Thread Tools
Old Oct 29, 2013, 05:44 PM
SC1 is offline
SC1
Find More Posts by SC1
SC1
Registered User
Okay, I'm getting that the Solius is a higher-quality model. It would just about have to be...

Anyone have the Rx-R version? That's what I would get, as I assume the supplied power system is adequate for sport flying? I can acquire proper batteries; I have some 3S 2100s, but they may be too long for the battery compartment.

I'm really less than thrilled with foam models in general; my traditional-construction (balsa, ply, film covering) electric models fly rings around every foamie I've handled. I have been contemplating the H9 Mystique for this exact reason. With that twisted empennage, my Calypso flies... And that's about all you can say good about it.

.
Sign up now
to remove ads between posts
Old Oct 29, 2013, 05:47 PM
ombudsman is online now
Find More Posts by ombudsman
Registered User

Uhh...


I thought this thread was about the Calypso.
Old Oct 29, 2013, 07:04 PM
SkyCadet is offline
Find More Posts by SkyCadet
Segelfliegen bedeutet Freiheit
SkyCadet's Avatar
Quote:
Originally Posted by SC1 View Post
Okay, I'm getting that the Solius is a higher-quality model. It would just about have to be...

Anyone have the Rx-R version? That's what I would get, as I assume the supplied power system is adequate for sport flying? I can acquire proper batteries; I have some 3S 2100s, but they may be too long for the battery compartment.

I'm really less than thrilled with foam models in general; my traditional-construction (balsa, ply, film covering) electric models fly rings around every foamie I've handled. I have been contemplating the H9 Mystique for this exact reason. With that twisted empennage, my Calypso flies... And that's about all you can say good about it.

.
I got the RxR version and I decided to change the Calypso's power system to a slightly beefier one, that could turn a 11x7 prop. WRT the Solius, the KIT form is sans motor, servos, etc., airframe only. FYI. The RTF Solius version is setup to fly sport gliding.

SkyCadet
RCG Plus Member
Latest blog entry: New plane - Evader!!!
Old Oct 30, 2013, 09:24 AM
SC1 is offline
SC1
Find More Posts by SC1
SC1
Registered User
Quote:
Originally Posted by ombudsman View Post
I thought this thread was about the Calypso.

It is. It is also about comparing the Calypso to other, similar offerings.

.
Old Nov 04, 2013, 08:10 PM
cjoregon is offline
Find More Posts by cjoregon
Registered User

Elevator throttle mix/balance point etc.


Am setting up new Calypso with flaps, how far did you end up lowering the flaps for crow/butterfly?

What elevator to throttle mix do you guys use to nullify the pitch up when using full throttle?

Directions say the balance point should be 1/4 inch forward of the spar, the photo seemed to show the little carbon fiber wing stiffener and not the large hollow main wing spar? Am I correct the cg should be 1/4" forward of this wing stiffener? Where did your Calypso finally balance out?

I wound up with about 160 watts, that about average?

I'm very happy with the quality and value I've found so far!
Old Nov 07, 2013, 04:00 PM
WA Flyer is offline
Find More Posts by WA Flyer
Registered User

Calypso FTZA3000


Nice review you made.
I'm not real impressed with this glider other that it comes out of the box and assembles quick to fly. Guess I'm spoiled with the build yourself models.
1. It is nose heavy, I suppose for beginner stall characteristics.
2. Only 3 flights and the charger doesn't work any longer. Now it's grounded.
3. Pretty nice flyer but elevator difficult to trim out because of the heavy nose. Requires constant stick pressure. I've moved everything aft as far as possible.
Q. Does anyone know of a decent after market charger that actually works??

Thanks much
Old Nov 08, 2013, 09:24 AM
hendrnk is online now
Find More Posts by hendrnk
An Aussie in Chicago
Quote:
Originally Posted by WA Flyer View Post
Nice review you made.
I'm not real impressed with this glider other that it comes out of the box and assembles quick to fly. Guess I'm spoiled with the build yourself models.
1. It is nose heavy, I suppose for beginner stall characteristics.
2. Only 3 flights and the charger doesn't work any longer. Now it's grounded.
3. Pretty nice flyer but elevator difficult to trim out because of the heavy nose. Requires constant stick pressure. I've moved everything aft as far as possible.
Q. Does anyone know of a decent after market charger that actually works??

Thanks much
http://www.hobbyking.com/hobbyking/s...idProduct=7028
Old Nov 08, 2013, 12:04 PM
StarHopper44 is offline
Find More Posts by StarHopper44
Earthbound Skyhound
StarHopper44's Avatar
Quote:
Originally Posted by WA Flyer View Post
...a decent after market charger that actually works??

