Atomik Metal Mulisha MM450 with E-Gyro - Page 26 - RC Groups
Thread Tools
Aug 15, 2012, 06:11 PM
Registered User
Quote:
Originally Posted by JohnnyMc
I get it. Your insert mod has some interesting aspects to it with soft inner core but then the knobbies of the front tire inside up against the rear tire allows for extra soft cushion Im guessing. I wonder if your mod is just consistent softness or maybe it acts in a more progressive manor because of the front tire knobbies, and like you said, it conforms to hard edges better than foam does. Just trying to make sense of it. I hope to test it out sometime this year lol.

By the way, finally watched race at southwick - dangit Tomac had them, but wasnt patient around worst corner to be impatient on lol...so bummed on that comeback.
I think that could be a key as well as the foam. Give it a try. Might work for you.
That tree had it in for the Honda Boys all right. Tomac was coming all right. Bagget was lucky this time I think.
Sign up now
to remove ads between posts
Aug 15, 2012, 06:19 PM
Registered User
Quote:
Originally Posted by ATOMIKRC
Hello RCgroups forum members! This is Jeff Simon with the Venom/Atomik sales team. I just popped in to read some of the great comments coming from you guys concerning our new MM450 and thought I'd post to let you know that we're always around to help.

We're working hard to keep our presence on the forums around the internet, but we've been pretty busy since the launch of the bike and many of our other new Metal Mulisha products. I just wanted to make everyone aware that we are always willing to help out and answer questions through our customer service team. You can reach them via our toll free number listed on our web sites. If you need specific questions answered about our bikes or any other Venom/Atomik product, that is the best way to get in touch with us. Thanks again for all the positive feedback on the new bike and all your support! Venom's got your back!

Jeff Simon
Venom/Atomik International
Thanks Simon good to know. Bike is great fun thanks. have been trying to get Andy Bolton to pull his finger out and import these bikes into Australia as I could sell heaps of these every time I go out. Any idea whats happening there as he says he will keep me informed and have heard nothing. Meanwhile no sales. could look at importing them myself if he's not interested.
Aug 15, 2012, 06:35 PM
Registered User
Quote:
Originally Posted by chktm
Thanks Simon good to know. Bike is great fun thanks. have been trying to get Andy Bolton to pull his finger out and import these bikes into Australia as I could sell heaps of these every time I go out. Any idea whats happening there as he says he will keep me informed and have heard nothing. Meanwhile no sales. could look at importing them myself if he's not interested.
The North American offices received the entire first shipment of bikes. I know that Andy is working on bringing them in, but beyond that, I know very little. I wish I could tell you that I know more, but unfortunately the Australian office operates completely separate from the U.S. office, so I really don't know where they're at in terms of bringing them in to your area. Andy will be the best person to get that info from but if I hear anything at all I'll be sure to post it here!
Aug 15, 2012, 06:43 PM
RC Dirt Bike Action
JohnnyMc's Avatar
Atomik/Jeff, thanks for popping in to say hi. A lot of vmx owners are looking to purchase the upgrade egyro kit. Website has a 'late august' release, so is that still looking like good time? (Chris Nicastro would track the ship as it crosses over with his private submarine, then give us truck location as the boxes drive to your location. haha.)
Aug 15, 2012, 10:07 PM
Registered User
I want the e_gyro!!!!!
Aug 15, 2012, 10:13 PM
Registered User
I know the e-gyros will be here very soon. I'm planning on ordering 6 of them initially. I know there are lots out there with VMX's looking to upgrade!
Aug 16, 2012, 01:42 AM
Registered User
Quote:
Originally Posted by ATOMIKRC
The North American offices received the entire first shipment of bikes. I know that Andy is working on bringing them in, but beyond that, I know very little. I wish I could tell you that I know more, but unfortunately the Australian office operates completely separate from the U.S. office, so I really don't know where they're at in terms of bringing them in to your area. Andy will be the best person to get that info from but if I hear anything at all I'll be sure to post it here!
You guys hogged the first load eh. Ha ha . Thanks for letting me know. I'll tell anyone wanting one now to buy from USA. And when the next lot come from the factory I guess Andy will be in touch. Hopefully it's not too late to sell more. I'll just have to hide my bike for now. Lol.
Aug 16, 2012, 09:12 AM
Registered User
hey guys its been a while but im back on the forum again got some great footage to up load and loads to catch up in here still loving the mm450 its one solid bike i have rode it hard and it just keeps on going
Aug 16, 2012, 09:25 AM
Registered User
gurumods's Avatar
Quote:
Originally Posted by ATOMIKRC
Hello RCgroups forum members! This is Jeff Simon with the Venom/Atomik sales team. I just popped in to read some of the great comments coming from you guys concerning our new MM450 and thought I'd post to let you know that we're always around to help.

