this is my own design of a small trainer - RC Groups
Thread Tools
Jun 14, 2012, 12:19 PM
Registered User
essadiq's Avatar
Discussion

this is my own design of a small trainer


hello
i designed my own design
and i wanna post it here ....to be checked by the members
Sign up now
to remove ads between posts
Jun 14, 2012, 12:53 PM
who put that tree there
dazza44's Avatar
post it in scatchbuild foamies,
youll get good info there.
Jun 14, 2012, 05:00 PM
Registered User
essadiq's Avatar
yes i have posted it in but no one participe
Jun 14, 2012, 05:14 PM
who put that tree there
dazza44's Avatar
just go ahead n build it,then you can learn from there what needs to be altered,
be a good learning curve..
i was the same starting out building my own,
heres a cpl of recent builds i did..
Jun 15, 2012, 12:10 PM
Registered User
Yes. Built it and try it. Make sure that it balances about 25% back from the leading edge.
Jun 16, 2012, 06:32 AM
Registered User
Andy W's Avatar
Loads of info if you search, especially in the scratchbuilt forum.

I assume you've already learned to fly? Learning on a model of your own design might be a challenge, but if you've mastered flying, you shouldn't have much trouble..
..a
Jun 16, 2012, 07:54 AM
Registered User
flypaper 2's Avatar
Add the ailerons in your wing dimensions as they are considered as part of the wing area when you balance for CG. CG should be 25 to 30% of the wing width or chord. Build as light as possible.

Gord.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Designing my own Woody ak79 Thermal 213 Jun 12, 2013 09:58 AM
Gallery My own design mrexcel Scratchbuilt Indoor and Micro Models 4 Feb 22, 2012 03:27 PM
Build Log My Litt'le Gal2 - 28"WS first own design build timatworksg Foamies (Scratchbuilt) 8 Dec 21, 2011 05:56 AM
Discussion My own design B-2 stealth with Ducted prop sukhoidave Pusher Prop Jet Models 1 Oct 31, 2011 04:17 PM