The setup about this wooden quad-copter - RC Groups
Thread Tools
Jun 20, 2012, 06:26 AM
Registered User
Help!

The setup about this wooden quad-copter


I have got a wooden quad-copter frame(550mm), and want to get it fly. but i dont know what size of motor, ESC, battery, props need to buy?
anyone can give me some advice? thank you !
Sign up now
to remove ads between posts
Jun 20, 2012, 09:37 AM
Registered User
I reckon motors around the 800/900kv mark with 10x45 props and 25a escs should do the trick. Battery wise I'd go for 2200mah 30c and upwards.
Jun 20, 2012, 06:36 PM
Registered User
That should work good. I had a 500mm wooden quad frame with DT750 750kv motors, 18 amp ESCs, 3S 2200mah 40C battery, and 10 x 4.5 props. Weight was 1.1kg. Hovered at about 55%. Flew real good, I was going to switch to 11 x 4.7 props, but I built a tricopter instead.
Jun 20, 2012, 10:24 PM
Registered User
Many thanks to you,
Giek2000 and Dave8888
so the setup is 1000kv motor, 25A ESC, 10*4.5 props, 2200mAh 3S 30C LiPO.
Jun 20, 2012, 10:46 PM
Registered User
Quote:
Originally Posted by hotpicks
Many thanks to you,
Giek2000 and Dave8888
so the setup is 1000kv motor, 25A ESC, 10*4.5 props, 2200mAh 3S 30C LiPO.
I would go with a 40C battery and don't buy no-name props off of ebay. They suck. I am going to check out Gen Fans. I hear good things about them.
Jun 21, 2012, 07:48 PM
Registered User
Using Gemfan here too. Can't say much about balancing them as I mostly slap them on my copter and fly but haven't had any problems with them so far.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion So, I'm Thinkin' About a Quad Copter... Highflight Life, The Universe, and Politics 18 Jun 04, 2012 08:08 PM
New Product How about this quad-coptor for aerial photography? Ideafly Aerial Photography 116 Apr 17, 2012 05:46 PM
Discussion Question about flying a quad copter MantisToboggan Multirotor Drone Talk 0 Feb 01, 2012 09:55 AM
Discussion A couple questions about my FPV quad copter wac FPV Talk 3 Dec 28, 2010 10:07 AM
Discussion First steps to take about DIY quad-copter bearSprockCog Beginner Training Area (Heli-Electric) 1 May 17, 2010 02:47 PM