Thread Tools
Old Jun 20, 2012, 06:13 PM
SpeedMaster is offline
Find More Posts by SpeedMaster
UAS Test Pilot
SpeedMaster's Avatar
If you read the first post in this thread, KK mention being able to set it in 0.1v increments... Maybe I misunderstood...?
Sign up now
to remove ads between posts
Old Jun 20, 2012, 06:15 PM
midelic is online now
Find More Posts by midelic
Registered User
midelic's Avatar
Quote:
Originally Posted by LazyZero View Post
There is only stated about acoustic signal when arm/disarm board.
Can't read anything about low bat alarm.

Christian
Read below in red color

Quote:
Originally Posted by kapteinkuk View Post
Hi all, I designed this one to be easy to use for the noobs, and still be better than the KK1.

The gadgets-freaks will not pitch a tent over this one, It is the same, tired old AVR-chip. (Sorry TC ) However, it runs on a 20MHz crystal, so output resolution and jitter is better than before.

Some improvements:

-No confusing potmeter directions.

-No gyro reversing needed since the FW is for a fixed HW setup.

-Self-leveling. It uses acc tilt-angle measurement. Later I will try to add a full AHRS algorithm like the big boys use since it is better. (less delay)

-No PC necessary. All adjustments and multicopter type selecting is done with the LCD and buttons.

-The transmitter setup can be checked before first test. (channels and direction)

-low drift gyros.

-graded low-voltage-alarm, adjustable in 0.1V increments.

-motor numbering and propeller direction is visible on the LCD.

-Custom mixer.


It will become open source when the first update is available. But beware, it is still written in Evil Assembly!!


Here is a buddycode, get it for $19:
http://www.hobbyking.com/buddy.asp?c...2-7C1628251969
Old Jun 20, 2012, 06:19 PM
LazyZero is offline
Find More Posts by LazyZero
Master of Flash
LazyZero's Avatar
Yes you are right. But where to attach?
Old Jun 20, 2012, 06:21 PM
midelic is online now
Find More Posts by midelic
Registered User
midelic's Avatar
The 2 pins for buzzer?I don't believe those 2 pins only for sound of arming/disarming the board.Somehow is a nonsense.
Last edited by midelic; Jun 20, 2012 at 06:27 PM.
Old Jun 20, 2012, 07:25 PM
msev is offline
Find More Posts by msev
Registered User
Does the aeroplane mode also include autolevelling? or is that only available for copters?
Old Jun 20, 2012, 09:20 PM
Brainanator is offline
Find More Posts by Brainanator
Registered User
I put one of backorder. Wonder how long it'll take HK to restock... I know I won't hold my breath
Old Jun 20, 2012, 10:12 PM
simonk is offline
Find More Posts by simonk
hacker
Quote:
Originally Posted by kapteinkuk View Post
The gadgets-freaks will not pitch a tent over this one, It is the same, tired old AVR-chip. (Sorry TC ) However, it runs on a 20MHz crystal, so output resolution and jitter is better than before.
Hi, kapteinkuk! Good to see that it has a 20MHz crystal and an ESC calibration mode! I'd probably want to add CPPM input mode so that we can just buy a simple receiver and only connect the one signal wire. It needs reordering support for some radios, but it's not that difficult otherwise.

Are the lines drawn between the motors not quite perfect in the picture, or is that just bad image scaling?
Old Jun 20, 2012, 10:13 PM
bigbro3760 is offline
Find More Posts by bigbro3760
Registered User
me too. hope they have it asap
Old Jun 20, 2012, 10:33 PM
Hasher66 is offline
Find More Posts by Hasher66
If it ain't broke, fix it.
Hasher66's Avatar
Here's another buddy code for those of you who what to get a discount on your back orders:

http://www.hobbyking.com/buddy.asp?c...8-CE1EDE08EF6F

This one is from my account and hasn't been used yet. Remember, you have to be logged in first before you click on the link. It drops the price to $18.54 US.

Cheers!
Old Jun 20, 2012, 11:42 PM
brettwal is offline
Find More Posts by brettwal
Anti-Gravity
Anyone else have a buddy code? I can't seem to get the lower price.
Old Jun 20, 2012, 11:46 PM
QiW is offline
QiW
Find More Posts by QiW
QiW
Registered User
Quote:
Originally Posted by Hasher66 View Post
Here's another buddy code for those of you who what to get a discount on your back orders:

http://www.hobbyking.com/buddy.asp?c...8-CE1EDE08EF6F

This one is from my account and hasn't been used yet. Remember, you have to be logged in first before you click on the link. It drops the price to $18.54 US.

Cheers!
the buddy codes did not work ...
and they have now limited it to 1 unit PER SALE !!!
that mean if u want 2 units u will have to make 2 orders
more shipping revenue for them
great ... no working buddy codes & 1 unit per sale

Old Jun 20, 2012, 11:59 PM
Hasher66 is offline
Find More Posts by Hasher66
If it ain't broke, fix it.
Hasher66's Avatar
Quote:
Originally Posted by brettwal View Post
Anyone else have a buddy code? I can't seem to get the lower price.
Sorry about that. Somebody must have already used it. I checked it to make sure it was working before I posted it. It appears to be dead now.
Old Jun 21, 2012, 01:17 AM
primeri is offline
Find More Posts by primeri
Registered User
Appearently they removed the buddy codes for kk2.
Old Jun 21, 2012, 01:35 AM
bigbro3760 is offline
Find More Posts by bigbro3760
Registered User
ow, good for me. i was able to order with buddy code
Old Jun 21, 2012, 01:44 AM
BenHayat is offline
Find More Posts by BenHayat
Always Excel >>>
BenHayat's Avatar
They're going to make a lot of these boards and they will offer discount again. Let's just hope it works right :-)


Thread Tools