Thread Tools
Aug 01, 2012, 02:39 AM
Registered User
Covering the compound curves of the stringered aft fuselage with doculam is a pain. Having to do it in small sections, very tedious.
Sign up now
to remove ads between posts
Aug 01, 2012, 02:51 AM
Tally Ho Chaps!
Chompwat's Avatar
Phil, please could you explain the axle set up in a little more detail. I would like to build some suspension in to my build. At present I have a completely rigid set up which is pretty hefty. Considering we are working in the same scale your gear looks a lot lighter. Thanks, Gavin.
Aug 01, 2012, 05:38 AM
What's 3D?
trumps's Avatar
looks great mate, i don't know if the Airodrome Abli is the same setup as their Pfalz but if it is and the undercart has a ply type spreader by the time the axle is lashed down to the center of it the outers spring quite nicely with a pit of hat elastic around the ends for looks.

Craig
Aug 01, 2012, 04:39 PM
Registered User
Trumps, the Aerodrome Albi plans show the uc as all 1/16 music wire with a spreader glued over the fixed axle. I like your Pfalz set up. What I did for mine isn't scale, but should work for a suspended axle without adding much weight.
Aug 01, 2012, 05:06 PM
Registered User
Quote:
Originally Posted by Chompwat
Phil, please could you explain the axle set up in a little more detail. I would like to build some suspension in to my build. At present I have a completely rigid set up which is pretty hefty. Considering we are working in the same scale your gear looks a lot lighter. Thanks, Gavin.
Are you building the aerodrome kit? The Aerodrome kit has a uc of 1/16 music wire, and is about as light as can be. I have replaced the 1/16 fixed axle with 1/8 carbon fiber inside an aluminum tube, to have a suspended live axle. this adds about a tenth of an oz. to the build.

The aluminum tube/bushing was replaced once on my Fok DRI. It had to be straightened another time. An aluminum bushing will hold up to normal landing conditions.
Last edited by phillip57; Aug 01, 2012 at 05:22 PM.
Aug 01, 2012, 05:18 PM
Registered User
My setup isn't scale, it doesn't provide for a spreader. However, these pics indicate that not all Albatros DV's were exactly the same in the uc department
Aug 02, 2012, 02:40 AM
Tally Ho Chaps!
Chompwat's Avatar
Thanks for the detail Phil, that's really helpful and has given me some ideas. No, my build is an SE5a from plans but is in the same scale. The u/c is 12swg wire with 10 swg axle and weighs a ton. I am looking to save weight and would like to introduce some suspension. I see no reason why your live axle wouldn't work and will undoubtedly steal some of your ideas to try.
The planking looks amazing by the way!
Aug 02, 2012, 07:40 AM
Registered User
Quote:
Originally Posted by Chompwat
Thanks for the detail Phil, that's really helpful and has given me some ideas. No, my build is an SE5a from plans but is in the same scale. The u/c is 12swg wire with 10 swg axle and weighs a ton. I am looking to save weight and would like to introduce some suspension. I see no reason why your live axle wouldn't work and will undoubtedly steal some of your ideas to try.
The planking looks amazing by the way!
Thanks, but my method wouldn't work if I was going for the varnished wood look.
Aug 07, 2012, 10:18 AM
Registered User
The uncovered aft fuselage was flimsy, and difficult to cover without wrinkles. As more of the aft fuse was covered, it became more rigid enabling larger ares to be covered without wrinkles.
The strip where the horizontal fin will be glued was left bare, so the fin will adhere to the frame, not the covering.
Aug 08, 2012, 06:09 PM
Registered User
Can't do much more until the wings are framed up...
Last edited by phillip57; Aug 09, 2012 at 10:48 AM.
Sep 08, 2012, 06:44 PM
Registered User
Solartex strips are used for the aileron hinges, a drop of ca on either side secures them. Should've done this with the tail surfaces.
Sep 08, 2012, 07:18 PM
The "pro" in procrastination
Steve85's Avatar
Nice work, Phil.
Sep 09, 2012, 04:10 AM
Registered User
floss's Avatar
Quote:
Originally Posted by Chompwat
Phil, please could you explain the axle set up in a little more detail. I would like to build some suspension in to my build. At present I have a completely rigid set up which is pretty hefty. Considering we are working in the same scale your gear looks a lot lighter. Thanks, Gavin.
Heres how the original looked. Live axles save me a good amount of repairs I think

Nice build.

Steve


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 1/3 scale Albatros Dv or Dva spinner mcjustis Aircraft - General - Miscellaneous (FS/W) 3 Oct 29, 2014 12:40 PM
Sold Aerodrome RC 54" Albatros D.Va Kit Wolpertinger Aircraft - Electric - Airplanes (FS/W) 2 Apr 16, 2012 08:52 AM
Build Log 1:24 scale DVa Albatros - non ar6400 nemoskull Scratchbuilt Indoor and Micro Models 3 Apr 10, 2012 02:10 PM
AerodromeRC 36" Albatros DVa AerodromeRC Scale Kit/Scratch Built 0 Jul 24, 2005 03:07 PM