Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jun 22, 2012, 08:35 PM
Kmot is online now
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Cool

Do you draw your own circuits by hand?


Would you like them to be 'pro' looking?

This is a very cool, and free, website that helps make circuit drawings. Check it out!

https://www.circuitlab.com/
Sign up now
to remove ads between posts
Old Jun 22, 2012, 10:40 PM
Apismelifera is offline
Find More Posts by Apismelifera
1/2 a bubble off
Apismelifera's Avatar
I have been using the schematic portion of ExpressPCB.com for years to draw my schematics.


http://www.expresspcb.com
Old Jun 22, 2012, 11:03 PM
MILLERTIME is offline
Find More Posts by MILLERTIME
Taking care of the pond.
MILLERTIME's Avatar
Cool.
Old Jun 22, 2012, 11:49 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
I also use ExpressPCB, both to make the schematics and PCB artwork. Easy to learn. Easy to make your own components and add to the library.
Old Jun 23, 2012, 02:08 AM
Kmot is online now
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
Oh yeah, that is cool thanks!
Old Jun 23, 2012, 07:29 AM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
I draw everything by hand. I used to be a draftsman years ago and really find hand drawing relaxing. Slow as it is, I like it.
Old Jun 23, 2012, 11:20 PM
green-boat is offline
Find More Posts by green-boat
Boats on the brain!!
green-boat's Avatar
They're drawn in my head.
Old Jun 24, 2012, 02:12 PM
Steve Bad is offline
Find More Posts by Steve Bad
"Take the Cannollis"
Steve Bad's Avatar
It's all spaghetti to me!
Old Jun 24, 2012, 07:19 PM
steamboatmodel is offline
Find More Posts by steamboatmodel
Registered User
steamboatmodel's Avatar
I was doing a drawing with pencil and paper out in the yard last year, I was ca;;ed away to the phone and put my eyeglasses down on the board. I now get kidded that even doing electronic circuits on paper I can let the magic smoke out.
Regards,
Gerald.
Old Jun 24, 2012, 09:29 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
If you draw your circuit board layout by hand or with a program, you will need to etch the board. I did a thread a while ago on how to etch circuit boards. If it's any use to those trying to create a board, here is the thread. There is a PDF file in the first post, that explains how to do it.

https://www.rcgroups.com/forums/show....php?t=1360740
Old Jun 25, 2012, 10:41 AM
steamboatmodel is offline
Find More Posts by steamboatmodel
Registered User
steamboatmodel's Avatar
Quote:
Originally Posted by ken_nj View Post
If you draw your circuit board layout by hand or with a program, you will need to etch the board. I did a thread a while ago on how to etch circuit boards. If it's any use to those trying to create a board, here is the thread. There is a PDF file in the first post, that explains how to do it.

https://www.rcgroups.com/forums/show....php?t=1360740
I had copied your PDF a while back haven't got around to making a board yet. I am reading a book on robotic (Arduino Robotics) and they have a chapter on making Circuit boards. They say that as an alternative to ferric acid you can use 2 parts Hydrogen Peroxide + 1 part Muriatic acid as an etchant solution. Another thing they use is glossy magazine paper as a toner transfer medium. They give a bit of a tutorial on using Eagle from CadSoft freeware version max 4" X 3.2" board.
Regards,
Gerald.
Old Jun 25, 2012, 11:04 AM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
I gave glossy magazine paper a try back then. It did not work to well for me that's why I went to the overhead transparency. Some of this is hit or miss and figure out what works best. Ferric Chloride is still available in the Radio Shack by me so I have my supply. Some places online sell it in powder form. You need to be very careful with any of these chemicals. I ruined a pair of jeans getting some FC on them, it just stained them. Muriatic Acid is just plain nasty.

I also have an Arduino and eventually have plans to control lights while a boat is on display. Basically use it to control lights going on and off in a timed sequence. I'll have to build a add-on board with relays to plug into the Arduino for this. And it will give me practice writing the code. Looking forward to doing this.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Do you repair your helis? hereathome Beginner Training Area (Heli-Electric) 12 Jun 26, 2012 02:03 PM
Discussion Dymond D47 servo, Which version do you have on hand, how can you tell??? TDboy Hand Launch 5 Apr 21, 2012 03:26 AM
Question Where do you get your trim designs and how do you test them? dedStik The Builders Workshop 16 Mar 15, 2012 04:32 PM
How do you do print-your-own decals LawrenceHare Scale Kit/Scratch Built 86 Mar 03, 2007 07:57 PM