Thread Tools
Nov 09, 2012, 10:43 PM
Qualified
JohnVH's Avatar
Just got mine today. It's loose too.
Sign up now
to remove ads between posts
Nov 09, 2012, 10:48 PM
Registered User
Quote:
Originally Posted by TheFernMan
Nice hex there, what's your setup? Where did you get the tall landing skid?
I got the landing skids from GLB

Full parts/setup is:

Talon V2 Hex
RCTimer 2830 1000kv motors
RCTimer 30A ESC (SimonK)
Gemfan 8x4.5 props
Goodluckbuy Landing Gear
Dragonlink RC
KK2 - 1.4FW
3300mah 4 cell batteries
Racewood VTx 1280MHz 500mw
DIY Cloverleaf antenna
Nov 09, 2012, 11:28 PM
Dixie Normious
Eastcoast78's Avatar
Quote:
Originally Posted by rcroadtrain
I almost fall into this category.. I've just bought the FC, and started looking thru this thread, but there's so much of it..
I remember someone (KK himself?) doing a how-to video, displaying the relevant P&I adjustments on the previous boards (KK2.1, 5.5)

a simple walk-through like that for noobs like me would be fantastic!
check the vids on the first page///';0)
Nov 10, 2012, 12:19 AM
Registered User
rcroadtrain's Avatar
,,told you I was a noob!!
Nov 10, 2012, 01:46 AM
RC pilot by soul
F450 flying with KK2.0 V1.5:

F450 quad flying in Horon with KK2.0 V1.5 firmware (5 min 55 sec)
Nov 10, 2012, 01:54 AM
Dixie Normious
Eastcoast78's Avatar
cool i like the foam legs, was thinking to do this when the snow comes here. Dont think you have that Problem though.

Board works great on the back like that doesn't it..im hoping to get out and get some flying in in the next few days.

P.S
love your jet videos
Nov 10, 2012, 02:40 AM
Registered User
Quote:
Originally Posted by i3dm
Hello
Can you tell me what skid you have please ??????
Thanks
Nov 10, 2012, 03:13 AM
Registered User
Quote:
Originally Posted by oyibox
Would you guys like to having all KK2.0 firmwares & docs in Google code?

here you go : http://code.google.com/p/kk2-0/downloads/list

Feel free to comment.
thanks but it is easier to find all info in post#1 if KK put it there, that is the best place
Nov 10, 2012, 05:47 AM
RC pilot by soul
Quote:
Originally Posted by vivazapata
Hello
Can you tell me what skid you have please ??????
Thanks
Chepest one i could find

http://www.hobbyking.com/hobbyking/s...era_Mount.html
Nov 10, 2012, 05:48 AM
RC pilot by soul
Quote:
Originally Posted by Eastcoast78
cool i like the foam legs, was thinking to do this when the snow comes here. Dont think you have that Problem though.

Board works great on the back like that doesn't it..im hoping to get out and get some flying in in the next few days.

P.S
love your jet videos
Thank you !
Nov 10, 2012, 06:23 AM
Registered User
Quote:
Originally Posted by i3dm
Thanks a lot
Nov 10, 2012, 07:27 AM
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by vivazapata
Thanks a lot
You can check these out too. Same price. Tall Landing Skids
Nov 10, 2012, 07:52 AM
BNUC-s
biggles uk's Avatar
Am I right in thinking that the lower the p gain and p limit in the self level settings, the less effect your stick inputs have
Nov 10, 2012, 09:35 AM
Registered User
Thought I'd share something here as well. KK2.0 with a V1.5. x550 camera frame that only has the pitch axis controllable. Starting my H-copter build soon...

Drifting session with skycam (3 min 42 sec)
Nov 10, 2012, 10:50 AM
Qualified
JohnVH's Avatar
questions, just got my 2.0 board today, been flying my tricopter RCE V2.5 on the 2.1 board.

I notice in the tricopter settings in the 2.0 board that the front two motors counter rotate, mine do not, will it still work?

Self level, is there any reason to not have it on all the time?

Do I need to flash in the tri acro firmware, or is it responsive on the factory programming?

Thanks!