Thread Tools
Nov 07, 2003, 09:06 PM
Registered User

Giles 200 3D Foamy


Hey All

Here is some pics and info on my new design Giles 200 3D Foamy.

Specs:

Giles 200 3D

Wingspan: 38"

Fuse length: 36"

Motor: Hacker B20 15L

Battery: Thunderpower 2100mAh Lipoly

Servos: Hitec HS-55's

Reciever: Hitec Electron 6


the AUW of the airframe with wire landing gear, gear plate, all CF reinforcement ( 2 CF tubes in wing, 1 in fuse and an additional 5" CF tube in the nose of the plane for mounting the B20, and 1 CF tube in the stab. AUW of the airframe is 5oz

Here are some pics

This is my first foamy I have personally designed, I should have a flight report on Sunday if all goes well and it doesnt rain.

Here are some pics:
Sign up now
to remove ads between posts
Nov 07, 2003, 09:10 PM
40%, 5% whats the diff?
TeamSME's Avatar
Absolutely, positively, amazingly(is that a word), ugly... Just kidding looks awesome josh
Sean
Nov 07, 2003, 09:10 PM
Registered User
Wheelpants
Nov 07, 2003, 09:14 PM
Registered User
Here it is from another angle, As you can notice the polyurathane glue overfoamed a bit, this is my first time building a Foamy with Polyu glue, and my 2nd foamy i've ever built, So im still learning to control the Poly glue.

So forgive the sloppyness, im going to clean it up some, but it sort of acts as tri stock and makes the wing-fuse joint real strong!

I still have to airbrush it, so its all white for now.


Josh
Nov 08, 2003, 12:13 AM
Registered User
I didnt want to wait till tommorow to airbrush it, so I just hand painted it, Im rigging it as we speak, and I hope to fly it tommorow

What do you think of the scheme???

Josh
Nov 08, 2003, 04:48 AM
Registered User
looks good
got any plans for it
hope it flys well
Nov 08, 2003, 08:13 AM
GenesisCreation's Avatar
Really good looking plane Josh! Looking forward to flight report.
Nov 08, 2003, 09:43 AM
Registered User
Quote:
Originally posted by daron
looks good
got any plans for it
hope it flys well
Yes I have plan's but I drew it on drafing paper, so im going to have to convert them to PDF.

Josh
Nov 08, 2003, 04:16 PM
Registered User
Well its all RTF, the RTF weight is 16oz ( I know its heavy) with a 3S2P 2400mAh pack ( Had to use it instead of the thunderpower, for balance, I will modify plans to fix balance) Home made wheelpants, landing gear , 2x2" Landing gear mounting light ply plate, painted on scheme, (1) servo Per aileron, and the B20 15L.

Im waiting for the wind to die down, to maiden it, wind's are gusting at about 25mph right now.

Josh
Nov 08, 2003, 04:41 PM
Registered User
Just flew it, needless to say TOO WINDY.

Took off in about 3 feet and flipped verticle, had to fight it to keep it level, it feels like it will be a very good plane though. Landed it with no damage.

I will get a BETTER flight report when the wind dies down!
Josh
Nov 08, 2003, 05:50 PM
Registered User
Got some more flights on it.

The 30MPH wind is warping the wing, so its jumping up and down.

I busted my pretty wheelpants on the last landing, the wind made it yaw and it slide sideways, folded the gear up, and tore the wheelpants off, Oh well I'll make more!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 3D Foamy Giles G202 Pro Cudaboy 3D Flying 4 Jan 16, 2006 04:01 PM
Is there a best 13 oz 3D foamy for OUTSIDE? flipinflopin 3D Flying 9 Jan 29, 2004 10:23 AM
Giles 202 3D YZYgold Sport Planes 6 Sep 03, 2003 04:41 AM
FS Velkom Mini Giles 200 Molded havin fun Aircraft - Electric - Airplanes (FS/W) 9 Jan 17, 2003 10:28 PM
Velkom Giles-200 anyone?? Steve H. Sport Planes 28 Jan 30, 2002 09:07 PM