Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jul 03, 2012, 07:55 PM
bcollydas is offline
Find More Posts by bcollydas
Registered User
bcollydas's Avatar
By reducing the time for switching does this mean that the timming of the motor would be lower?

Can we bypass those esc's and replace them with our own?
RCG Plus Member
Sign up now
to remove ads between posts
Old Jul 03, 2012, 09:11 PM
flytahiti is online now
Find More Posts by flytahiti
Registered User
flytahiti's Avatar
Quote:
Originally Posted by skivvie View Post
You need to desolder 7 wires to get the ESC out of the arm, then remove 6 surface mount resistors, then bridge the pads where the resistors were, then solder 7 wires back to the ESC to reinstall to the arm. Look at the PDF, it's clearly laid out.
yes you are right 7 wire for removing esc then 12 unsoldering for resistor and the same for resolder lfor each arm so it's a total of 228 for the 6 arms !!!!!!!!!!!
more over you have to know that resistors are about 1 mm small !!!!!!
i think DJI are jocking when they ask customers to do it by themselves.
If you look close to solders you can see that they are square so it have been done
by robots ,we are not robots !!!!!
and it's not finish , if you fail to do it yourself then you can ship to them and they will do the mod on yours. they won't send the new version.

i think DJI is making fun of us and they are destroying their reputation
Old Jul 03, 2012, 09:38 PM
flytahiti is online now
Find More Posts by flytahiti
Registered User
flytahiti's Avatar
new info from DJI about arms and plugs!!!!!!!
Old Jul 03, 2012, 09:45 PM
jetbootz is online now
Find More Posts by jetbootz
Registered User
jetbootz's Avatar
P.R disaster after P.R disaster after P.R disaster.....

Please can I have arms that are made of something stiff?
Old Jul 03, 2012, 09:47 PM
Photoship One is offline
Find More Posts by Photoship One
by Alary Design
Photoship One's Avatar
Quote:
By reducing the time for switching does this mean that the timming of the motor would be lower?
No. motor timing is something else all together. These resistors (or lack of in this case) would not affect that.
Old Jul 04, 2012, 02:39 AM
shdwkeeper is offline
Find More Posts by shdwkeeper
Registered User
Quote:
Originally Posted by flytahiti View Post
new info from DJI about arms and plugs!!!!!!!
I have this in the first post of this thread
Old Jul 04, 2012, 02:53 AM
flytahiti is online now
Find More Posts by flytahiti
Registered User
flytahiti's Avatar
yes but it add some info about arms connections .
Old Jul 04, 2012, 03:05 AM
semich is offline
Find More Posts by semich
Registered User

Data Link 2,4


Quote:
Originally Posted by BorisSA View Post
Is one of you using the Z15 in combo with the 2.4ghz data link ? Its seems to me and mentioned by two users in another forum that there are not enough can.bus ports to have both running on the same time.

With the 900 mhz link it should work since it has two can bus ports !

Can someone confirm this.
I'm using it, no problem at all... S800 + wookong + data link 2,4. Zenmuse on the way.
Old Jul 04, 2012, 03:11 AM
semich is offline
Find More Posts by semich
Registered User

Getting shipped


Quote:
Originally Posted by Spyde View Post
I whish we could get som info on that battery tray, like when they will ship! Becouse the s800 really needs one
I asked about that to DJI, they are sending it to the S800 owners - free.
Old Jul 04, 2012, 03:28 AM
semich is offline
Find More Posts by semich
Registered User

Did it my self with an experienced friend (electonic guy) and BOOM!


I would advice you to return to DJI to be fix. After spending a few hours changing the resistances, it looked quiet well... When I turn it on, one engine didn't start and after a few seconds, something exploded.

DJI is now aware. Awaiting instructions.

Photos:
https://www.dropbox.com/sh/779k8pj2k1t1hw8/c66lVYpgQM?m
Old Jul 04, 2012, 03:31 AM
shdwkeeper is offline
Find More Posts by shdwkeeper
Registered User
Quote:
Originally Posted by flytahiti View Post
yes but it add some info about arms connections .
Look at the first post of this thread with the attachments and tell me how its different
Old Jul 04, 2012, 03:33 AM
shdwkeeper is offline
Find More Posts by shdwkeeper
Registered User
Quote:
Originally Posted by semich View Post
I would advice you to return to DJI to be fix. After spending a few hours changing the resistances, it looked quiet well... When I turn it on, one engine didn't start and after a few seconds, something exploded.

DJI is now aware. Awaiting instructions.

Photos:
https://www.dropbox.com/sh/779k8pj2k1t1hw8/c66lVYpgQM?m
This is why you probably should choose Option #3 out of the 3 options they suggested.
Old Jul 04, 2012, 03:34 AM
semich is offline
Find More Posts by semich
Registered User
This is what I'm saying...
Old Jul 04, 2012, 03:46 AM
sap_2000 is offline
Find More Posts by sap_2000
Artic jetflyer
sap_2000's Avatar
Quote:
Originally Posted by jetbootz View Post
P.R disaster after P.R disaster after P.R disaster.....
Please can I have arms that are made of something stiff?
Quote:
Originally Posted by flytahiti View Post
i think DJI is making fun of us and they are destroying their reputation
Agreed.

I don't want a random guy working at my dealer solder those tiny spots that was originally soldered by robots.

I want new ESC's. Thats the bottom line!
Old Jul 04, 2012, 05:07 AM
Topper_MUC is offline
Find More Posts by Topper_MUC
Registered User
Quote:
Originally Posted by semich View Post
I'm using it, no problem at all... S800 + wookong + data link 2,4. Zenmuse on the way.
When your Zenmuse arrives you will find out that you have no free CanBUS port to connect it until you disconnect your 2.4 Ghz Data Link or either build a Y-Adapter on your own


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion My DJI Spreading Wings S800 just came in the mail and I think I'm in trouble jasper7821 Multirotor Talk 219 Oct 16, 2012 06:11 PM
New Product DJI Spreading Wings S-800 Hexa multi-rotor sidneyw Multirotor Talk 930 Jun 22, 2012 11:14 AM
Discussion DJI Spread Wings S800 and Zenmuse Z15 prices are out! tpnitro Multirotor Talk 120 Jun 19, 2012 02:27 AM
Discussion DJI S800 Spreading Wings has landed at Quadcopters UK Headquarters QuadcoptersUk Multirotor Talk 8 May 14, 2012 02:27 PM
Discussion Dji Spreading Wings (S800) coming Huluhulu Multirotor Talk 7 Apr 27, 2012 04:11 AM