Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 13, 2012, 10:48 PM
bdboy007 is offline
Find More Posts by bdboy007
Registered User
bdboy007's Avatar
and we could have 30 planes hanging on the wall and ceiling and still have to have another
Sign up now
to remove ads between posts
Old Jul 15, 2012, 10:46 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
I admit I have a serious addiction to building planes! I like building as much as I like flying. I have better control these days and I stopped stockpiling kits. I buy a kit and sell off one that has been flown in a long while
Old Jul 22, 2012, 10:49 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
three more flights today on the slipstream yak55m.... I swapped out the stock LG for a used/repaired CF GraphTech set... this worked great today.

I'm liking the Yak... with the DLE30 the power to weight ratio is spot on with unlimited vertical and power for 3D manuavers.

Flyracer
Old Jul 23, 2012, 01:52 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
I'm so glad she is working out for you.
It sure would be nice if you had a video.
Old Jul 23, 2012, 11:15 PM
bdboy007 is offline
Find More Posts by bdboy007
Registered User
bdboy007's Avatar
I had 5 flights Saturday on the sbach seems I'm more aware of the gear and grease the landings more
Old Jul 23, 2012, 11:48 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
Quote:
Originally Posted by kerwin50 View Post
I'm so glad she is working out for you.
It sure would be nice if you had a video.
yea yea... I need to post some evidence to back up my flight reports

I'll get a camera prepped and added to my flight bag... I don't like flying alone so there's usually someone on the flight line spotting for me... they can earn their place by catching some video!

Flyracer.
Old Jul 23, 2012, 11:54 PM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
O I don't need proof. I just like watching them LOL
Old Jul 24, 2012, 12:46 AM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
I did have one OHOH moment Sunday... on the 2nd flight I was trying to transition the airframe from a flat spin to a rolling harrier.. I got lazy with the throttle and there wasn't enough air over the wings, she rotated hard and went nose down fast. And it didn't help that she was a bit further out from the flight line then I normally fly. Fortunately I was high enough to get her out of the stall....

Flyracer
Old Jul 24, 2012, 08:23 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
Any damage
Old Jul 24, 2012, 09:24 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
no damage... I was up high enough to gain control and get her back to flying straight. But I rated the pucker factor a 10

I've been flying my 3DHS 71" Slick and I think this tends to make me lazy. The Slick is soooo forgiving even in a complete stall.

Flyracer
Old Jul 24, 2012, 09:31 PM
bdboy007 is offline
Find More Posts by bdboy007
Registered User
bdboy007's Avatar
Quote:
Originally Posted by flyracer View Post
no damage... I was up high enough to gain control and get her back to flying straight. But I rated the pucker factor a 10

I've been flying my 3DHS 71" Slick and I think this tends to make me lazy. The Slick is soooo forgiving even in a complete stall.

Flyracer
lol a new saying for the flying field, my last was when I missed our 100 foot by 2000 foot runway and a guy asked what the hell was that and I just said LOFT
Lack Of F%^*ing Talent LOFT bacame the field saying
Old Jul 24, 2012, 10:07 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
I like that! LOFT
Old Jul 25, 2012, 12:10 AM
kerwin50 is offline
Find More Posts by kerwin50
Registered User
kerwin50's Avatar
Lol
Old Jul 26, 2012, 11:00 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
Here's a pic of the color modification I made for the underside of the Yak's wings.The stock silver/white color scheme just doesn't work for me. I typically like broad dark stripes or checkerboard on the underside. I added black stripes inside the silver stripes... I get much better orientation this way.

Flyracer
Old Jul 27, 2012, 09:11 PM
flyracer is offline
Find More Posts by flyracer
Wannabe 3D Pilot
flyracer's Avatar
some more pics of the throttle position and layout of electrics.

going out tomorrow morning to put the Yak in the air. Gonna charge the camera tonight


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Slipstream 30cc Sbach DLE 30 $600 LPU only bdboy007 Aircraft - Fuel - Airplanes (FS/W) 12 Jun 13, 2012 12:39 AM
Build Log New Slipstream aircraft. The MXS 30cc and the SBACH 342 30cc cryhavoc38 Glow to Electric Conversions 12 Feb 06, 2012 10:52 PM
Sold Goldwing rc Yak55M 30cc version 3 ibcinyourc.com Aircraft - Fuel - Airplanes (FS/W) 0 Aug 03, 2011 01:32 PM
Discussion Goldwing 30cc Yak55M/V3 Hunkus Glow to Electric Conversions 3 Feb 21, 2011 10:38 AM