Flymentor 3D & Multirotors? - RC Groups
Thread Tools
Jun 24, 2012, 05:21 PM
F550 Hex, Blade mQX
Discussion

Flymentor 3D & Multirotors?


Will the Flymentor 3D from Hobbyking work with a Tri/Quad/Hex?

If so, how would one go about hooking it up to the Rx/Multicopter Board?
Sign up now
to remove ads between posts
Jun 24, 2012, 06:02 PM
AMA 46133
Quote:
Originally Posted by Bearsa LLC
Will the Flymentor 3D from Hobbyking work with a Tri/Quad/Hex?

If so, how would one go about hooking it up to the Rx/Multicopter Board?
It will work in conjunction with a KK board but not really good by itself.
Oct 01, 2012, 08:35 AM
Registered User

flymentor + kk board


Does anybody has a nice (clear and understandable) HOW TO mount/connect every wires from Flymentor 3D and a KKBoard flashed with v2.5. A setup of the radio is also suitable. By the way, how good is the benefits of adding a flymentor. Thank you - Thierry BE
Oct 02, 2012, 09:00 AM
Suspended Account
Quote:
Originally Posted by betibeau
Does anybody has a nice (clear and understandable) HOW TO mount/connect every wires from Flymentor 3D and a KKBoard flashed with v2.5. A setup of the radio is also suitable. By the way, how good is the benefits of adding a flymentor. Thank you - Thierry BE
i do in my head but no point in sharing it here, i was the 1st person to crack building multi rotors with a helicommand 3d and gyros

i also went on to do the same with flymentors and gyros and both hc3d and fm3d with kk boards

conclusion?

helicommand 3d works great!

flymentor 3d will just frustrate you as you constanyly chase settings

i know more about this kind of setup than ANYONE ELSE who is ever going to post here!

Quadcopter N-DROID PHEONIX ELG tests and fine tuning complete perfection achieved N3M1S1S (6 min 53 sec)
Oct 03, 2012, 02:23 AM
Registered User
Hi NeoBot, Nice video.... Could you provide us a shortcut or a document or any support to help us to connect and setup parameters of the Flymentor 3D and eventualy the corresponding radio setup. Thank you in advance for your cooperation - b rgds - Thierry
Oct 03, 2012, 02:26 AM
Registered User
here is the only (more or less) valuable info I have found so far. It seems to work great with a GAUI 330X. Thierry
Gaui 330X Quad with FLYMENTOR 3D ...Working !! (10 min 57 sec)
Apr 16, 2013, 03:56 PM
Registered User
Hi guys.

I have lost the usb interface.
It is posible to setup the Flymentor from zero


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flymentor 3D configuration for Tricopter sleper UAV - Unmanned Aerial Vehicles 3 Apr 16, 2013 03:59 PM
Sold KDS Flymentor 3D juneebear Aircraft - Electric - Helis (FS/W) 1 Apr 11, 2012 09:28 PM
Sold KDS Flymentor 3D juneebear Aircraft - General - Radio Equipment (FS/W) 0 Apr 11, 2012 06:02 PM
Sold KDS Flymentor 3D ROKJR56 Aircraft - Electric - Helis (FS/W) 3 Apr 11, 2012 08:20 AM
Discussion flymentor on multirotor bigbro3760 Multirotor Drone Talk 7 Oct 22, 2011 04:10 PM