P.A. Addiction d/r,expo settings - RC Groups
Thread Tools
Jun 12, 2012, 08:53 PM
Registered User

P.A. Addiction d/r,expo settings

Hello,l just bought a used Addiction with no manual and for the life of me I cannot find d/r and expo settings anywhere online,I dont know why P.A. doesnt have the manuals available for download on their website like everyone else but whatever...,can anyone help with the settings?.I found a couple of threads here regarding this but no info.was posted.
Sign up now
to remove ads between posts
Jun 12, 2012, 09:25 PM
Registered User
tacx's Avatar
Took me two seconds.

Jun 12, 2012, 09:30 PM
Registered User
Yeah Thanks,found that as well but my meter is in only inches and mm.,the expos are a help but really need it in mm or inches
Jun 12, 2012, 09:44 PM
Registered User
You could go buy a drawing protractor http://www.google.com.au/search?q=dr...w=1920&bih=939 you can pick them up for less than a $ from most Newsagents or similar. Or you could do some trigonometry.
Jun 13, 2012, 12:01 AM
Registered User
tacx's Avatar
This may help.

Lets use ailerons as an example.

Pick a spot on your aileron to do the measuring.

Measure the width of the aileron at that point. You must use this point to measure your throws, because you have tapered ailerons.

So, lets say the spot you pick is 2 inches wide.

At 45 degrees (which is their suggested high rate) your throw in both directions is 2 inches. Thats 2 up and 2 down.

At 22 1/2 degrees (they call for low rates to be 25 degrees, but 22 1/2 is close enough) your throws would be 1 inch. Half of the 2 inch high rate.

You can use this method on your rudder and elevator.
Jun 13, 2012, 10:45 AM
Lysdexic I'm
HeeBeeGeeBee's Avatar
There is also a huge thread on the Addy here...
I'm sure you'll find somone with a manual there. If I were at home, I'd have all the info you need.
Jun 14, 2012, 10:09 AM
Registered User
Andy W's Avatar
It's kind of assumed at this level that you know what will work and can set the model according to your skills. There's not much benefit to having surfaces move more than 45 degrees in each direction, so that's where I set mine, and so that you have a lower setting in case it's a bit twitchy, set D/R to 50%. If you're a bit ham-fisted on the sticks, you may find using expo helps but better to learn to use small stick inputs. Of course, this probably isn't the model to learn that particular skill on!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question D/R and Expo settings for Eflite Mini Ultra Stick as first balsa? demuddy Sport Planes 25 May 04, 2012 06:05 PM
Link 3D Without expo's or d/r -HD- nonamerc 3D Flying 0 Apr 15, 2012 04:10 AM
Cool Devo 7 D/R Expo vs Travadj cammauto Micro Helis 2 Feb 27, 2012 11:52 AM
Discussion Help with setting up D/R Expo in Acro Helijib Multirotor Drone Talk 1 Feb 27, 2012 10:07 AM
Help! is it better to set th d/r low or the expo high nashiem Electric Heli Talk 7 Feb 16, 2009 02:26 AM