 29, 2014 02:57 AM
New Product WLToys Ladybird Large BRF$30; RTF$39 lao Micro Helis 7 Jun 02, 2012 11:22 PM
ladybird beetle/gws easybug nebuchadnezzar Foamies (Kits) 1 Aug 14, 2004 09:48 AM