Originally Posted by --Oz--
I seen the nice protection box that is specifically made for the KK2 but is almost the cost of a new KK2 after shipping to the USA.
I came across this box witch needs some slight modding. Cut height down 1/2 inch or so, open up the bottom to be able to view the LCD and buttons access. Another hole for the buzzer and a couple of holes for zip tie it down to the quad frame. You leave the KK2 in the black foam that is came in, then slide the box over the top of the KK2 and zip tie to frame. They are very sturdy boxes, I had a 300lb friend step on the box, no problems.
PN Stanley Vidmar BN-25-44 (black version is CBN-25-44)
Plastic Bin 3 Inch X 3 Inch X 2-1/8 Inch
Couple of places to find them is;
I will probably install my FrSly D6FR 6ch Rx in the box also, photos coming when done.
I finished my KK2 protection box. Just need to add LED's to the arms and landing gear.
I used a Dremal tool with router bit and quickly carved out the stock Anti-static foam to accommodate the wires (Rx to FC, FC to ESC, buzzer and telemetry wires) and 6ch FrSky D6FR Rx. It is mounted with 4 zip ties and is semi clean looking (comparing to my old setup). This box is robust, easily hold 300 lbs weight straight down.
Now to final tune my scratch-build 400mm quad with the excellent KK2. Thanks for all the help guys!