Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jun 19, 2012, 03:37 AM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
Discussion

CNC Machined Quad Arms?


Hey guys,
I recently have been getting into quad's over tri's and I have a quad arm machined from 6061 aluminum off of my diy cnc and I was wondering what ya guys think! I would be happy to make a few to sell at a modest price. Just wondering if any of you guys have any interest in these.
Obviously I would make sets btw,

Specifications:

Length- 8.5"

Width- 1.25"

Thickness- .25"

Can fit suppo 18a esc snug in recessed part of the arm

Weighs about 1.5oz Approx. (Can't find my scale)
RCG Plus Member
Sign up now
to remove ads between posts
Old Jun 19, 2012, 04:56 PM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
Anyone?
RCG Plus Member
Old Jun 19, 2012, 04:59 PM
Steph280 is offline
Find More Posts by Steph280
1.21 Gigawatts!
Steph280's Avatar
looks nice! are you going to make matching center plates?
Old Jun 19, 2012, 05:26 PM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
Yes I hope so. I just wanted to know if anyone would be interested before I crank them out.
RCG Plus Member
Old Jun 19, 2012, 06:25 PM
giek2000 is offline
Find More Posts by giek2000
Registered User
I would definitely be interested if I didn't already have a third quad to finish Like the design a lot.
Old Jun 19, 2012, 09:11 PM
ndfly700 is online now
Find More Posts by ndfly700
RCGroups Heli Editor
ndfly700's Avatar
Interesting...go on...
RCG Plus Member
Old Jun 19, 2012, 09:21 PM
vodanh1982 is offline
Find More Posts by vodanh1982
Registered User
I am interested in a hexa or octo but I need to know the price first.
Old Jun 19, 2012, 09:28 PM
mailman35 is offline
Find More Posts by mailman35
Registered User
yeah a center plate would be nice.
Old Jun 19, 2012, 09:31 PM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
Don'y worry, I'll be making center plates too. I just finished up all for a few minutes ago so I will post pictures later on today. I just wanted to give you guys a heads up on this because I probably wont begin to sell the first kit until this weekend. I would like to finish up the center chassis first and do a review on it. Thanks for all of your interests and PM me for individual jobs off topic to the quads please.

Thanks again,
Max Kauker
RCG Plus Member
Old Jun 19, 2012, 11:01 PM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
One last thing, i will try to do a build log of this quad and post it on the groups for y'all to enjoy.
This should only be a day or two away.
RCG Plus Member
Old Jun 19, 2012, 11:51 PM
tgreening is offline
Find More Posts by tgreening
It Eats Vets
tgreening's Avatar
They look pretty nice but being aluminum I'd be a bit concerned about their ability to maintain and/or return to their original static state when they are used in an application where they are subjected to periodic or even repeated sudden deceleration events, if you know what I mean.
Old Jun 20, 2012, 01:58 AM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
Yeah I completely understand. Aluminum is alot stronger than you would think though. I try to bend these with all of my strength and can't do it. I am thinking about making a test arm and video me trying to destroy it by use of gravity if you know what I mean
RCG Plus Member
Old Jun 20, 2012, 03:44 AM
noxnflame is offline
Find More Posts by noxnflame
Registered User
noxnflame's Avatar
One last question to through at you guys. What would be the color of choice for the center chassis for a quad? I can get,
Blue
Red
Black
White
Grey
Green Or
Purple

Sorry guys, By looking at my plastic stock pile, only have enough for the demo.

I'll be ready by next week though.
RCG Plus Member
Old Jun 20, 2012, 01:47 PM
tgreening is offline
Find More Posts by tgreening
It Eats Vets
tgreening's Avatar
Quote:
Originally Posted by noxnflame View Post
Yeah I completely understand. Aluminum is alot stronger than you would think though. I try to bend these with all of my strength and can't do it. I am thinking about making a test arm and video me trying to destroy it by use of gravity if you know what I mean


You might just want to put one together and drop it off your roof. Trying to do it by hand is a lot like using a hammer to push in a nail. It just isn't quite the same.
Old Jun 20, 2012, 02:05 PM
actionplus is online now
Find More Posts by actionplus
Registered User

Build


Quote:
Originally Posted by noxnflame View Post
One last thing, i will try to do a build log of this quad and post it on the groups for y'all to enjoy.
This should only be a day or two away.
Cool. Will look for it.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion CNC Open Rail: machine rail blindflight CAD/CAM 1 Jun 09, 2012 01:49 AM
Discussion Small CNC Machining Chris Moon The Builders Workshop 11 Jun 02, 2012 06:53 PM
Discussion Making Reusable Molds with CNC Machined Foam and Stretchelon Bagging Film AcmeAircraft Composites Fabrication 6 Apr 30, 2012 02:50 PM
Wanted stepper motors for 3 axis cnc machine snolord1 Non R/C Items (FS/W) 0 Mar 25, 2012 08:58 PM
For Sale Tricopter CNC Machined Chassis noxnflame Aircraft - Electric - Multirotor (FS/W) 3 Feb 25, 2012 01:32 PM