We're working hard to keep our presence on the forums around the internet, but we've been pretty busy since the launch of the bike and many of our other new Metal Mulisha products. I just wanted to make everyone aware that we are always willing to help out and answer questions through our customer service team. You can reach them via our toll free number listed on our web sites. If you need specific questions answered about our bikes or any other Venom/Atomik product, that is the best way to get in touch with us. Thanks again for all the positive feedback on the new bike and all your support! Venom's got your back!

Jeff Simon
Venom/Atomik International
Hi Jeff and welcome.Thanks for joining.I am a VMX owner saving and waiting for egyro conversion and a NEW VMM.I plan on the conversion first.
Is there any one particular "go to guy" that we should be asking for when we get stumped ?.Did you guys by any chance "clone " Chris before he left
Aug 16, 2012, 11:51 AM
Registered User
Quote:
Originally Posted by JohnnyMc
Atomik/Jeff, thanks for popping in to say hi. A lot of vmx owners are looking to purchase the upgrade egyro kit. Website has a 'late august' release, so is that still looking like good time? (Chris Nicastro would track the ship as it crosses over with his private submarine, then give us truck location as the boxes drive to your location. haha.)
Our system shows that the eGyro will be in stock the first week of September. I never trust those dates 100% due to shipping variations and customs clearance, but I think that's a pretty realistic time line. I can't wait for you VMX guys to get your hands on the eGyro! It's a game changing device!
Aug 16, 2012, 11:55 AM
Registered User
Quote:
Originally Posted by gurumods
Hi Jeff and welcome.Thanks for joining.I am a VMX owner saving and waiting for egyro conversion and a NEW VMM.I plan on the conversion first.
Is there any one particular "go to guy" that we should be asking for when we get stumped ?.Did you guys by any chance "clone " Chris before he left
Please feel free to pose your questions to me. I'll take them to my customer service team and we'll get you an answer. I do not claim to be any expert on the bike, but my customer service team has a wealth of knowledge and given some time to consult them, I'm sure I can get you guys an answer on most anything concerning the bike.
Aug 16, 2012, 12:49 PM
Closed Account
Quote:
Originally Posted by deen247
still loving the mm450 its one solid bike i have rode it hard and it just keeps on going
Ok Deen, thanks for rubbing it in! When are we organizing a dirt day?
Aug 16, 2012, 02:45 PM
Registered User
Quote:
Originally Posted by Jonathan Bradbury
Ok Deen, thanks for rubbing it in! When are we organizing a dirt day?
as soon as you want mate come and have a go of the mm450 see what you think of it
Aug 17, 2012, 06:01 AM
Registered User
Hey Deen... Good to see your back. I thought you were having too much fun to fix your Internet. Ha ha looking forward to some footage.
Aug 17, 2012, 03:05 PM
Pro to the Duce
maxxdout's Avatar
Not sure if this has been asked yet or not but does the e-gyro lessen run-times?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Nitro ARX with e-gyro conversion first test run Throttlejunkie Motorcycles 55 Aug 16, 2012 01:35 AM
Sold E-flite G210 mems Gyro rodneybarrett Aircraft - Electric - Helis (FS/W) 3 Jun 26, 2012 11:04 PM
Sold E-flite G110 gyros rodneybarrett Aircraft - Electric - Helis (FS/W) 2 Jun 24, 2012 06:29 PM
For Sale 3-channel Micro IR S107 Metal HoneyBee Helicopter No.ES0107 (with Gyro) mictopwin Aircraft - Electric - Batteries & Chargers (FS/W) 8 May 09, 2011 02:47 PM
Sold Gaui hurricane 550 with metal head, servos, gyro, esc, and batteries. - $350 shipped AllBread Aircraft - Electric - Helis (FS/W) 6 Apr 19, 2009 10:23 PM