NQD Tear Into Boat
I saw your post on the moded NQD Boat. I have one and have completely gutted it and removed everything out and off of it. I boght a Water Cooled Birdie 50A ESC, A Water Cooled 4800KV Brushless Inrunner Motor, a 9G servo, New 3 Channel Receiver 2.4Ghz. After reading a bunch of posts and threads on others mods I am worried that I may have gone a little over kill on the Motor. I have read that if I spin the Jet/Prop to fast it can break or the boat just cavitates. I was wondering what you think I should run as far as a battery with this setup if I indeed need to tone down the motor. I fly planes and have a bunch of different batteries. I have everything from a 1300-MAH-20C-11.1V up to 4000-MAH-4C-14.8V. I am thinking I need to run the 11.1V. I'm also worried about sealing everything. What did you use to glue/install parts. I have 2 different types of RTV high tempature water proof silicone/gasket sealer. I would appreciate any and all of your thoughts and input. All of my parts are in and I wanted to put it toghter this weekend.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Cool||Best $10 I ever spent on a work light!!||FiremanBill||SEFF 2011||3||Apr 26, 2011 02:54 PM|
|Discussion||Vapor BNF - Best Money I Ever Spent||sr71fan||Micro Ready-to-Fly||25||Jul 25, 2008 09:02 AM|
|Best 20 Bucks I ever spent. Speedy 163||Reverend||Parkflyers||25||Apr 23, 2004 11:52 AM|
|Pico Jet: Best $45 I ever spent.||yb2normal||Foamies (Kits)||4||Jul 09, 2001 12:20 AM|