Thread Tools
Jun 11, 2012, 12:44 PM
Registered User
Video

Agri-Duck dropping candy


It's time for the West End Wings 34th Annual Father's Day Airshow, so I was practicing this past Sunday.

My dad and I built this last August to drop some serious candy for the little kids at the airshow. It is 110" in span, weighs 25 lbs wet, has a 45cc RCGF 2-stroke for power and is dropping 2.0 lbs of candy in the video. Construction is mostly 3/16th foam board. We re-engineered much of the structure, but not the geometry and general layout.

It's big, loud, slow, and orange...what else could you want?

Hope people like it.
Sign up now
to remove ads between posts
Jun 11, 2012, 06:23 PM
Registered User
Nice. Good landing too.
Aug 20, 2012, 12:14 PM
Registered User
gromitvt10's Avatar
Very cool, i'm building one now. Is your horizontal stab removable? What other mods did you make? I planned on making a "working hopper" on mine.

Kyle
Sep 10, 2012, 03:10 PM
Registered User

Mods


Kyle,

Tail and fuse is all one piece but each wing comes off.

We didn't change the planform lines of the plane, but upped the structure since it was way weak as designed; especially where the wing attached. Use 1/2" or 3/8" aircraft ply for where the wing bolts will go. We also made the wing struts from 2 steel broom handles (from the dollar store); do NOT try the balsa struts at all!

We put a 45cc RCGF engine on it instead of the .61 glow, so more structure was required. Use fiberglass drywall tape along high stress areas on the foam board as you build...it really helped. Use cable rigging from the stab to the fuse to cut down on wiggling.

We made the gear out of pvc. I used 1/4 scale servos for each aileron and rudder, and two standards on the elevator. Used a 6V 2000 Ni-mH
for the flight pack and a separate one for the engine ignition.

Good luck with it.

Herb
Sep 11, 2012, 01:24 PM
Registered User
gromitvt10's Avatar
Herb,
Thanks for the info, mine is about 10lbs lighter than yours. I'm using an electric setup, 2 flights on her so far and she is still in one piece, although i'm still perfecting my power setup. As soon as i get everything squared away i'll start my powder drop runs. Here is my bird.

https://www.rcgroups.com/forums/show....php?t=1725238
Sep 13, 2012, 03:06 PM
Registered User
stevenmurrell's Avatar
VERY NICE landing!!!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Agri-Duck sport hfenn Giant Scale Airplanes 0 Dec 11, 2011 06:45 PM
Discussion Agri-Duck sport hfenn Foamies (Scratchbuilt) 0 Dec 11, 2011 06:38 PM
Discussion Mini Agri Duck; the Agri Duckling! parrot pilot Foamies (Scratchbuilt) 4 Oct 21, 2008 03:24 PM
Build Log Blue Agri Duck Sport Come on in duck fans cars4fun2001 Foamies (Scratchbuilt) 101 Aug 15, 2008 09:16 PM