Trader Rating: 12
clone MK 2.x All in One FC boards $180
before you read on, the FETs on some of the ESCs need to be replaced, so you will need to be somewhat familiar with DIY MK stuff. It's not hard, but it is not for someone trying to build their first quad.
The FETs are common and can be purchased at MK dealers or electronic supply houses for about $1.65/ea.
i get 3 blinking lights on 2 of the escs and 5 on another.
3 blinks mean: Short circuit Phase C ( against B ) -> ESC not ready
5 blinks mean: Mosfet NB- doesn't always shut off
the boards are otherwise fine. they are recognized by koptertool and all gyros/accels respond.
the red board is the v2.x with 4 built in escs
the blue board is a 4 esc board
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||MK, Navi,Mag and GPS and clone 2.0 FC||G-unit||Aircraft - Electric - Multirotor (FS/W)||4||Mar 30, 2012 02:41 AM|
|Sold||Alternative FC2.0 board all in one board + 1 all in one mkbl board||noppita||Aircraft - Electric - Multirotor (FS/W)||1||Jan 29, 2012 11:48 PM|
|Sold||MK 1.34 FC w/Version 78.b+(6)1.2 clone BLs+PPM For Hexacopter||Z06 Tony||Aircraft - Electric - Multirotor (FS/W)||5||Jan 29, 2012 07:16 PM|
|Wanted||AfroCtrl or MK clone FC boards or Mk clone ESC's||kaz1104||Aircraft - Electric - Multirotor (FS/W)||0||Oct 24, 2011 04:13 AM|
|Discussion||All-in-one 2.4GHz receiver/brushlessESC/servos on one board (microbricks)||Little-Acorn||Scratchbuilt Indoor and Micro Models||3||Sep 25, 2011 08:14 PM|