Pulsar 3.6M busted wing - RC Groups
Thread Tools
This thread is privately moderated by jwjenks, who may elect to delete unwanted replies.
Jun 22, 2012, 12:59 PM
Trader Rating: 6
Registered User
Sold

Pulsar 3.6M busted wing


Anyone interested in a busted Pulsar wing.
Leading edge dented and TE flap busted wide open from encounter with trees.
A Spectrum 4010 Servo locked up and disabled the Rx at 500'
You might be able to fill in the LE of the tips and TE of the center section.
Spar solid and 4 servo covers.
OBO by Monday Night.
John
Sign up now
to remove ads between posts
Jun 22, 2012, 01:53 PM
Trader Rating: 10
Registered User
I've fixed a similar wing (albeit not nearly as bad as this one) due to a midair in the past (luckily just 2 ribs). In the case of the center panel on my wing (no guarantee this one is the same), all of the ribs were the same, so all you need to do is remove a good rib and create copies, then cap the spars and re-cover the wing. Not sure the best method for fixing the leading edges...
Jun 22, 2012, 01:54 PM
Trader Rating: 82
Sure it'll work
Flyextreme's Avatar
Ouch!!!
Jun 22, 2012, 04:23 PM
Trader Rating: 87
Registered User
xrx1113's Avatar
pm'd
Jun 22, 2012, 08:40 PM
Trader Rating: 11
Everything is "only used once"
slope junkie's Avatar
If you're a builder that's an easy fix....And that is why I don't touch craptrum...Airtronics followed by Futaba rule my roost.
Jun 23, 2012, 11:31 PM
Trader Rating: 10
Registered User
What price please? I'm interested.


Ric

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Pulsar Pro 3.2E RES Ready to Fly(less receiver) $599 Shipped in ConUSA r/cmark Aircraft - Sailplanes (FS/W) 2 Jun 22, 2012 05:43 PM
Build Log 3.6m Duo Discus Keenan smith Scale Sailplanes 16 Mar 11, 2012 06:43 PM
Question Pulsar 3.6m & 4m flyb0y Sailplane Talk 4 May 12, 2010 02:26 AM
Discussion Pulsar 3600 ( 3.6m ) ?? branwell Electric Sailplanes 5 Nov 14, 2009 04:50 PM
FS: Amethyst 3.6m BUSTED wamdue Aircraft - Sailplanes (FS/W) 8 May 17, 2005 08:02 PM