Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 26, 2012, 06:44 PM
Closed Account
Help!

looking for any info, feedback, and or advice about eg aircraft 30cc mxsr. plz


I've searched the web everywhere on a build or simply just any information about the eg aircraft 30cc. Something tells me i should have gotten a 3dhs plane because information about it is abundant. My main problem is knowing the proper CG. The manual states to start at wing tube. I text tony from redaero and he says the same thing i guess that's it. Its just that its highly unlikely the wing tube is where the proper CG is located. Another problem is i don't understand the mac formula. If anyone out there has any info about this model I'm listening plzz.
Sign up now
to remove ads between posts
Jun 26, 2012, 11:11 PM
12th Man
cryhavoc38's Avatar
most EG planes have the CG right in the middle of the wing tube.
you can use the width of the tube as your forward and aft CG.

Tony told you where the CG is, and he should know.

I myself have built and flown 7 or 8 EG planes ranging from several 50cc's, a couple 100cc and my 42% EG Raven.

Start with your CG in the middle of the tube, and fly. Adjust the CG according to how you want to fly.
Jun 27, 2012, 07:11 AM
Closed Account
Beautiful! Thank you. Yes i used the wing tube as cg reference. Again thank you. Yes I'm pretty sure tony knowa what's up. Hes actually the first person i met at rchawks. He can fly.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Idea about people not leaving feedback Garrett1234567 Trader Talk 4 Jun 13, 2012 09:45 PM
Discussion can you recommend me a good tail wheel set for 30cc mxsr? out of stock Electric Plane Talk 0 Jun 13, 2012 05:05 PM
Discussion SBach 30 or 50cc - FPV 120km project.. advice plz chrisfarru 3D / Fun Fly Fuel Planes 1 May 01, 2012 07:46 PM
Discussion Eg aircraft Mx2 or slick Wildhare540 3D Flying 0 Mar 02, 2012 11:43 AM
Any GWS Mini-Max advice or feedback? deeman Parkflyers 2 Jun 15, 2004 01:36 PM