Thanks much
Accucel6 is a peach! Be aware you'll need a separate power supply for it. A made-for-computer-type that puts out ~15VDC in the 5-7Amp range (~$15 on Amazon) is what I use, but this purt' much restricts you to charging one LiPo at a time. Also, one of these [Plug-King] sets should prove invaluable in the long run. It has everything I've ever encountered except the new XT90 plugs for heavy Amp apps, which charger plugs are available separately.
RCG Plus Member
Old Nov 08, 2013, 01:49 PM
hendrnk is online now
Find More Posts by hendrnk
An Aussie in Chicago
Quote:
Originally Posted by StarHopper44 View Post
Accucel6 is a peach! Be aware you'll need a separate power supply for it. A made-for-computer-type that puts out ~15VDC in the 5-7Amp range (~$15 on Amazon) is what I use, but this purt' much restricts you to charging one LiPo at a time. Also, one of these [Plug-King] sets should prove invaluable in the long run. It has everything I've ever encountered except the new XT90 plugs for heavy Amp apps, which charger plugs are available separately.
Or this from HK. http://www.hobbyking.com/hobbyking/s...arehouse_.html
Old Nov 08, 2013, 09:36 PM
Westranm is offline
Find More Posts by Westranm
Registered User
Westranm's Avatar
Quote:
Originally Posted by WA Flyer View Post
Nice review you made.
I'm not real impressed with this glider other that it comes out of the box and assembles quick to fly. Guess I'm spoiled with the build yourself models.
1. It is nose heavy, I suppose for beginner stall characteristics.
2. Only 3 flights and the charger doesn't work any longer. Now it's grounded.
3. Pretty nice flyer but elevator difficult to trim out because of the heavy nose. Requires constant stick pressure. I've moved everything aft as far as possible.
Q. Does anyone know of a decent after market charger that actually works??

Thanks much
If you are using the recommended battery, you should be able to balance the plane properly so it is not nose heavy.

Did you check the CG? Otherwise, the elevator pressure required for level flight may be due to the improper incidence of the rear stab to the wing. Earlier versions of this plane are known to have this issue as you will see earlier in this thread.

-Randy
Old Dec 01, 2013, 10:19 PM
AlphaDeltaTango is offline
Find More Posts by AlphaDeltaTango
Emergency landing expert

A recent Calypso flight


Avon Reservoir (2 min 15 sec)


Andy
Old Dec 01, 2013, 10:27 PM
race58 is offline
Find More Posts by race58
Registered User
race58's Avatar
Nice!!!!
Old Dec 02, 2013, 01:33 AM
ripacheco is offline
Find More Posts by ripacheco
rip
ripacheco's Avatar
Participated in a Gliders competition this weekend...
This is what the CD wrote on the results:

"Robert [...] took pictures, and flew his Calypso electric sailplane. He flew well and was just 10 seconds short of a max in the third round. The Calypso is a good machine and Robert did a good job with it"

After the contest Today I was flying with two pure-gliders circling a thermal... i beat them both in altitude and my altimeter registered 1100 ft above the ground !!!

Getting serious little by little... that glider is amazing
Last edited by ripacheco; Dec 02, 2013 at 02:00 AM.
Old Dec 03, 2013, 07:02 AM
StarHopper44 is offline
Find More Posts by StarHopper44
Earthbound Skyhound
StarHopper44's Avatar
Re your caption on 1st pic, "...have an altimeter/vario on it..." I thought varios were not permitted. AMA rules, to wit:
5. Any device for the transmission of information from the model aircraft to the pilot or timer/helper which would assist the pilot in finding, locating or centering on thermal or slope lift is prohibited.
???
RCG Plus Member
Old Dec 03, 2013, 08:43 AM
ripacheco is offline
Find More Posts by ripacheco
rip
ripacheco's Avatar
Quote:
Originally Posted by StarHopper44 View Post
Re your caption on 1st pic, "...have an altimeter/vario on it..." I thought varios were not permitted. AMA rules, to wit:
5. Any device for the transmission of information from the model aircraft to the pilot or timer/helper which would assist the pilot in finding, locating or centering on thermal or slope lift is prohibited.
???
You are right. We use my telemetry to tell when to turn the power off not to tell if glider is climbing or descending. I could use a specialized device to accomplish the same but since this is not an AMA sanctioned event I'm allowed to use the limited telemetry for that purpose only. Which means the vario is disabled during the contest. The TX beeps when I reach 200m Or the motor is ran for 30 secs


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flyzone Calypso george@dream-flight Electric Sailplanes 138 Oct 02, 2016 10:47 PM
For Sale Flyzone cessna 182 ep rtf 2.4 radio mike robson Aircraft - Electric - Airplanes (FS/W) 3 Apr 07, 2012 09:23 PM
Discussion How to set up and trim an EP glider JJ460 Electric Sailplanes 2 Mar 24, 2012 09:27 PM
Wanted Wanted, Electric flightnose cone for Calypso contest F3B glider graham johnson Aircraft - Electric - Airplanes (FS/W) 0 Dec 06, 2008 05:35 PM