Thread Tools
Jun 27, 2012, 01:43 AM
I love to engineer & design!
Discussion

LadyBird Qr SMD Led's mod, even more led's to come!


Name: LadyBird Lights 3.jpg
Views: 259
Size: 178.6 KB
Description: Name: LadyBird Lights 2.jpg
Views: 235
Size: 145.3 KB
Description: Name: LadyBird Lights 1.jpg
Views: 244
Size: 223.3 KB
Description:

This is a recent mod I have done on my LadyBird Qr. I have lots more Led's on the way and should have some videos soon too. I just need some one to hold the camera. haha
Sign up now
to remove ads between posts
Jun 27, 2012, 01:48 AM
Fly,crash,glue,repeat!
Jake Bullit's Avatar
I`m looking to put lights on my MCX/Ladybird hybrid.

Subcribed
Jun 27, 2012, 01:49 AM
Registered User
Hi
Great. Please make a tutorial. How did you do this? where do you buy the leds?

Thank's

Andy
Jun 27, 2012, 09:15 PM
I love to engineer & design!
Sounds like it will be cool Jake, you have any pictures? Andy, I bought my led's on ebay. Here are some better pictures of the setup i've created. This is as close to as a tutorial as I will likely do for now
I used shrink tubing, magnet wire, green and blue smd leds and a resister (but i at least need to add one more).
Name: Ladybird LED setup 1.jpg
Views: 810
Size: 214.9 KB
Description:
I ran the blue and green smd's on separate circuits to maintain brighter lighting on all Led's. I used all three pins on the bind plug, using original plug w/ cut loop & adding an individual wired pin from another connector i bought. the three wires operate both of the led circuits, while sharing the middle positive (+) wire. (the red wire is actually a ground wire (-) , used red wire only bc i accidentally damaged the other black wire during this process)
Name: Ladybird LED setup 2.jpg
Views: 762
Size: 222.7 KB
Description:
Jul 02, 2012, 09:30 PM
I love to engineer & design!

I Need some ideas/ thoughts on my project


Quote:
Originally Posted by croyal918
Sounds like it will be cool Jake, you have any pictures? Andy, I bought my led's on ebay. Here are some better pictures of the setup i've created. This is as close to as a tutorial as I will likely do for now
I used shrink tubing, magnet wire, green and blue smd leds and a resister (but i at least need to add one more).
Attachment 4970592
I ran the blue and green smd's on separate circuits to maintain brighter lighting on all Led's. I used all three pins on the bind plug, using original plug w/ cut loop & adding an individual wired pin from another connector i bought. the three wires operate both of the led circuits, while sharing the middle positive (+) wire. (the red wire is actually a ground wire (-) , used red wire only bc i accidentally damaged the other black wire during this process)
Attachment 4970593
Where would be the best places to add the different colors. I will have plenty more white green and blue led lights very soon. I am definitely adding more on the legs, including a four instead of the two i have done now. I'm considering doing complete 360 degrees around canopy base. But what colors and where??? Help me pic the best arrangement....
Nov 20, 2012, 10:25 AM
Registered User
Hi. Where did you buy the leds and what kind it is
Jan 13, 2014, 07:15 PM
Registered User
Thanks! I want to do a laser thing on it the laser runs on 3v and 300ma
With a 3.6v 350mah battery would it be possible to fly with the laser sharing the battery connected to the receiver.? Please please help!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Walkera QR Ladybird ScarFace_ Mini Multirotor Drones 1786 Jan 21, 2017 10:14 PM
Mini-Review Walkera QR Ladybird Review - Pictures, Video, Flight Times, and Thrust Tom Z Mini Multirotor Drones 985 Dec 26, 2016 04:43 PM
Discussion Blade MQX or Walkera QR Ladybird. RaymondM Multirotor Drone Talk 2 Jun 27, 2012 10:10 AM
Discussion Even easier LED mod..... no show and 2 LEDs! Ironbowser Micro Ready-to-Fly 4 Sep 02, 2008 06:42 PM