Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jun 12, 2012, 11:12 AM
caotri is offline
Find More Posts by caotri
Registered User
Discussion

New rctimer motor 4215 (3507) , anyone try it yet


Hi all,
I plan to make an Y6 for Ap and llok at this rctimer new motor which look cool and good price also http://www.rctimer.com/index.php?gOo...9&productname=
Just want to ask your idea.
If someone tried it please give some commnet , Thanks
caotri
Sign up now
to remove ads between posts
Old Jun 12, 2012, 11:57 AM
rimshotcopter is offline
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
I like the prop mounting over the 5010s. Would love to give these puppies a spin around the park but the bank account say No.
Old Jun 12, 2012, 12:57 PM
Efliernz is offline
Find More Posts by Efliernz
I'll fly anything...
Efliernz's Avatar
Looks like they have used the same small bearings like they use in the 2836/11 motors. I hope not as they do not last. I've bought dozens of motors from RCT but the quality seams down a bit over the last 6 months.

Pete
Old Jun 12, 2012, 01:00 PM
rimshotcopter is offline
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
One word, Boca Bearings.

I get the 99 cent specials.
Old Jun 13, 2012, 03:36 AM
caotri is offline
Find More Posts by caotri
Registered User
Still want to give a try but my bank is empty now :-((
Old Jun 13, 2012, 04:53 AM
Guntars is offline
Find More Posts by Guntars
Registered User
I want to try them also, but not sure what is the prop adapter diameter.
Old Jun 15, 2012, 01:05 PM
redblur is offline
Find More Posts by redblur
Registered User
anyone tested this motor yet?
Old Jul 29, 2012, 10:35 AM
rukie is offline
Find More Posts by rukie
Registered User
rukie's Avatar
I did and it was bad... 2 out of the 4 motors have bent shaft giving it serious vibrations. Ill try balance it though and see what happens
Old Jul 30, 2012, 10:19 AM
caotri is offline
Find More Posts by caotri
Registered User
Thanks Rukie for information. However the shaft is very short. how can it bent?
any pics please.
Old Jul 30, 2012, 10:25 AM
rukie is offline
Find More Posts by rukie
Registered User
rukie's Avatar
Ill try to post asap though I doubt if it can bee seen, I really dont know why it was bent you can see it evidently when its turning specially when the screw is on it.

tested vibrations with my ipad (iseisometer), and its conclusive that vibrations are present with the prop adapter attached.
Old Jul 31, 2012, 11:41 AM
rukie is offline
Find More Posts by rukie
Registered User
rukie's Avatar
Hi caotri just an update i managed to solve the problem with the adapter. Turns out it was not bent rather, the adapter did not sit flat on the motor due to poor machine finish. I promise to post pics of it tomorrow so you would have a better picture of what im saying. But sad to say this is a poorly built motor i suggest you buy those specialized motors from hk, or those rctiger 650kv.
Old Jul 31, 2012, 06:21 PM
NutBag is offline
Find More Posts by NutBag
.
NutBag's Avatar
Same here... Bought 5 to try and they are garbage!
Save your money.
RCG Plus Member
Old Jul 31, 2012, 06:25 PM
rimshotcopter is offline
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
Quote:
Originally Posted by NutBag View Post
Same here... Bought 5 to try and they are garbage!
Save your money.
Please, can you be a bit more specific? Looking at the RCTimer's picture of these motors, they look good if nothing else. I know and understand that quality of many items coming from China are in the toilet nowadays, but the cost is still the best I have seen so far.
Old Jul 31, 2012, 07:22 PM
pug398 is offline
Find More Posts by pug398
Registered User
I take a marker and cover the top of the motor where the adaptor sets over. Hold the adaptor against motor and give it a couple of twists. Most of the time I find the problem is they second sourced the adaptors and the hole in the bottom isn't machined deep enough. If this is the case the twisting motion will rub the marker off top of motor. I haven't tried this one but seen it on several others.
Old Aug 01, 2012, 01:35 AM
caotri is offline
Find More Posts by caotri
Registered User
@ all, Thanks for your information, I bought some rctimer 3536 and happy with it that is why I want to try this new disk style motor. It seem I need to thing again.

regards
caotri


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Motor HL W48-22 490KV - Any one try yet? caotri Multirotor Talk 0 Apr 24, 2012 03:53 AM
Question Venom 'Airjet' Quad Motor Jet RC Plane - Anyone Try? demisemiquaver Micro Ready-to-Fly 4 Nov 15, 2011 05:27 PM
Discussion Celectra 4-Port 1-Cell 3.7V 0.3A DC Li-Po Charger Has anyon seen this yet?? bluemeane Micro Ready-to-Fly 9 Aug 20, 2009 10:57 AM
Discussion Anyone try the new GWS brusless yet ? poobs2 Power Systems 29 Jan 22, 2006 09:22 PM
Amybody try a Nemessis motor in a logo yet?? UAVProducts Electric Heli Talk 1 Jan 08, 2005 03:59 PM